Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. J. Wang et al., “Operation Performance of the White Circuit for the Booster Synchrotron in NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16047, pp. XX-XX.
[n] J. Bauche and A. V. Aloev, “Design of the Beam Transfer Line Magnets for HIE-ISOLDE”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1289-1291. doi:10.18429/JACoW-IPAC2014-TUPRO104
[n] J. Qiang et al., “Studies of Space Charge Effects in the Proposed CERN PS2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD020, pp. 1964-1966.
[n] R. Tiede, A. Almomani, M. Busch, F. D. Dziuba, and U. Ratzinger, “Improved Beam Dynamics and Cavity RF Design for the FAIR Proton Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 111-113. doi:10.18429/JACoW-LINAC2016-MOPRC018
[n] A. V. Zlobin et al., “STATUS OF 11 T 2-IN-1 Nb3Sn DIPOLE DEVELOPMENT FOR LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2722-2724. doi:10.18429/JACoW-IPAC2014-WEPRI097
[n] J. Xu, P. F. Fisher, M. Min, B. Mustapha, J. A. Nolen, and P. N. Ostroumov, “Developing Peta-Scalable Algorithms for Beam Dynamic Simulations”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUYMH03, pp. 1256-1260.
[n] E. Jauregi et al., “High Current Switch-mode Power Converter Prototype for LHC Project 6kA, 8V”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT048, pp. 656-658.
[n] A. Huschauer, S. S. Gilardoni, and R. Wasef, “Influence of the Alignment of the Main Magnets on Resonances in the CERN Proton Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 392-394. doi:10.18429/JACoW-IPAC2015-MOPJE046
[n] T. Maruta et al., “Status of Beam Commissioning in FRIB Driver Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 951-953. doi:10.18429/JACoW-NAPAC2019-THZBA3
[n] J. Borburgh, B. Balhan, E. H. R. Gaxiola, B. Goddard, Y. Kadi, and J. A. Uythoven, “The Design of the New Fast Extraction Channel for LHC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT009, pp. 548-550.
[n] M. Min, Y.-C. Chae, and P. F. Fisher, “Spectral-Element Discontinuous Galerkin Simulations for Wake Potential Calculations: NEKCEM”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN091, pp. 3435-3437.
[n] M. Ferrario et al., “Advanced Beam Dynamics Experiments with the SPARC High Brightness Photoinjector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE082, pp. 2311-2313.
[n] A. Noda et al., “Challenge for More Efficient Transverse Laser Cooling for Beam Crystallization”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD012, pp. 394-396.
[n] B. Autin et al., “The CERN Antiproton Collector Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 308-311.
[n] B. Sun, Z. Li, J. Y. Tang, and F. Yan, “Local Compensation-Rematch for Element Failures in the Low Energy Section of C-Ads Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA018, pp. 1760-1762.
[n] A. Ogata, K. Kan, T. Kondoh, K. Norizawa, J. Yang, and Y. Yoshida, “High-intensity Monochromatic Cherenkov Radiation in THz Range by Femtosecond Electron Bunches in Impurity-doped Semiconductor Tube”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP007, pp. 580-582.
[n] Y. Renier, P. Bambade, B. Bolzon, T. Okugi, A. Scarfe, and G. R. White, “Orbit Reconstruction, Correction, Stabilization and Monitoring in the ATF2 Extraction Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP004, pp. 4311-4313.
[n] E. Syresin et al., “Status of Accelerator Complex NICA”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 12-16. doi:10.18429/JACoW-RUPAC2018-MOXMH03
[n] A. Liu, A. D. Bross, and J.-B. Lagrange, “A FODO Beam Line Design for nuPIL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3375-3377. doi:10.18429/JACoW-IPAC2016-THPMB055
[n] G. R. White et al., “Plans and Progress towards Tuning the ATF2 Final Focus System to Obtain a 35nm IP Waist”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP021, pp. 4353-4355.
[n] K. L. Bane, H. Hayano, K. Kubo, T. Naito, T. Okugi, and J. Urakawa, “Intrabeam Scattering Analysis of ATF Beam Measurements”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH046, pp. 2955-2957.
[n] A. Liu, A. D. Bross, and D. V. Neuffer, “nuSTORM Horn Optimization Study”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1562-1564. doi:10.18429/JACoW-IPAC2014-TUPRI005
[n] A. E. Shevelev, I. S. Bordulev, A. E. Harisova, T. V. Selezneva, and Yu. N. Yurjev, “Combined Deposition Technique for Nb3Sn Coating Formation”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper TUPFDV009, pp..
[n] R. Pearsons, A. Harvey, E. Hubbard, M. Schulze, and S. Sheynin, “APT High Energy Linac Intertank Assembly Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA81, pp. 3579-3581.
[n] D. Pellegrini, A. Latina, D. Schulte, and S. A. Bogacz, “Single and Multi-bunch End-to-end Tracking in the LHeC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 459-461. doi:10.18429/JACoW-IPAC2015-MOPJE066
[n] N. Cutic and E. Mansten, “Emittance and Beta Functions Measurements for the MAX IV Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME070, pp. 640-642.
[n] A. A. Krasnov et al., “A Synchrotron Radiation Beamline Installed at BINP to Study the High Luminosity LHC Vacuum System”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 572-574. doi:10.18429/JACoW-RUPAC2016-THPSC017
[n] G. Lei, C. H. Wang, Z. Zhao, K. J. Yue, S. Huang, and J. Zhao, “Constructing a Distributed Developing Environment Using EPICS for BEPCII Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP524, pp. XX-XX.
[n] St. Sattler et al., “Manufacturing of the First of Series SIS100 Dipole Magnet”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOODB101, pp. 31-33.
[n] D. E. Anderson et al., “Design of a 1-MV Induction Injector for the Relativisitic Two-Beam Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W012, pp. 590-592.
[n] J. H. B. Madsen et al., “Status Report on the LEP Pre-Injector (LPI) and the Proton Synchrotron (PS) as A e e - Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 386-389.
[n] M. Min, Y.-C. Chae, Y. H. Chin, P. F. Fischer, and K.-J. Kim, “Fourier Spectral Simulation for Wake Field in Conducting Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN090, pp. 3432-3434.
[n] F. Caspers, M. Betz, A. Grudiev, and H. Sapotta, “Design Concepts for RF-DC Conversion in Particle Accelerator Systems”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD090, pp. 3308-3310.
[n] J.-B. Lagrange, J. Pasternak, R. B. Appleby, S. C. Tygier, A. D. Bross, and A. Liu, “FFAG Beam Line for nuPIL - Neutrinos from PIon Beam Line”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3372-3374. doi:10.18429/JACoW-IPAC2016-THPMB054
[n] K. Zhu et al., “Monoenergetic Beam Generated by Laser Accelerator at Peking University”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4702-4704. doi:10.18429/JACoW-IPAC2018-THPML024
For LaTeX
Use Complete Form
For BibTeX
References
- C. J. Wang et al., “Operation Performance of the White Circuit for the Booster Synchrotron in NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16047, pp. XX-XX.
- J. Bauche and A. V. Aloev, “Design of the Beam Transfer Line Magnets for HIE-ISOLDE”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1289-1291.
- J. Qiang et al., “Studies of Space Charge Effects in the Proposed CERN PS2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD020, pp. 1964-1966.
- R. Tiede, A. Almomani, M. Busch, F. D. Dziuba, and U. Ratzinger, “Improved Beam Dynamics and Cavity RF Design for the FAIR Proton Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 111-113.
- A. V. Zlobin et al., “STATUS OF 11 T 2-IN-1 Nb3Sn DIPOLE DEVELOPMENT FOR LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2722-2724.
- J. Xu, P. F. Fisher, M. Min, B. Mustapha, J. A. Nolen, and P. N. Ostroumov, “Developing Peta-Scalable Algorithms for Beam Dynamic Simulations”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUYMH03, pp. 1256-1260.
- E. Jauregi et al., “High Current Switch-mode Power Converter Prototype for LHC Project 6kA, 8V”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT048, pp. 656-658.
- A. Huschauer, S. S. Gilardoni, and R. Wasef, “Influence of the Alignment of the Main Magnets on Resonances in the CERN Proton Synchrotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 392-394.
- T. Maruta et al., “Status of Beam Commissioning in FRIB Driver Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 951-953.
- J. Borburgh, B. Balhan, E. H. R. Gaxiola, B. Goddard, Y. Kadi, and J. A. Uythoven, “The Design of the New Fast Extraction Channel for LHC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT009, pp. 548-550.
- M. Min, Y.-C. Chae, and P. F. Fisher, “Spectral-Element Discontinuous Galerkin Simulations for Wake Potential Calculations: NEKCEM”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN091, pp. 3435-3437.
- M. Ferrario et al., “Advanced Beam Dynamics Experiments with the SPARC High Brightness Photoinjector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE082, pp. 2311-2313.
- A. Noda et al., “Challenge for More Efficient Transverse Laser Cooling for Beam Crystallization”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD012, pp. 394-396.
- B. Autin et al., “The CERN Antiproton Collector Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 308-311.
- B. Sun, Z. Li, J. Y. Tang, and F. Yan, “Local Compensation-Rematch for Element Failures in the Low Energy Section of C-Ads Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA018, pp. 1760-1762.
- A. Ogata, K. Kan, T. Kondoh, K. Norizawa, J. Yang, and Y. Yoshida, “High-intensity Monochromatic Cherenkov Radiation in THz Range by Femtosecond Electron Bunches in Impurity-doped Semiconductor Tube”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP007, pp. 580-582.
- Y. Renier, P. Bambade, B. Bolzon, T. Okugi, A. Scarfe, and G. R. White, “Orbit Reconstruction, Correction, Stabilization and Monitoring in the ATF2 Extraction Line”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP004, pp. 4311-4313.
- E. Syresin et al., “Status of Accelerator Complex NICA”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 12-16.
- A. Liu, A. D. Bross, and J.-B. Lagrange, “A FODO Beam Line Design for nuPIL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3375-3377.
- G. R. White et al., “Plans and Progress towards Tuning the ATF2 Final Focus System to Obtain a 35nm IP Waist”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP021, pp. 4353-4355.
- K. L. Bane, H. Hayano, K. Kubo, T. Naito, T. Okugi, and J. Urakawa, “Intrabeam Scattering Analysis of ATF Beam Measurements”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH046, pp. 2955-2957.
- A. Liu, A. D. Bross, and D. V. Neuffer, “nuSTORM Horn Optimization Study”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1562-1564.
- A. E. Shevelev, I. S. Bordulev, A. E. Harisova, T. V. Selezneva, and Yu. N. Yurjev, “Combined Deposition Technique for Nb3Sn Coating Formation”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper TUPFDV009, pp..
- R. Pearsons, A. Harvey, E. Hubbard, M. Schulze, and S. Sheynin, “APT High Energy Linac Intertank Assembly Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA81, pp. 3579-3581.
- D. Pellegrini, A. Latina, D. Schulte, and S. A. Bogacz, “Single and Multi-bunch End-to-end Tracking in the LHeC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 459-461.
- N. Cutic and E. Mansten, “Emittance and Beta Functions Measurements for the MAX IV Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME070, pp. 640-642.
- A. A. Krasnov et al., “A Synchrotron Radiation Beamline Installed at BINP to Study the High Luminosity LHC Vacuum System”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 572-574.
- G. Lei, C. H. Wang, Z. Zhao, K. J. Yue, S. Huang, and J. Zhao, “Constructing a Distributed Developing Environment Using EPICS for BEPCII Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP524, pp. XX-XX.
- St. Sattler et al., “Manufacturing of the First of Series SIS100 Dipole Magnet”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOODB101, pp. 31-33.
- D. E. Anderson et al., “Design of a 1-MV Induction Injector for the Relativisitic Two-Beam Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W012, pp. 590-592.
- J. H. B. Madsen et al., “Status Report on the LEP Pre-Injector (LPI) and the Proton Synchrotron (PS) as A e e - Accelerator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 386-389.
- M. Min, Y.-C. Chae, Y. H. Chin, P. F. Fischer, and K.-J. Kim, “Fourier Spectral Simulation for Wake Field in Conducting Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN090, pp. 3432-3434.
- F. Caspers, M. Betz, A. Grudiev, and H. Sapotta, “Design Concepts for RF-DC Conversion in Particle Accelerator Systems”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD090, pp. 3308-3310.
- J.-B. Lagrange, J. Pasternak, R. B. Appleby, S. C. Tygier, A. D. Bross, and A. Liu, “FFAG Beam Line for nuPIL - Neutrinos from PIon Beam Line”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3372-3374.
- K. Zhu et al., “Monoenergetic Beam Generated by Laser Accelerator at Peking University”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4702-4704.
Back to search