Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. M. Vetter and T. L. Buller, “Regenerative BBU Starting Currents in Standing Wave Cavities”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-57, pp. 769-771.
[n] B. Lindstrom et al., “Machine Protection Experience from Beam Tests with Crab Cavity Prototypes in the CERN SPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 520-523. doi:10.18429/JACoW-IPAC2019-MOPMP036
[n] L. Chapman, D. A. Finley, M. Harrison, and W. Merz, “Tevatron Extraction Microcomputer”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2144-2147.
[n] R. Jones and H. Schmickler Geneva, “The Measurement of Q' And Q'' in the CERN-SPS by Head-Tail Phase Shift Analysis”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT06, pp. XX-XX.
[n] J.-W. Kim et al., “Design Study of In-flight Fragment Separator for Rare Isotope Science Project in Korea”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOB02, pp. 20-22.
[n] P. N. Lu, A. Arnold, P. Murcek, J. Teichert, H. Vennekate, and R. Xiang, “Diagnostics of ELBE SRF Gun - Status and Future Design”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 53-56. doi:10.18429/JACoW-IBIC2017-MOPCC07
[n] C. Steier et al., “Shimming Correction of Dynamic Multipole Effects on Apple-II Type EPUs at the ALS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC130, pp. 2311-2313.
[n] N. Baboi et al., “Dipole modes study by means of HOM couplers at SBTF”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PT11, pp. XX-XX.
[n] N/A, “N/A”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOA03, pp. XX-XX.
[n] A. Goto et al., “The K2500 Superconducting Ring Cyclotron of Riken RI Beam Factory - Overview and Status”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-01, pp. 148-155.
[n] A. Takagi, Y. Irie, I. Sugai, and Y. Takeda, “Measurements of the Temperature on Carbon Stripper Foils by Pulsed 650keV H- Ion Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP055, pp. 1674-1676.
[n] C. J. Liaw, R. Schroeder, and R. Sikora, “Study of the RHIC BPM SMA Connector Failure Problem”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS095, pp. 649-651.
[n] J. C. Dooling and M. Borland, “Simulation and Measurement of Beam Loss in the Narrow-Gap Undulator Straight Section of the Advanced Photon Source Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB013, pp. 106-108.
[n] M. Bai et al., “Distributed coupling linac for efficient acceleration of high charge electron bunches”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2064-2066. doi:10.18429/JACoW-IPAC2023-TUPL141
[n] A. M. Vetter, C. M. Lyneis, and H. A. Schwettman, “Dependence of Multi-Pass Beam Breakup on Accelerator Parameters”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3757-3760.
[n] Z. S. Zhou, Y. L. Chi, and D. Y. He, “Design Studies on NSC KIPT Electron Gun System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI030, pp. 2768-2770.
[n] Y. Takeda et al., “Lifetime Measurement of HBC Stripper Foil using 3.2 MeV Ne+ for RCS of J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA056, pp. 202-204.
[n] A. V. Aleksandrov, “The SNS Beam Diagnostics Experience and Lessons Learned”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper MOIMNB02, pp. 30-33.
[n] G. Gnemmi, M. Paoluzzi, S. Energico, V. Desquiens, and C. Rossi, “A power amplifier based on rad-hard gallium nitride FETs for the 10 MHz cavities of the CERN proton synchrotron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1474-1477. doi:10.18429/JACoW-IPAC2024-TUPR25
[n] T. Toyama, K. Ohmi, and Y. Shobuda, “Study of Impedances and Instabilities in J-PARC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT078, pp. 1336-1338.
[n] D. Gamba et al., “ELENA Commissioning”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 626-631. doi:10.18429/JACoW-NAPAC2019-WEYBB1
[n] T. H. Luo, A. J. DeMello, A. R. Lambert, D. Li, S. Prestemon, and S. P. Virostek, “Progress on the MICE 201 MHz Cavities at LBNL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3378-3380. doi:10.18429/JACoW-IPAC2015-WEPTY046
[n] J. W. Flanagan et al., “Performance of Coded Aperture X-Ray Optics with Low Emittance Beam at CesrTA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP048, pp. 3561-3563.
[n] M. Hasegawa et al., “High Average Beam Current Acceleration at JNC High power Electron LINAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A01, pp. 815-817.
[n] F. Butin, “Successfully Managing the Experimental Area of a Large Physics Experiment, from Civil Engineering to the First Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB075, pp. 444-446.
[n] D. Herrup et al., “Real-Time Feedback Control of the Tevatron Tunes and Chromaticities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 898-901.
[n] M. Borland, J. C. Dooling, R. R. Lindberg, V. Sajaev, and A. Xiao, “Using Decoherence to Prevent Damage to the Swap-Out Dump for the APS Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1494-1497. doi:10.18429/JACoW-IPAC2018-TUPMK004
[n] M. Rossetti Conti and A. Bacci, “Beam Based Alignment Methods for Cavities and Solenoids in Photo-Injectors”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3247-3250. doi:10.18429/JACoW-IPAC2016-THPMB011
For LaTeX
Use Complete Form
For BibTeX
References
- A. M. Vetter and T. L. Buller, “Regenerative BBU Starting Currents in Standing Wave Cavities”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-57, pp. 769-771.
- B. Lindstrom et al., “Machine Protection Experience from Beam Tests with Crab Cavity Prototypes in the CERN SPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 520-523.
- L. Chapman, D. A. Finley, M. Harrison, and W. Merz, “Tevatron Extraction Microcomputer”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2144-2147.
- R. Jones and H. Schmickler Geneva, “The Measurement of Q' And Q'' in the CERN-SPS by Head-Tail Phase Shift Analysis”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT06, pp. XX-XX.
- J.-W. Kim et al., “Design Study of In-flight Fragment Separator for Rare Isotope Science Project in Korea”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper MOB02, pp. 20-22.
- P. N. Lu, A. Arnold, P. Murcek, J. Teichert, H. Vennekate, and R. Xiang, “Diagnostics of ELBE SRF Gun - Status and Future Design”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 53-56.
- C. Steier et al., “Shimming Correction of Dynamic Multipole Effects on Apple-II Type EPUs at the ALS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC130, pp. 2311-2313.
- N. Baboi et al., “Dipole modes study by means of HOM couplers at SBTF”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PT11, pp. XX-XX.
- N/A, “N/A”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper FRIOA03, pp. XX-XX.
- A. Goto et al., “The K2500 Superconducting Ring Cyclotron of Riken RI Beam Factory - Overview and Status”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-01, pp. 148-155.
- A. Takagi, Y. Irie, I. Sugai, and Y. Takeda, “Measurements of the Temperature on Carbon Stripper Foils by Pulsed 650keV H- Ion Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP055, pp. 1674-1676.
- C. J. Liaw, R. Schroeder, and R. Sikora, “Study of the RHIC BPM SMA Connector Failure Problem”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS095, pp. 649-651.
- J. C. Dooling and M. Borland, “Simulation and Measurement of Beam Loss in the Narrow-Gap Undulator Straight Section of the Advanced Photon Source Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOEPPB013, pp. 106-108.
- M. Bai et al., “Distributed coupling linac for efficient acceleration of high charge electron bunches”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL141, pp. 2064-2066.
- A. M. Vetter, C. M. Lyneis, and H. A. Schwettman, “Dependence of Multi-Pass Beam Breakup on Accelerator Parameters”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3757-3760.
- Z. S. Zhou, Y. L. Chi, and D. Y. He, “Design Studies on NSC KIPT Electron Gun System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI030, pp. 2768-2770.
- Y. Takeda et al., “Lifetime Measurement of HBC Stripper Foil using 3.2 MeV Ne+ for RCS of J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA056, pp. 202-204.
- A. V. Aleksandrov, “The SNS Beam Diagnostics Experience and Lessons Learned”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper MOIMNB02, pp. 30-33.
- G. Gnemmi, M. Paoluzzi, S. Energico, V. Desquiens, and C. Rossi, “A power amplifier based on rad-hard gallium nitride FETs for the 10 MHz cavities of the CERN proton synchrotron”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR25, pp. 1474-1477.
- T. Toyama, K. Ohmi, and Y. Shobuda, “Study of Impedances and Instabilities in J-PARC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT078, pp. 1336-1338.
- D. Gamba et al., “ELENA Commissioning”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 626-631.
- T. H. Luo, A. J. DeMello, A. R. Lambert, D. Li, S. Prestemon, and S. P. Virostek, “Progress on the MICE 201 MHz Cavities at LBNL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3378-3380.
- J. W. Flanagan et al., “Performance of Coded Aperture X-Ray Optics with Low Emittance Beam at CesrTA”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP048, pp. 3561-3563.
- M. Hasegawa et al., “High Average Beam Current Acceleration at JNC High power Electron LINAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A01, pp. 815-817.
- F. Butin, “Successfully Managing the Experimental Area of a Large Physics Experiment, from Civil Engineering to the First Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB075, pp. 444-446.
- D. Herrup et al., “Real-Time Feedback Control of the Tevatron Tunes and Chromaticities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 898-901.
- M. Borland, J. C. Dooling, R. R. Lindberg, V. Sajaev, and A. Xiao, “Using Decoherence to Prevent Damage to the Swap-Out Dump for the APS Upgrade”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1494-1497.
- M. Rossetti Conti and A. Bacci, “Beam Based Alignment Methods for Cavities and Solenoids in Photo-Injectors”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3247-3250.
Back to search