Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. E. Kim et al., “Status of PAL-XFEL Undulator Program”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2029-2031. doi:10.18429/JACoW-IPAC2014-WEPRO039
[n] D. Tronc, G. Meyrand, A. Setty, and D. T. Tran, “Electron Injector Designs for Light Source”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 487-490.
[n] V. Petrov et al., “NORMAL CONDUCTING SEPARATION DIPOLES FOR THE LHC BEAM CLEANING INSERTIONS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLP10, pp. XX-XX.
[n] S. Karabekyan, S. Abeghyan, J. Pflueger, and M. Yakopov, “Experience Gained during the Commissioning of the Undulator Control System at the European XFEL”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 148-150. doi:10.18429/JACoW-PCAPAC2016-FRITPLCO04
[n] D. T. Tran, A. Cailleaux, and G. Berthevas, “Computer-Aided Design of RF Structures”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0032, pp. 414-416.
[n] S. Karabekyan, A. Beckmann, J. Pflueger, N. Burandt, J. Kuhn, and A. Schoeps, “The Undulator Control System for the European XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR002, pp. 3966-3968.
[n] P. Dijkstal et al., “Corrugated wakefield structures at SwissFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4828-4831. doi:10.18429/JACoW-IPAC2023-THPL153
[n] V. A. Kvardakov et al., “A Project of the 2.5 GeV Booster-Synchrotron in BINP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE007, pp. 1039-1041.
[n] M. Schaer et al., “Study of a C-band Standing-wave Gun for the SwissFEL Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 698-700. doi:10.18429/JACoW-IPAC2014-MOPRI043
[n] R. Zennaro, M. Bopp, A. Citterio, R. Reiser, and T. Stapf, “C-band RF Pulse Compressor for SwissFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI059, pp. 2827-2829.
[n] R. W. Thomae, “Status of New Electron Cyclotron Resonance Ion Sources at iThemba LABS”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-04, pp. 68-71.
[n] R. W. Thomae, J. L. Conradie, D. T. Fourie, and D. Kuchler, “Beam Experiments with the Grenoble Test Electron Cyclotron Resonance Ion Source at iThemba LABS”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP14, pp. 68-70.
[n] K. E. Nichols, B. E. Carlsten, and A. Malyzhenkov, “Klynac Design Simulations and Experimental Setup”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 68-70. doi:10.18429/JACoW-LINAC2016-MOOP12
[n] Y. Fuwa, N. Amemiya, Y. Ishi, Y. Kuriyama, and T. Uesugi, “Design of Multi-MW Rapid Cycling Synchrotron for Accelerator Driven Transmutation System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1057-1059. doi:10.18429/JACoW-IPAC2018-TUPAL027
[n] R. W. Thomae et al., “The FOM-MEQALAC System: The RF Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0012, pp. 118-120.
[n] K. N. Sjobak, H. Burkhardt, R. De Maria, A. Mereghetti, and A. Santamar?¡a Garc?¡a, “General Functionality for Turn-Dependent Element Properties in SixTrack”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 468-471. doi:10.18429/JACoW-IPAC2015-MOPJE069
For LaTeX
Use Complete Form
For BibTeX
References
- D. E. Kim et al., “Status of PAL-XFEL Undulator Program”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2029-2031.
- D. Tronc, G. Meyrand, A. Setty, and D. T. Tran, “Electron Injector Designs for Light Source”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 487-490.
- V. Petrov et al., “NORMAL CONDUCTING SEPARATION DIPOLES FOR THE LHC BEAM CLEANING INSERTIONS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THLP10, pp. XX-XX.
- S. Karabekyan, S. Abeghyan, J. Pflueger, and M. Yakopov, “Experience Gained during the Commissioning of the Undulator Control System at the European XFEL”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 148-150.
- D. T. Tran, A. Cailleaux, and G. Berthevas, “Computer-Aided Design of RF Structures”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0032, pp. 414-416.
- S. Karabekyan, A. Beckmann, J. Pflueger, N. Burandt, J. Kuhn, and A. Schoeps, “The Undulator Control System for the European XFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR002, pp. 3966-3968.
- P. Dijkstal et al., “Corrugated wakefield structures at SwissFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL153, pp. 4828-4831.
- V. A. Kvardakov et al., “A Project of the 2.5 GeV Booster-Synchrotron in BINP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE007, pp. 1039-1041.
- M. Schaer et al., “Study of a C-band Standing-wave Gun for the SwissFEL Injector”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 698-700.
- R. Zennaro, M. Bopp, A. Citterio, R. Reiser, and T. Stapf, “C-band RF Pulse Compressor for SwissFEL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI059, pp. 2827-2829.
- R. W. Thomae, “Status of New Electron Cyclotron Resonance Ion Sources at iThemba LABS”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-04, pp. 68-71.
- R. W. Thomae, J. L. Conradie, D. T. Fourie, and D. Kuchler, “Beam Experiments with the Grenoble Test Electron Cyclotron Resonance Ion Source at iThemba LABS”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP14, pp. 68-70.
- K. E. Nichols, B. E. Carlsten, and A. Malyzhenkov, “Klynac Design Simulations and Experimental Setup”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 68-70.
- Y. Fuwa, N. Amemiya, Y. Ishi, Y. Kuriyama, and T. Uesugi, “Design of Multi-MW Rapid Cycling Synchrotron for Accelerator Driven Transmutation System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1057-1059.
- R. W. Thomae et al., “The FOM-MEQALAC System: The RF Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0012, pp. 118-120.
- K. N. Sjobak, H. Burkhardt, R. De Maria, A. Mereghetti, and A. Santamar?¡a Garc?¡a, “General Functionality for Turn-Dependent Element Properties in SixTrack”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 468-471.
Back to search