JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. T. Yan, “A Miniaturized High-Energy Wakefield Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 493-496. 
[n]	M. Otani et al., “Disk and Washer Coupled Cavity Linac Design and Cold-Model for Muon Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1924-1927. doi:10.18429/JACoW-IPAC2019-TUPRB117
[n]	S. Jackson, J-L. Nougaret, and M. Peryt, “Use of WML Technologies for Data-driven Accelerator Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_094. 
[n]	A. Halavanau and P. Piot, “Numerical Investigation of a Cascaded Longitudinal Space-Charge Amplifier at the Fermilab's Advanced Superconducting Test Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1850-1852. doi:10.18429/JACoW-IPAC2015-TUPMA007
[n]	S. Myers and E. Peschardt, “The Efficiency of Acceleration by Phase Displacement in the Presence of RF Noise”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3529-3532. 
[n]	F.-J. Decker, S. Colocho, A. Novokhatski, M. K. Sullivan, and U. Wienands, “Bunch Pattern with More Bunches in PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT130, pp. 842-844. 
[n]	Y. T. Yan, M. Bai, and A. Chao, “Proton Storage Ring Optics Modeling with ac-Driven Betatron Motion”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP022, pp. 4356-4356. 
[n]	A. Halavanau and P. Piot, “Numerical Study of Three Dimensional Effects in Longitudinal Space-Charge Impedance”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1853-1855. doi:10.18429/JACoW-IPAC2015-TUPMA008
[n]	J. P. Sikora et al., “Resonant TE Wave Measurements of Electron Cloud Densities at CesrTA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC170, pp. 1434-1436. 
[n]	M. G. Billing et al., “Status of Electron Cloud Dynamics Measurements at CESRTA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS084, pp. 799-801. 
[n]	M. Klein, A.-S. Mueller, and K. G. Sonnad, “Simulations of the Microbunching Instability at ANKA using a Vlasov-Fokker-Planck Solver”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC095, pp. 2232-2234. 
[n]	S. Arai et al., “Linac Complex in the JAERI-KEK Joint RNB Facility”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE001, pp. 861-863. 
[n]	J. C. Juillard and E. Peschardt, “Phase and Voltage Control in the LEP Radio-Frequency System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1639-1642. 
[n]	Y. T. Yan, Y. Cai, W. S. Colocho, and F.-J. Decker, “Validation of PEP-II Resonantly Excited Turn-by-Turn BPM Data”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS070, pp. 3645-3647. 
[n]	N. Yamamoto et al., “Accelerators of the Central Japan Synchrotron Radiation Facility Project (II)”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC037, pp. 2987-2989. 
[n]	Y. Takashima et al., “Present Status of Accelerators in Aichi Synchrotron Radiation Center”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2877-2879. doi:10.18429/JACoW-IPAC2016-WEPOW023
[n]	K. Tian, J. A. Safranek, and Y. T. Yan, “Machine Based Optimization Using Genetic Algorithms in a Storage Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB1, pp. 430-432. 
[n]	N. Magnin et al., “External Post-Operational Checks for the LHC Beam Dumping System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU023, pp. 1111-1114. 
[n]	L. Faillace et al., “High Gradient Normal Conducting Radio-Frequency Photoinjector System for Sincrotrone Trieste”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODS4, pp. 1504-1506. 
[n]	W. Liu, “HIRFL-SSC TRIM COIL CURRENTS CALCULATION BY CONJUGATE GRADIENTS METHOD”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P32, pp. XX-XX. 
[n]	J.-P. Delahaye et al., “A Staged Muon-based Facility to Enable Intensity and Energy Frontier Science in the US”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA20, pp. 565-567. 
[n]	W. A. van Kampen and J. Liedorp, “A Fast Beam Quality Measuring Device”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 923-926. 
[n]	K. T. McDonald et al., “Target System Concept for a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1568-1570. doi:10.18429/JACoW-IPAC2014-TUPRI008
[n]	W. J. DeHope, D. A. Goerz, R. Kihara, M. M. Ong, G. E. Vogtlin, and J. M. Zentler, “An Induction Linac Test Stand”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT036, pp. 2455-2457. 
[n]	P. Young, “Progress Update on the Development of the 3He Linac for PET Isotope Production”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP26, pp. 113-115. 
[n]	W. Bartmann et al., “Beam Transfer to the FCC-hh Collider from a 3.3 TeV Booster in the LHC Tunnel”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3901-3904. doi:10.18429/JACoW-IPAC2015-THPF089
[n]	B. Goddard et al., “Injection Beam Loss and Beam Quality Checks for the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB066, pp. 1671-1673. 
[n]	G. H. Mackenzie, G. Dutto, R. E. Laxdal, J. B. Pearson, R. Worsham, and M. Zach, “Efficient Extraction of H-Ions from the TRIUMF Cyclotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1710-1713. 
[n]	M. Isaila and K. Prelec, “Heavy Ion Source with Pulsed Magnetic Field”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 85-87. 
[n]	F.-J. Decker, Y. Cai, Y. Nosochkov, Y. T. Yan, and G. Yocky, “Lowering the Vertical Emittance in the LER Ring of PEP-II”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS058, pp. 3621-3623. 
[n]	N. Fuster Martinez et al., “Simulation Studies of Macro-particles Falling into the LHC Proton Beam”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS017, pp. 634-636. 
[n]	S. Takeuchi and M. Matsuda, “First Three Year Operational Experience with the JAERI Tandem-Booster”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A26, pp. 237-247. 
[n]	W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1887-1890. 
[n]	J. W. Xia et al., “Lattice of the CSR”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-05, pp. XX-XX. 
[n]	D. Arenius, “Cryogenic Plants for SRF Linacs”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THIOB01, pp. 811-813. 
[n]	D. Jacquet, R. Gorbonosov, and G. Kruk, “LSA - the High Level Application Software of the LHC - and Its Performance During the First Three Years of Operation”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC058, pp. 1201-1204. 
[n]	J. Kirchgessner, “External Beam Performance at P.P.A.”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 684-688. 
[n]	Z. Zaharieva and R. Billen, “Rapid Development of Database Interfaces with Oracle APEX, Used for the Controls Systems at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP108, pp. 883-885. 
[n]	H. Kabumoto, N. Ishizaki, M. Matsuda, Y. Otokawa, and S. Takeuchi, “Superconducting Twin Quarter Wave Resonator for Acceleration of Low Velocity Heavy Ions”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO093, pp. 849-853. 
[n]	Z. Zaharieva, M. Martin Marquez, and M. Peryt, “Database Foundation for the Configuration Management of the CERN Accelerator Controls Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMAU004, pp. 48-51. 
[n]	A. Sugiura et al., “Improvement of Co-based Amorphous Core for Untuned Broadband RF Cavity”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH124, pp. 1304-1306. 
[n]	A. Halavanau and P. Piot, “Electron Beam Pattern Rotation as a Method of Tunable Bunch Train Generation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3372-3375. doi:10.18429/JACoW-IPAC2018-THPAK063
[n]	A. Halavanau et al., “Transverse-to-Longitudinal Photocathode Distribution Imaging”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3361-3363. doi:10.18429/JACoW-IPAC2018-THPAK060
[n]	N. R. Neveu et al., “Bunch Length Measurements Using CTR at the AWA with Comparison to Simulation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4166-4168. doi:10.18429/JACoW-IPAC2018-THPMF048
[n]	Y. Gomei, K. Nakayama, and S. Sukenobu, “Beam Loss Due to Multiple Scattering with Residual Gases in a Slow Accelerating Electron Synchrotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1527-1530. 
[n]	M. Zerlauth et al., “The LHC Post Mortem Analysis Framework”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP021, pp. 131-133. 
[n]	J. N. Corlett et al., “Superconducting Linac Design Concepts for a Next Generation Light Source at LBNL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO13, pp. 229-235. 
[n]	M. Iwasaki et al., “The Construction Status of the SuperKEKB Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 14-17. doi:10.18429/JACoW-ICALEPCS2015-MOB3O04
[n]	N. Ouchi et al., “R&D Activities for Superconducting Proton Linac at JAERI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D003, pp. 77-79. 
[n]	K. Furukawa et al., “Control System Achievement at KEKB and Upgrade Design for SuperKEKB”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOBAUST05, pp. 17-19. 
[n]	H. Padamsee et al., “Does UHV Annealing above 1100C as a Final Surface Treatment Reduce Field Emission Loading in Superconducting Cavities?”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-35, pp. 397-399. 
[n]	F. Sakamoto et al., “Development of the High Resolution Electron Beam Profile Monitor for Medical Use X-Band Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11020, pp. XX-XX. 
[n]	W. A. van Kampen and H. W. Schreuder, “Changing the Harmonic Number in a Synchrotron during Acceleration”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1018-1020. 
[n]	J. C. Garnier et al., “System Relation Management and Status Tracking for CERN Accelerator Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC030, pp. 619-622. 
[n]	D. Wang, C.-X. Tang, W. Gai, C.-J. Jing, J. G. Power, and J. Q. Qiu, “Effect on Beam Dynamics From Wakefields in Travelling Wave Structure Excited by Bunch Train”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 289-292. doi:10.18429/JACoW-IPAC2015-MOPJE001
[n]	X. P. Ding, H. G. Kirk, and K. T. McDonald, “Particle Production of a Graphite Target System for the Intensity Frontier”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2692-2694. doi:10.18429/JACoW-IPAC2015-WEPJE010
[n]	A. Macpherson et al., “Diagnostic Developments at CERN's SRF Testing Facility”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB080, pp. 778-782. 
[n]	A. Wolski, B. Militsyn, M. Johnson, M. King, and P. Williams, “Transverse phase space tomography using machine learning at the CLARA accelerator test facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4851-4854. doi:10.18429/JACoW-IPAC2023-THPL170
[n]	A. Halavanau et al., “Bunch Compression of Flat Beams”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3368-3371. doi:10.18429/JACoW-IPAC2018-THPAK062
[n]	A. D. Bross, S. Geer, H. G. Kirk, V. D. Shiltsev, and M. S. Zisman, “Muon Cooling R&D for the Muon Collider - A Five-year Plan for the US”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCIO01, pp. 46-50. 
[n]	E. Viklund, T. Hara, M. Omet, K. Umemori, and R. Katayama, “Vertical test results for ITN single cell cavities”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 125-129. doi:10.18429/JACoW-SRF2025-MOP34
[n]	A. Takagi, Y. Mori, J. Nakano, M. Sugaya, and T. Uesugi, “Radio Frequency Acceleration System for 150MeV FFAG”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB020, pp. 1231-1233. 
[n]	D. L. Friesel, T. E. Ellison, W. P. Jones, and R. E. Pollock, “A Low Energy Storage Ring for Pulse Stacking at IUCF”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper C04, pp. 207-210. 
[n]	M. Omet, R. Katayama, and K. Umemori, “Recent Activities Regarding 9-Cell TESLA-Type Cavities at KEK”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 792. doi:10.18429/JACoW-SRF2021-THPCAV006
[n]	F.-J. Decker, W. S. Colocho, M.-H. Wang, Y. T. Yan, and G. Yocky, “Constants and Pseudo-constants of Coupled Beam Motion in the PEP-II Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC008, pp. 2990-2992. 
[n]	H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2048-2051. 
[n]	A. Galimberti et al., “Improvements on the Photon Beam Diagnostics at ELETTRA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI109, pp. 1891-1893. 
[n]	L. Aldea, J. Reich, and P. Wucherer, “The Modified Center Region for the Project ISIS at JULIC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-23, pp. 461-463. 
[n]	A. Halavanau, et al., “Generation of Homogeneous and Patterned Electron Beams using a Microlens Array Laser-Shaping Technique”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. XX-XX. doi:10.18429/JACoW-IPAC2016-THPOW021

For LaTeX

Use Complete Form

For BibTeX

References

Back to search