Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Marks, J. Carrieri, C. Cork, W. V. Hassenzahl, E. Hoyer, and D. Plate, “ALS Insertion Device Block Measurement and Inspection”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2739-2742.
[n] D. L. Friesel, T. Ellison, W. P. Jones, and R. E. Pollock, “H- Beam Operation of the IUCF Stripper Loop”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2691-2694.
[n] Y. Sun et al., “Influence of environmental parameters on calibration drift in superconducting RF cavities”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 331-334. doi:10.18429/JACoW-LINAC2024-TUPB005
[n] B. Richter, “Invited Paper- The Next Generation of Accelerators”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4261-4266.
[n] L. T. Sun et al., “Highly Charged ECR Ion Source Development at IMP”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 82-88. doi:10.18429/JACoW-HIAT2018-TUZAA02
[n] Z. Y. Ma et al., “Recent Progress of Fundamental Power Couplers for the SHINE Project”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 827-830. doi:10.18429/JACoW-SRF2023-WEPWB102
[n] W. Ma et al., “Design and Simulation of a High Intensity Heavy Ion RFQ Accelerator Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 999-1001. doi:10.18429/JACoW-LINAC2016-THPLR064
[n] N. Hayashi et al., “Development of the Beam Diagnostics System for the J-PARC Rapid-Cycling Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAD003, pp. 299-301.
[n] R. Takai, T. Honda, T. Obina, H. Sagehashi, and M. Tadano, “Beam Diagnostics for New Beam Transport Line of PF-AR”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 112-116. doi:10.18429/JACoW-IBIC2017-MOPWC06
[n] L. Lu et al., “Research on an Accelerator-Based BNCT Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1024-1027. doi:10.18429/JACoW-IPAC2018-TUPAL010
[n] P. Ursch??tz et al., “Status of the SIEMENS Particle Therapy Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA005, pp. 70-72.
[n] R. Gupta, “Common Coil Magnet System for VLHC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP120, pp. 3239-3241.
[n] C. Monaghan and J. Michaud, “Characterisation of beam dynamics sensitivity to misalignments in the PERLE injector”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 165-168. doi:10.18429/JACoW-IPAC2025-MOPB049
[n] D. L. Friesel, T. Ellison, and W. P. Jones, “Electron Gun Design Study for the IUCF Beam Cooling System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2421-2424.
[n] C. Tenholt, G. Loisch, F. Stephan, and B. Marchetti, “High Gradient Pulsed Quadrupoles for Novel Accelerators and Space Charge Limited Beam Transport”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2505-2508. doi:10.18429/JACoW-IPAC2018-WEPMF061
[n] K. Shirasawa et al., “High Power Test of C-band Accelerating System for Japanese XFEL Project”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA105, pp. 470-472.
[n] A. Warner, D. Cathey, G. Cullen, J. Nelson, P. H. Kasper, and A. H. Lumpkin, “Development of the Electromagnetic Boom and MOP System (EMOP)”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 304-308. doi:10.18429/JACoW-IBIC2017-TULAB1
[n] R. H. Carcagno et al., “Control System Design for Automatic Cavity Tuning Machines”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP056, pp. 953-955.
[n] T. Ellison et al., “Electron Cooling and Accumulation of 200-MeV Protons at Fermilab”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2636-2639.
[n] G. K. Davis et al., “High Gradient Operation with the CEBAF Upgrade RF Control System”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP011, pp. 589-591.
[n] R. Helm and J. Irwin, “Final Focus Systems for Linear Colliders”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU1-02, pp. 258-262.
[n] P. S. Martin and D. Wildman, “Bunch Coalescing and Bunch Rotation in the Fermilab Main Ring: Operational Experience and Comparison with Simulations”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 785-788.
[n] K. M. Ha and J. Choi, “The Control System Upgrade for the PLS Storage Ring MPSs”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP575, pp. XX-XX.
[n] L. Lu et al., “Low Power Test and Tuning of the LEAF RFQ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1028-1031. doi:10.18429/JACoW-IPAC2018-TUPAL011
For LaTeX
Use Complete Form
For BibTeX
References
- S. Marks, J. Carrieri, C. Cork, W. V. Hassenzahl, E. Hoyer, and D. Plate, “ALS Insertion Device Block Measurement and Inspection”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2739-2742.
- D. L. Friesel, T. Ellison, W. P. Jones, and R. E. Pollock, “H- Beam Operation of the IUCF Stripper Loop”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2691-2694.
- Y. Sun et al., “Influence of environmental parameters on calibration drift in superconducting RF cavities”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 331-334.
- B. Richter, “Invited Paper- The Next Generation of Accelerators”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4261-4266.
- L. T. Sun et al., “Highly Charged ECR Ion Source Development at IMP”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 82-88.
- Z. Y. Ma et al., “Recent Progress of Fundamental Power Couplers for the SHINE Project”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB102, pp. 827-830.
- W. Ma et al., “Design and Simulation of a High Intensity Heavy Ion RFQ Accelerator Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 999-1001.
- N. Hayashi et al., “Development of the Beam Diagnostics System for the J-PARC Rapid-Cycling Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAD003, pp. 299-301.
- R. Takai, T. Honda, T. Obina, H. Sagehashi, and M. Tadano, “Beam Diagnostics for New Beam Transport Line of PF-AR”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 112-116.
- L. Lu et al., “Research on an Accelerator-Based BNCT Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1024-1027.
- P. Ursch??tz et al., “Status of the SIEMENS Particle Therapy Accelerators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA005, pp. 70-72.
- R. Gupta, “Common Coil Magnet System for VLHC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP120, pp. 3239-3241.
- C. Monaghan and J. Michaud, “Characterisation of beam dynamics sensitivity to misalignments in the PERLE injector”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB049, pp. 165-168.
- D. L. Friesel, T. Ellison, and W. P. Jones, “Electron Gun Design Study for the IUCF Beam Cooling System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2421-2424.
- C. Tenholt, G. Loisch, F. Stephan, and B. Marchetti, “High Gradient Pulsed Quadrupoles for Novel Accelerators and Space Charge Limited Beam Transport”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2505-2508.
- K. Shirasawa et al., “High Power Test of C-band Accelerating System for Japanese XFEL Project”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA105, pp. 470-472.
- A. Warner, D. Cathey, G. Cullen, J. Nelson, P. H. Kasper, and A. H. Lumpkin, “Development of the Electromagnetic Boom and MOP System (EMOP)”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 304-308.
- R. H. Carcagno et al., “Control System Design for Automatic Cavity Tuning Machines”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP056, pp. 953-955.
- T. Ellison et al., “Electron Cooling and Accumulation of 200-MeV Protons at Fermilab”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2636-2639.
- G. K. Davis et al., “High Gradient Operation with the CEBAF Upgrade RF Control System”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP011, pp. 589-591.
- R. Helm and J. Irwin, “Final Focus Systems for Linear Colliders”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU1-02, pp. 258-262.
- P. S. Martin and D. Wildman, “Bunch Coalescing and Bunch Rotation in the Fermilab Main Ring: Operational Experience and Comparison with Simulations”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 785-788.
- K. M. Ha and J. Choi, “The Control System Upgrade for the PLS Storage Ring MPSs”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP575, pp. XX-XX.
- L. Lu et al., “Low Power Test and Tuning of the LEAF RFQ”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1028-1031.
Back to search
