Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Bradley, J. D. Crnkovic, B. E. Drendel, D. Stratakis, and N. S. Froemming, “Application of Quad-Scan Measurement Techniques to Muon Beams in the Muon g-2 Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1852-1855. doi:10.18429/JACoW-IPAC2018-WEPAF016
[n] L. J. Nevay et al., “Development of a Photonic Crystal Fibre Laser Amplifier for Particle Beam Diagnostics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP098, pp. 3681-3683.
[n] M. A. C. Cummings, R. P. Johnson, and T. J. Roberts, “GEM*STAR Accelerator-Driven Subcritical System for Improved Safety, Waste Management, and Plutonium Disposition”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1998-2000. doi:10.18429/JACoW-IPAC2016-TUPOY043
[n] E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3415-3417. doi:10.18429/JACoW-IPAC2017-WEPVA064
[n] P. Greninger, “Next Nearest Coupling from Analytical Expressions for the APT Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP88, pp. 878-880.
[n] S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 82-85. doi:10.18429/JACoW-ICALEPCS2015-MOM308
[n] P. Craievich, M. Petronio, and R. Vescovo, “Deflecting Mode Optimization for a High Energy Beam Diagnostic Tool”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP063, pp. 4096-4098.
[n] G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX.
[n] L. Faillace, R. B. Agustsson, P. Frigola, and A. Verma, “Status of the FERMI II RF Gun at Sincrotrone Trieste”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP116, pp. 692-694.
[n] B. Piosczyk, J. Halbritter, P. Kneisel, and O. Stoltz, “Investigations of Additional Losses in Superconducting Niobium Cavities Due to Frozen-In Flux”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 108-113.
[n] A. M. Baldwin et al., “Heavy Ion Accelerator Facility”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4294-4296.
[n] B. Piosczyk, “Preaccelerator Design and Component Development for the SNQ Linear Accelerator”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B04, pp. 43-45.
[n] T. Sen et al., “Expected Results From Channeling Radiation Experiments at Fast”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1873-1876. doi:10.18429/JACoW-IPAC2016-TUPOW049
[n] J. Welch and Z. Xu, “Low Loss Parameter for New CESR Electrostatic Separators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1851-1854.
[n] S. V. Kutsaev et al., “Design, Simulations and Experimental Demonstration of an Intra-Pulse Ramped-Energy Travelling Wave Linac for Cargo Inspection”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 421-424. doi:10.18429/JACoW-NAPAC2016-TUPOA68
[n] B. N. Kosciuk, A. Blednykh, and S. Seletskiy, “Construction and Operational Performance of a Horizontally Adjustable Beam Profile Monitor at NSLS-II”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF07, pp. 55-58.
[n] J. C. Chang, J. R. Chen, Y. C. Chung, C. Y. Liu, and Z. D. Tsai, “De-Ionized Cooling Water System Study and Improvement at TLS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG024, pp. 1479-1481.
[n] J. Hyun et al., “Commissioning and First Results From a Channeling-Radiation Experiment at FAST”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 428-431. doi:10.18429/JACoW-NAPAC2016-TUPOA73
[n] H. P. Bohlen, E. Davies, P. Krzeminski, Y. Li, and R. N. Tornoe, “Inductive Output Tubes for Particle Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF075, pp. 1111-1113.
[n] P. A. Seidl et al., “Recent Experiments at NDCX-II: Irradiation of Materials Using Short, Intense Ion Beams”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 755-757. doi:10.18429/JACoW-NAPAC2016-WEPOA29
[n] P. D. Smith, “CCT: A Code to Automate the Design of Coupled Cavities”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB14, pp. 827-829.
[n] M. Busch et al., “Further Tests on the SC 325 MHz CH-cavity and Power Coupler Test Setup”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 437-439. doi:10.18429/JACoW-SRF2017-TUPB023
[n] R. G. Heine and F. Fichtner, “The MESA 15 kW cw 1.3 GHz Solid State Power Amplifier Prototype”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4216-4218. doi:10.18429/JACoW-IPAC2018-THPMF063
[n] S. Brooks, “Non-scaling fixed-field proton accelerator with constant tunes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2257-2260. doi:10.18429/JACoW-IPAC2023-TUPM031
[n] H. Tsutsui et al., “Design Study of a Superconducting AVF Cyclotron for Proton Therapy”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO3PB02, pp. 102-104.
[n] E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE120, pp. 2337-2339.
[n] S. Ferry and E. Karantzoulis, “The FERMI@elettra Beam Dump”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP042, pp. 2887-2889.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Bradley, J. D. Crnkovic, B. E. Drendel, D. Stratakis, and N. S. Froemming, “Application of Quad-Scan Measurement Techniques to Muon Beams in the Muon g-2 Experiment”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1852-1855.
- L. J. Nevay et al., “Development of a Photonic Crystal Fibre Laser Amplifier for Particle Beam Diagnostics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP098, pp. 3681-3683.
- M. A. C. Cummings, R. P. Johnson, and T. J. Roberts, “GEM*STAR Accelerator-Driven Subcritical System for Improved Safety, Waste Management, and Plutonium Disposition”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1998-2000.
- E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3415-3417.
- P. Greninger, “Next Nearest Coupling from Analytical Expressions for the APT Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP88, pp. 878-880.
- S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 82-85.
- P. Craievich, M. Petronio, and R. Vescovo, “Deflecting Mode Optimization for a High Energy Beam Diagnostic Tool”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP063, pp. 4096-4098.
- G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX.
- L. Faillace, R. B. Agustsson, P. Frigola, and A. Verma, “Status of the FERMI II RF Gun at Sincrotrone Trieste”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP116, pp. 692-694.
- B. Piosczyk, J. Halbritter, P. Kneisel, and O. Stoltz, “Investigations of Additional Losses in Superconducting Niobium Cavities Due to Frozen-In Flux”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 108-113.
- A. M. Baldwin et al., “Heavy Ion Accelerator Facility”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4294-4296.
- B. Piosczyk, “Preaccelerator Design and Component Development for the SNQ Linear Accelerator”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B04, pp. 43-45.
- T. Sen et al., “Expected Results From Channeling Radiation Experiments at Fast”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1873-1876.
- J. Welch and Z. Xu, “Low Loss Parameter for New CESR Electrostatic Separators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1851-1854.
- S. V. Kutsaev et al., “Design, Simulations and Experimental Demonstration of an Intra-Pulse Ramped-Energy Travelling Wave Linac for Cargo Inspection”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 421-424.
- B. N. Kosciuk, A. Blednykh, and S. Seletskiy, “Construction and Operational Performance of a Horizontally Adjustable Beam Profile Monitor at NSLS-II”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF07, pp. 55-58.
- J. C. Chang, J. R. Chen, Y. C. Chung, C. Y. Liu, and Z. D. Tsai, “De-Ionized Cooling Water System Study and Improvement at TLS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG024, pp. 1479-1481.
- J. Hyun et al., “Commissioning and First Results From a Channeling-Radiation Experiment at FAST”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 428-431.
- H. P. Bohlen, E. Davies, P. Krzeminski, Y. Li, and R. N. Tornoe, “Inductive Output Tubes for Particle Accelerators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF075, pp. 1111-1113.
- P. A. Seidl et al., “Recent Experiments at NDCX-II: Irradiation of Materials Using Short, Intense Ion Beams”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 755-757.
- P. D. Smith, “CCT: A Code to Automate the Design of Coupled Cavities”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THB14, pp. 827-829.
- M. Busch et al., “Further Tests on the SC 325 MHz CH-cavity and Power Coupler Test Setup”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 437-439.
- R. G. Heine and F. Fichtner, “The MESA 15 kW cw 1.3 GHz Solid State Power Amplifier Prototype”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4216-4218.
- S. Brooks, “Non-scaling fixed-field proton accelerator with constant tunes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM031, pp. 2257-2260.
- H. Tsutsui et al., “Design Study of a Superconducting AVF Cyclotron for Proton Therapy”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MO3PB02, pp. 102-104.
- E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE120, pp. 2337-2339.
- S. Ferry and E. Karantzoulis, “The FERMI@elettra Beam Dump”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP042, pp. 2887-2889.
Back to search