Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Amano, T. Hori, and T. Takayama, “Beam Measurements of Compact SR Ring AURORA-2S""”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A14, pp. 604-606.
[n] J. Watanabe et al., “Higher Order Mode (HOM) Damper of 500 MHz Damped Cavity for ASP Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH132, pp. 1325-1327.
[n] P. Bellomo et al., “SPEAR 3 DC Magnet Power Supplies - An Overview”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10004, pp. XX-XX.
[n] K. J. Doshi et al., “A Large Channel Count Multi Client Data Acquisition System for Superconducting Magnet System of SST-1”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD12, pp. 26-28.
[n] R. Cassel and H. Pfeffer, “The Power Supply System, Control, and Response of the NAL Main Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 860-864.
[n] C. Ekdahl et al., “DARHT-II Long-Pulse Beam-Dynamics Experiments”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB001, pp. 19-23.
[n] G. Olry et al., “Development of Spoke Cavities for the EURISOL and EUROTRANS Projects”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP38, pp. 328-330.
[n] H. Gassot, S. Blivet, T. Junquera, G. Olry, and E. Zaplatin, “Mechanical Studies of the Multi-Gap Spoke Cavity for European Project HIPPI”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP33, pp. 312-313.
[n] J. Spencer, S. Mao, and C. M. Spencer, “Further Experience with the SLC Permanent Magnetic (PM) Multipoles”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE019, pp. 779-781.
[n] S. Allison, P. Corredoura, W. Ross, R. Sass, and R. Tighe, “Experience with the PEP-II RF System at High Beam Currents”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A13, pp. 1891-1893.
[n] R. Erickson, C. W. Allen, S. Anderson, W. Linebarger, and M. Stanek, “SLAC Accelerator Operations Report: 1995-1997”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W014, pp. 596-598.
[n] J. P. Duke, D. J. S. Findlay, and G. R. Murdoch, “Design of a Gas Scattering Energy Analyser for the ISIS RFQ Accelerator Test Stand”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH115, pp. 2350-2352.
[n] M. Fouaidy et al., “Electromechanical, Thermal Properties and Radiation Hardness Tests of Piezoelectric Actuators at Low Temperature”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP60, pp. 608-610.
[n] S. C. Alverson, P. Bellomo, and K. J. Mattison, “SLAC Klystron Test Lab Bake Station Upgrade”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1393-1396. doi:10.18429/JACoW-ICALEPCS2017-THPHA024
[n] E. J-M. Voutier, “The PEPPo Concept for a Polarized Positron Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEOAB203, pp. 2088-2090.
[n] H. R. Lee et al., “Beam Parameter Optimization for UEM Facility with Photo-Emission S-band RF Gun”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3610-3612. doi:10.18429/JACoW-IPAC2018-THPAK154
[n] R. C. Gupta, M. Anerella, J. P. Cozzolino, A. K. Jain, J. F. Muratore, and P. Wanderer, “Iron Shims outside the Helium Vessel to Adjust Field Quality at High Fields”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2734-2736. doi:10.18429/JACoW-IPAC2014-WEPRI101
[n] L. Emery, G. I. Fystro, H. Shang, and M. L. Smith, “Beamline-Controlled Steering of Source-Point Angle at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 887-889. doi:10.18429/JACoW-NAPAC2016-WEPOB04
[n] P. A. Bystrov, Y. S. Pavlov, O. V. Souvorova, V. P. Filippovich, and N. V. Iluhina, “Effect of Ozone in Experiments on the Development of Food Irradiation Methods”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 240-242. doi:10.18429/JACoW-RUPAC2018-TUPSA46
[n] P. I. Gladkikh, I. M. Karnaukhov, S. Kononenko, A. A. Shcherbakov, and A. S. Tarasenko, “A Slow Half-Integer Resonance Beam Extraction in a Pulse Stretcher Ring PSR-2000”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1691-1693.
[n] R. Cassel, “A Multiple Flattop Control System for the Fermilab Main Accelerator Power Supplies”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1247-1249.
[n] F. C. Pilat et al., “Reduction of Beta* and Increase of Luminosity at RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP008, pp. 2495-2497.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Amano, T. Hori, and T. Takayama, “Beam Measurements of Compact SR Ring AURORA-2S""”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A14, pp. 604-606.
- J. Watanabe et al., “Higher Order Mode (HOM) Damper of 500 MHz Damped Cavity for ASP Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH132, pp. 1325-1327.
- P. Bellomo et al., “SPEAR 3 DC Magnet Power Supplies - An Overview”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10004, pp. XX-XX.
- K. J. Doshi et al., “A Large Channel Count Multi Client Data Acquisition System for Superconducting Magnet System of SST-1”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD12, pp. 26-28.
- R. Cassel and H. Pfeffer, “The Power Supply System, Control, and Response of the NAL Main Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 860-864.
- C. Ekdahl et al., “DARHT-II Long-Pulse Beam-Dynamics Experiments”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAB001, pp. 19-23.
- G. Olry et al., “Development of Spoke Cavities for the EURISOL and EUROTRANS Projects”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP38, pp. 328-330.
- H. Gassot, S. Blivet, T. Junquera, G. Olry, and E. Zaplatin, “Mechanical Studies of the Multi-Gap Spoke Cavity for European Project HIPPI”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP33, pp. 312-313.
- J. Spencer, S. Mao, and C. M. Spencer, “Further Experience with the SLC Permanent Magnetic (PM) Multipoles”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE019, pp. 779-781.
- S. Allison, P. Corredoura, W. Ross, R. Sass, and R. Tighe, “Experience with the PEP-II RF System at High Beam Currents”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A13, pp. 1891-1893.
- R. Erickson, C. W. Allen, S. Anderson, W. Linebarger, and M. Stanek, “SLAC Accelerator Operations Report: 1995-1997”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W014, pp. 596-598.
- J. P. Duke, D. J. S. Findlay, and G. R. Murdoch, “Design of a Gas Scattering Energy Analyser for the ISIS RFQ Accelerator Test Stand”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH115, pp. 2350-2352.
- M. Fouaidy et al., “Electromechanical, Thermal Properties and Radiation Hardness Tests of Piezoelectric Actuators at Low Temperature”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP60, pp. 608-610.
- S. C. Alverson, P. Bellomo, and K. J. Mattison, “SLAC Klystron Test Lab Bake Station Upgrade”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1393-1396.
- E. J-M. Voutier, “The PEPPo Concept for a Polarized Positron Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEOAB203, pp. 2088-2090.
- H. R. Lee et al., “Beam Parameter Optimization for UEM Facility with Photo-Emission S-band RF Gun”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3610-3612.
- R. C. Gupta, M. Anerella, J. P. Cozzolino, A. K. Jain, J. F. Muratore, and P. Wanderer, “Iron Shims outside the Helium Vessel to Adjust Field Quality at High Fields”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2734-2736.
- L. Emery, G. I. Fystro, H. Shang, and M. L. Smith, “Beamline-Controlled Steering of Source-Point Angle at the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 887-889.
- P. A. Bystrov, Y. S. Pavlov, O. V. Souvorova, V. P. Filippovich, and N. V. Iluhina, “Effect of Ozone in Experiments on the Development of Food Irradiation Methods”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 240-242.
- P. I. Gladkikh, I. M. Karnaukhov, S. Kononenko, A. A. Shcherbakov, and A. S. Tarasenko, “A Slow Half-Integer Resonance Beam Extraction in a Pulse Stretcher Ring PSR-2000”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1691-1693.
- R. Cassel, “A Multiple Flattop Control System for the Fermilab Main Accelerator Power Supplies”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1247-1249.
- F. C. Pilat et al., “Reduction of Beta* and Increase of Luminosity at RHIC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP008, pp. 2495-2497.
Back to search