Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Lee et al., “Emittance Measurements at the PAL-XFEL Injector Test Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 690-693. doi:10.18429/JACoW-FEL2015-WEP058
[n] J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 280-282. doi:10.18429/JACoW-MEDSI2018-WEPH34
[n] R. R. Stevens, J. D. Schneider, and J. D. Sherman, “Injector Design for High-Current CW Proton Linacs”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3166-3169.
[n] H. Padamsee, J. Kirchgessner, J. Mioduszewski, R. Sundelin, and M. Tigner, “/sup> Colliding Beam Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3240-3242.
[n] Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714.
[n] M. Chung et al., “Longitudinal Electron Bunch Shaping Experiments at the PAL-ITF”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 694-697. doi:10.18429/JACoW-FEL2015-WEP060
[n] L. Cultrera et al., “Photocathode Growth and Characterization Advances at Cornell University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3990-3992. doi:10.18429/JACoW-IPAC2016-THPOW025
[n] C. Charrondière et al., “Labview-Based Template for Enhanced Accelerator Systems Control: Software Solutions for the CERN-ISOLDE Facilities”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 735-739. doi:10.18429/JACoW-ICALEPCS2023-TUPDP088
[n] J. Rosenzweig and E. Colby, “Charge and Wavelength Scaling of RF Photoinjectors: A Design Tool”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB05, pp. 957-960.
[n] A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2898-2901.
[n] L. B. Liu, “Development of the Tuner in the CAFe Accelerator”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPTEV001, pp..
[n] J. A. MacLachlan, F. E. Mills, and T. L. Owens, “Feed-Forward Compensation for Transient Beam Loading of the 805 MHz Debuncher for the Fermilab Linac Upgrade”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU403, pp. 303-305.
[n] Y. L. Huang et al., “Superconducting Elliptical Cavities Developed in IMP for the CiADS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2883-2885. doi:10.18429/JACoW-IPAC2019-WEPRB032
[n] T. Shinozuka, M. Fujioka, K. Ishii, S. Morita, H. Orihara, and K. Sera, “Status Report of the Tohoku AVF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-06, pp. 117-119.
[n] M. G. Mazarakis et al., “Experimental Investigation of Beam Generation, Acceleration, Transport, and Extraction in the RADLAC-II Pulsed Transmission Line Linear Accelerator”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-38, pp. 534-536.
[n] K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
[n] A. Glazov et al., “20 MeV Cyclotron for Isotope Production”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper II-04, pp. 123-125.
[n] S. F. Martins, S. Fonseca, W. Lu, W. B. Mori, and L. O. Silva, “Boosted Frame PIC Simulations of LWFA: Towards the Energy Frontier”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GBC05, pp. 3160-3162.
[n] M. Ritzert, “Interfacing EPICS to the Widespread Platform Management Interface IPMI”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 746-748. doi:10.18429/JACoW-ICALEPCS2015-WEPGF024
[n] T. Saito, M. Inoue, A. Shimizu, H. Tamura, and I. Miura, “Aluminium RF Cavity for the RCNP Ring Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J13, pp. 381-384.
[n] J. J. Dang et al., “Development of Target/ion Source for Li-8 Beam at KOMAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1718-1720. doi:10.18429/JACoW-IPAC2018-TUPML075
[n] P. Mandrillon et al., “The European Light Ion Medical Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1474-1477.
[n] R. Banwari et al., “300 kV/ 6 kW Power Supply System for Self-shielded Low Energy DC Accelerator at RRCAT Indore”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA039, pp. 679-681.
[n] W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 201-204. doi:10.18429/JACoW-MEDSI2016-TUPE18
[n] G. Y. Wang, L. Kang, J. B. Yu, J. S. Zhang, and J. X. Chen, “DESIGN OF A LAYERED HIGH PRECISION MAGNET GIRDER”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 277-279. doi:10.18429/JACoW-MEDSI2018-WEPH32
[n] J. Hinkson, G. Behrsing, E. Hazelton, W. Hearn, and H. Lancaster, “A New, Rugged, High Power Cockcroft-Walton Power Supply”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2961-2964.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Lee et al., “Emittance Measurements at the PAL-XFEL Injector Test Facility”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 690-693.
- J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 280-282.
- R. R. Stevens, J. D. Schneider, and J. D. Sherman, “Injector Design for High-Current CW Proton Linacs”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3166-3169.
- H. Padamsee, J. Kirchgessner, J. Mioduszewski, R. Sundelin, and M. Tigner, “/sup> Colliding Beam Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3240-3242.
- Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714.
- M. Chung et al., “Longitudinal Electron Bunch Shaping Experiments at the PAL-ITF”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 694-697.
- L. Cultrera et al., “Photocathode Growth and Characterization Advances at Cornell University”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3990-3992.
- C. Charrondière et al., “Labview-Based Template for Enhanced Accelerator Systems Control: Software Solutions for the CERN-ISOLDE Facilities”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP088, pp. 735-739.
- J. Rosenzweig and E. Colby, “Charge and Wavelength Scaling of RF Photoinjectors: A Design Tool”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB05, pp. 957-960.
- A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2898-2901.
- L. B. Liu, “Development of the Tuner in the CAFe Accelerator”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPTEV001, pp..
- J. A. MacLachlan, F. E. Mills, and T. L. Owens, “Feed-Forward Compensation for Transient Beam Loading of the 805 MHz Debuncher for the Fermilab Linac Upgrade”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU403, pp. 303-305.
- Y. L. Huang et al., “Superconducting Elliptical Cavities Developed in IMP for the CiADS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2883-2885.
- T. Shinozuka, M. Fujioka, K. Ishii, S. Morita, H. Orihara, and K. Sera, “Status Report of the Tohoku AVF Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-06, pp. 117-119.
- M. G. Mazarakis et al., “Experimental Investigation of Beam Generation, Acceleration, Transport, and Extraction in the RADLAC-II Pulsed Transmission Line Linear Accelerator”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-38, pp. 534-536.
- K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
- A. Glazov et al., “20 MeV Cyclotron for Isotope Production”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper II-04, pp. 123-125.
- S. F. Martins, S. Fonseca, W. Lu, W. B. Mori, and L. O. Silva, “Boosted Frame PIC Simulations of LWFA: Towards the Energy Frontier”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH4GBC05, pp. 3160-3162.
- M. Ritzert, “Interfacing EPICS to the Widespread Platform Management Interface IPMI”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 746-748.
- T. Saito, M. Inoue, A. Shimizu, H. Tamura, and I. Miura, “Aluminium RF Cavity for the RCNP Ring Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J13, pp. 381-384.
- J. J. Dang et al., “Development of Target/ion Source for Li-8 Beam at KOMAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1718-1720.
- P. Mandrillon et al., “The European Light Ion Medical Accelerator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1474-1477.
- R. Banwari et al., “300 kV/ 6 kW Power Supply System for Self-shielded Low Energy DC Accelerator at RRCAT Indore”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA039, pp. 679-681.
- W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 201-204.
- G. Y. Wang, L. Kang, J. B. Yu, J. S. Zhang, and J. X. Chen, “DESIGN OF A LAYERED HIGH PRECISION MAGNET GIRDER”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 277-279.
- J. Hinkson, G. Behrsing, E. Hazelton, W. Hearn, and H. Lancaster, “A New, Rugged, High Power Cockcroft-Walton Power Supply”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2961-2964.
Back to search