Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] N. Aftab et al., “4D Transverse Phase Space characterization of high brightness electron beams at PITZ”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4605-4608. doi:10.18429/JACoW-IPAC2023-THPL074
[n] L. Tchelidze and A. Jansson, “Overview of ESS Beam Loss Monitoring System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC131, pp. 1329-1331.
[n] K. Saito, F. Furuta, and H. Umezawa, “Multi-wire Slicing of Large Grain Ingot Material”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOAAU05, pp. 467-472.
[n] H. J. Zheng, F. Meng, and J. Y. Zhai, “HOM Coupler Design for CEPC Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 115-119. doi:10.18429/JACoW-SRF2017-MOPB028
[n] K. Ohmi and H. Koiso, “Dynamic Aperture Limit caused by IR Nonlinearity in Extremely Low-beta B Factories”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB015, pp. 1548-1550.
[n] R. Kitamura et al., “Beam profile measurement using the highly-oriented pyrolytic graphite”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4743-4745. doi:10.18429/JACoW-IPAC2023-THPL117
[n] K. Hatanaka et al., “Development Of The Rcnp Cyclotron Cascade”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 125-127.
[n] S. R. Abbott, M. A. Leitner, C. M. Lyneis, C. E. Taylor, and D. C. Wutte, “Status of the Superconducting ECR Ion Source VENUS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A01, pp. 1610-1612.
[n] Y. Luo et al., “Development and progress of the high-power solid-state amplifiers for HEPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3599-3601. doi:10.18429/JACoW-IPAC2023-WEPM014
[n] F. M?®ot and N. Monseu, “Lattice Design and Study Tools Regarding the Super-B Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB001, pp. 1512-1514.
[n] A. Gotz et al., “The TANGO Controls Collaboration in 2015”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 585-588. doi:10.18429/JACoW-ICALEPCS2015-WEA3O01
[n] R. Amirikas, A. Bertolini, and W. Bialowons, “Vibration Stability Studies of a Superconducting Accelerating Module at Room Temperature”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN008, pp. 2062-2064.
[n] M. Frey, P. H?â, H. Klingbeil, D. Domont-Yankulova, K. Gross, and J. Harzheim, “Prototype Results of the ESR Barrier-Bucket System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4133-4135. doi:10.18429/JACoW-IPAC2017-THPIK015
[n] A. Brauch, M. Arnold, J. Enders, L. E. Jürgensen, N. Pietralla, and S. Weih, “Bunch Length Measurement Systems at S-DALINAC”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 96-99. doi:10.18429/JACoW-IBIC2022-MOP26
[n] M. Ono et al., “Achievement of 40 MV/m Accelerating Field in L- Band SCC at KEK”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C08, pp. 472-484.
[n] P. Kneisel, G. Ciovati, K. Davis, K. Macha, and J. Mammosser, “Superconducting Prototype Cavities for the Spallation Neutron Source (SNS) Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO015, pp. 2247-2249.
[n] King-Yuen Ng, “Space-Charge Effects of Transition Crossing in the Fermilab Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1129-1132.
[n] F. Schlie?ƒmann, M. Arnold, M. Dutine, J. Pforr, N. Pietralla, and M. Steinhorst, “Beam Dynamics Simulations for the Twofold ERL Mode at the S-DALINAC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 155-158. doi:10.18429/JACoW-ERL2019-FRCOXBS03
[n] G. Nicholls, X. Pei, R. Poirier, and J. Redding, “RF System for the Indiana University Cyclotron Facility Cooler Project”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1872-1875.
[n] M. Kinsho, “Status and Progress of the J-PARC 3-GeV RCS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC069, pp. 627-629.
[n] D. B. Bazyl, H. De Gersem, J. Enders, W. F. O. M??ller, and S. Weih, “Design of a Multi-Cell SRF Reduced-Beta Cavity for the Acceleration of Low Energy Electron Beams”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 603-605. doi:10.18429/JACoW-FEL2019-THP008
[n] C. Kaya et al., “Beam Diagnostics E-GUN Test Stand at TARLA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 704-706. doi:10.18429/JACoW-IPAC2014-MOPRI045
[n] G. LeBlanc, “The Australian Synchrotron Accelerator Physics Program”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA001, pp. 2466-2468.
[n] K. Suda et al., “Fabrication and Performance of Superconducting Quarter-Wavelength Resonators for SRILAC”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 182-187. doi:10.18429/JACoW-SRF2019-MOP055
[n] E. Zaidman, D. C. Barnes, K. Mima, D. Neuffer, T. Ohsuga, and T. Tajima, “Study of the Plasma Fiber Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3545-3548.
[n] A. Goto et al., “Construction of a New Pre-Injector System for the RILAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-09, pp. 202-205.
[n] M. R. P. Walive Pathiranage and A. V. Gurevich, “Nonlinear Dynamics and Dissipation of Vortex Lines Driven by Strong RF Fields”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 560-564. doi:10.18429/JACoW-SRF2019-TUP055
[n] T. Tanaka et al., “Burst Pulse Superimposed Electron Beam Acceleration in LEBRA FEL Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC142, pp. 3218-3220.
[n] T. M. Huang et al., “Design Optimization of the 166-MHz and 500-MHz Fundamental Power Couplers for Superconducting RF Cavities at High Energy Photon Source”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 544. doi:10.18429/JACoW-SRF2021-WEPFAV005
[n] T. Higo, K. Takata, T. Taniuchi, and M. Yamamoto, “High Gradient Experiment for X-Band Travelling Wave Structure”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-37, pp. 145-147.
[n] G. Zschornack, F. Grossmann, V. P. Ovsyannikov, and E. Griesmayer, “Dresden Ebis-Sc ÔÇô A New Generation Of Powerful Ion Sources For The Medical Particle Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 298-299.
[n] E. Bayer, P. Zipf, A. Klaus, H. Klingbeil, and G. Schreiber, “Fast FPGA Based Low-Trigger-Jitter Waveform Generator Method for Barrier-Bucket Electronics at FAIR”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA01, pp. 1352-1354.
[n] T. Saeki et al., “The First Measurement of Low-loss 9-cell Cavity in a Cryomodule at STF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP029, pp. 610-612.
[n] D. Dong, “Novel Conception of Beam Temperature in Accelerator and Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH160, pp. 1400-1401.
[n] A. A. Aksoy et al., “Design Parameters and Current Status of the TARLA Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2918-2920. doi:10.18429/JACoW-IPAC2014-THPRO026
[n] G. V. Dolbilov et al., “Design of 135 MW X-Band Relativistic Klystron for Linear Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P023, pp. 3126-3128.
[n] G. Ganetis and A. Prodell, “Results from Heater-Induced Quenches of a 4.5m Two-in-One Superconducting R&D Dipole for the SSC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3678-3681.
[n] K. Kittimanapun, Ch. Dhammatong, N. Juntong, W. Phacheerak, and M. Phanak, “Development of a Pre-Injector Test Bench for Future SLRI Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4499-4501. doi:10.18429/JACoW-IPAC2018-THPMK085
[n] Y. Nosochkov, P. Emma, T. O. Raubenheimer, and M. Woodley, “Design of the LCLS-II Electron Optics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2940-2942. doi:10.18429/JACoW-IPAC2014-THPRO034
[n] M. Ikegami et al., “High Intensity Aspects of J-PARC Linac Including Re-commissioning after Earthquake”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3A01, pp. 497-501.
[n] E. B. Blum et al., “NSLS-II Injector Commissioning and Initial Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1944-1946. doi:10.18429/JACoW-IPAC2015-TUPMA050
[n] H. Klingbeil et al., “Status of the SIS100 RF Systems”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4136-4138. doi:10.18429/JACoW-IPAC2017-THPIK016
For LaTeX
Use Complete Form
For BibTeX
References
- N. Aftab et al., “4D Transverse Phase Space characterization of high brightness electron beams at PITZ”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL074, pp. 4605-4608.
- L. Tchelidze and A. Jansson, “Overview of ESS Beam Loss Monitoring System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC131, pp. 1329-1331.
- K. Saito, F. Furuta, and H. Umezawa, “Multi-wire Slicing of Large Grain Ingot Material”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THOAAU05, pp. 467-472.
- H. J. Zheng, F. Meng, and J. Y. Zhai, “HOM Coupler Design for CEPC Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 115-119.
- K. Ohmi and H. Koiso, “Dynamic Aperture Limit caused by IR Nonlinearity in Extremely Low-beta B Factories”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB015, pp. 1548-1550.
- R. Kitamura et al., “Beam profile measurement using the highly-oriented pyrolytic graphite”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL117, pp. 4743-4745.
- K. Hatanaka et al., “Development Of The Rcnp Cyclotron Cascade”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 125-127.
- S. R. Abbott, M. A. Leitner, C. M. Lyneis, C. E. Taylor, and D. C. Wutte, “Status of the Superconducting ECR Ion Source VENUS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6A01, pp. 1610-1612.
- Y. Luo et al., “Development and progress of the high-power solid-state amplifiers for HEPS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM014, pp. 3599-3601.
- F. M?®ot and N. Monseu, “Lattice Design and Study Tools Regarding the Super-B Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB001, pp. 1512-1514.
- A. Gotz et al., “The TANGO Controls Collaboration in 2015”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 585-588.
- R. Amirikas, A. Bertolini, and W. Bialowons, “Vibration Stability Studies of a Superconducting Accelerating Module at Room Temperature”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN008, pp. 2062-2064.
- M. Frey, P. H?â, H. Klingbeil, D. Domont-Yankulova, K. Gross, and J. Harzheim, “Prototype Results of the ESR Barrier-Bucket System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4133-4135.
- A. Brauch, M. Arnold, J. Enders, L. E. Jürgensen, N. Pietralla, and S. Weih, “Bunch Length Measurement Systems at S-DALINAC”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 96-99.
- M. Ono et al., “Achievement of 40 MV/m Accelerating Field in L- Band SCC at KEK”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C08, pp. 472-484.
- P. Kneisel, G. Ciovati, K. Davis, K. Macha, and J. Mammosser, “Superconducting Prototype Cavities for the Spallation Neutron Source (SNS) Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO015, pp. 2247-2249.
- King-Yuen Ng, “Space-Charge Effects of Transition Crossing in the Fermilab Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1129-1132.
- F. Schlie?ƒmann, M. Arnold, M. Dutine, J. Pforr, N. Pietralla, and M. Steinhorst, “Beam Dynamics Simulations for the Twofold ERL Mode at the S-DALINAC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 155-158.
- G. Nicholls, X. Pei, R. Poirier, and J. Redding, “RF System for the Indiana University Cyclotron Facility Cooler Project”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1872-1875.
- M. Kinsho, “Status and Progress of the J-PARC 3-GeV RCS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC069, pp. 627-629.
- D. B. Bazyl, H. De Gersem, J. Enders, W. F. O. M??ller, and S. Weih, “Design of a Multi-Cell SRF Reduced-Beta Cavity for the Acceleration of Low Energy Electron Beams”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 603-605.
- C. Kaya et al., “Beam Diagnostics E-GUN Test Stand at TARLA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 704-706.
- G. LeBlanc, “The Australian Synchrotron Accelerator Physics Program”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA001, pp. 2466-2468.
- K. Suda et al., “Fabrication and Performance of Superconducting Quarter-Wavelength Resonators for SRILAC”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 182-187.
- E. Zaidman, D. C. Barnes, K. Mima, D. Neuffer, T. Ohsuga, and T. Tajima, “Study of the Plasma Fiber Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3545-3548.
- A. Goto et al., “Construction of a New Pre-Injector System for the RILAC”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-09, pp. 202-205.
- M. R. P. Walive Pathiranage and A. V. Gurevich, “Nonlinear Dynamics and Dissipation of Vortex Lines Driven by Strong RF Fields”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 560-564.
- T. Tanaka et al., “Burst Pulse Superimposed Electron Beam Acceleration in LEBRA FEL Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC142, pp. 3218-3220.
- T. M. Huang et al., “Design Optimization of the 166-MHz and 500-MHz Fundamental Power Couplers for Superconducting RF Cavities at High Energy Photon Source”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 544.
- T. Higo, K. Takata, T. Taniuchi, and M. Yamamoto, “High Gradient Experiment for X-Band Travelling Wave Structure”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-37, pp. 145-147.
- G. Zschornack, F. Grossmann, V. P. Ovsyannikov, and E. Griesmayer, “Dresden Ebis-Sc ÔÇô A New Generation Of Powerful Ion Sources For The Medical Particle Therapy”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 298-299.
- E. Bayer, P. Zipf, A. Klaus, H. Klingbeil, and G. Schreiber, “Fast FPGA Based Low-Trigger-Jitter Waveform Generator Method for Barrier-Bucket Electronics at FAIR”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA01, pp. 1352-1354.
- T. Saeki et al., “The First Measurement of Low-loss 9-cell Cavity in a Cryomodule at STF”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP029, pp. 610-612.
- D. Dong, “Novel Conception of Beam Temperature in Accelerator and Applications”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH160, pp. 1400-1401.
- A. A. Aksoy et al., “Design Parameters and Current Status of the TARLA Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2918-2920.
- G. V. Dolbilov et al., “Design of 135 MW X-Band Relativistic Klystron for Linear Collider”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P023, pp. 3126-3128.
- G. Ganetis and A. Prodell, “Results from Heater-Induced Quenches of a 4.5m Two-in-One Superconducting R&D Dipole for the SSC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3678-3681.
- K. Kittimanapun, Ch. Dhammatong, N. Juntong, W. Phacheerak, and M. Phanak, “Development of a Pre-Injector Test Bench for Future SLRI Light Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4499-4501.
- Y. Nosochkov, P. Emma, T. O. Raubenheimer, and M. Woodley, “Design of the LCLS-II Electron Optics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2940-2942.
- M. Ikegami et al., “High Intensity Aspects of J-PARC Linac Including Re-commissioning after Earthquake”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3A01, pp. 497-501.
- E. B. Blum et al., “NSLS-II Injector Commissioning and Initial Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1944-1946.
- H. Klingbeil et al., “Status of the SIS100 RF Systems”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4136-4138.
Back to search