Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Arzumanov, A. Borisenko, and S. Lysukhin, “Energy Calibration and Energy Spread Measurements of the 1 MV Tandem Accelerator at Alma-Ata”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 495-498.
[n] A. P. Lee, M. C. Chou, H. P. Hsueh, J.-Y. Hwang, W. K. Lau, and P. Wang, “The High Brightness Photo-injector for THz CUR/VUV FEL at NSRRC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1125-1127. doi:10.18429/JACoW-IPAC2019-MOPTS105
[n] C. Montag and B. Parker, “Design of the 2015 Erhic Ring-Ring Interaction Region”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3129-3131. doi:10.18429/JACoW-IPAC2016-WEPOY058
[n] J. A. Fasolo, G. J. Marmer, and J. S. Moenich, “Design and Performance Characteristics of the Zero Gradient Synchrotron (ZGS) H - Ion Source and Related Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 94-97.
[n] M. Awschalom, L. Grumboski, A. F. Hrejsa, G. M. Lee, and I. Rosenberg, “The Fermilab Cancer Therapy Facility: Status Report After 2.5 Years of Operation”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3068-3071.
[n] J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
[n] A. J. Dobbs, D. Adey, and L. Coney, “MICE Muon Beamline Particle Rate and Related Beam Loss in the ISIS Synchrotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ035, pp. 874-876.
[n] E. Haas et al., “Engineering Design of the XPD & PDF Beamline Sample Environment for Safe Experimental Use of Hazardous Gases”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 379-381. doi:10.18429/JACoW-MEDSI2018-THPH19
[n] R. B. Nussbaumer et al., “ARIEL Control System at TRIUMF - Status Update”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 460-463. doi:10.18429/JACoW-ICALEPCS2015-MOPGF160
[n] M. A. Pop and S. Werin, “Considerations on Implementing EEHG with a Strong Linear Chirp”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1830-1832. doi:10.18429/JACoW-IPAC2019-TUPRB071
[n] U. Bartz and A. Schempp, “A CW RFQ Prototype”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP279, pp. 1352-1354.
[n] G. Stanford et al., “Mechanical Design, Construction and Alignment of the ISAC RFQ Accelerator at TRIUMF”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4094, pp. 980-982.
[n] X. P. Ding et al., “Influence of Proton Beam Emittances on Particle Production off a Muon Collider Target”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI069, pp. 1511-1513.
[n] Y. T. Ding et al., “Femtosecond Electron Beam and X-ray Beams at the Linac Coherent Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA086, pp. 1316-1318.
[n] E. D. Hudson, R. S. Lord, and W. H. White Jr, “Operating Characteristics of the ORIC Beam Extraction System”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-008, pp. XX-XX.
[n] P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2794-2797. doi:10.18429/JACoW-IPAC2019-WEPRB001
[n] R. Galiana, D. Manglunki, and C. Mazeline, “A Carbon Jet Beam Profile Monitor for LEAR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1198-1201.
[n] C. Roose, C. Boehme, I. Dolenc Kittelmann, A. Jansson, C. A. Thomas, and A. K?ñllberg, “Development of Non-invasive Transverse Profile Monitors for the ESS Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3656-3658. doi:10.18429/JACoW-IPAC2014-THPME167
[n] J.-C. Chang et al., “Power Saving Status at NSSRC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3173-3175. doi:10.18429/JACoW-IPAC2015-WEPHA028
[n] M. Volpi et al., “High Power and High Repetition Rate X-band Power Source Using Multiple Klystrons”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4552-4555. doi:10.18429/JACoW-IPAC2018-THPMK104
[n] M. A. D. Wilson, “CW Racetrack Microtrons”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 71-76.
[n] A. Bardi et al., “The CDF-II Online Silicon Vertex Tracker”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THBT003, pp. XX-XX.
[n] D. Einfeld, F. Perez, S. Voigt, and M. Humpert, “Interlock and Control for the RF system of the ANKA Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP62, pp. 806-808.
[n] G. Geschonke, “Results from the CLIC Test Facility CTF3 and Update on the CLIC Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THYG02, pp. 2912-2916.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Arzumanov, A. Borisenko, and S. Lysukhin, “Energy Calibration and Energy Spread Measurements of the 1 MV Tandem Accelerator at Alma-Ata”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 495-498.
- A. P. Lee, M. C. Chou, H. P. Hsueh, J.-Y. Hwang, W. K. Lau, and P. Wang, “The High Brightness Photo-injector for THz CUR/VUV FEL at NSRRC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1125-1127.
- C. Montag and B. Parker, “Design of the 2015 Erhic Ring-Ring Interaction Region”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3129-3131.
- J. A. Fasolo, G. J. Marmer, and J. S. Moenich, “Design and Performance Characteristics of the Zero Gradient Synchrotron (ZGS) H - Ion Source and Related Systems”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 94-97.
- M. Awschalom, L. Grumboski, A. F. Hrejsa, G. M. Lee, and I. Rosenberg, “The Fermilab Cancer Therapy Facility: Status Report After 2.5 Years of Operation”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3068-3071.
- J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
- A. J. Dobbs, D. Adey, and L. Coney, “MICE Muon Beamline Particle Rate and Related Beam Loss in the ISIS Synchrotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ035, pp. 874-876.
- E. Haas et al., “Engineering Design of the XPD & PDF Beamline Sample Environment for Safe Experimental Use of Hazardous Gases”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 379-381.
- R. B. Nussbaumer et al., “ARIEL Control System at TRIUMF - Status Update”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 460-463.
- M. A. Pop and S. Werin, “Considerations on Implementing EEHG with a Strong Linear Chirp”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1830-1832.
- U. Bartz and A. Schempp, “A CW RFQ Prototype”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP279, pp. 1352-1354.
- G. Stanford et al., “Mechanical Design, Construction and Alignment of the ISAC RFQ Accelerator at TRIUMF”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4094, pp. 980-982.
- X. P. Ding et al., “Influence of Proton Beam Emittances on Particle Production off a Muon Collider Target”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI069, pp. 1511-1513.
- Y. T. Ding et al., “Femtosecond Electron Beam and X-ray Beams at the Linac Coherent Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA086, pp. 1316-1318.
- E. D. Hudson, R. S. Lord, and W. H. White Jr, “Operating Characteristics of the ORIC Beam Extraction System”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-008, pp. XX-XX.
- P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2794-2797.
- R. Galiana, D. Manglunki, and C. Mazeline, “A Carbon Jet Beam Profile Monitor for LEAR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1198-1201.
- C. Roose, C. Boehme, I. Dolenc Kittelmann, A. Jansson, C. A. Thomas, and A. K?ñllberg, “Development of Non-invasive Transverse Profile Monitors for the ESS Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3656-3658.
- J.-C. Chang et al., “Power Saving Status at NSSRC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3173-3175.
- M. Volpi et al., “High Power and High Repetition Rate X-band Power Source Using Multiple Klystrons”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4552-4555.
- M. A. D. Wilson, “CW Racetrack Microtrons”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 71-76.
- A. Bardi et al., “The CDF-II Online Silicon Vertex Tracker”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THBT003, pp. XX-XX.
- D. Einfeld, F. Perez, S. Voigt, and M. Humpert, “Interlock and Control for the RF system of the ANKA Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP62, pp. 806-808.
- G. Geschonke, “Results from the CLIC Test Facility CTF3 and Update on the CLIC Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THYG02, pp. 2912-2916.
Back to search