Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. O. Sidorin et al., “Status of the Nuclotron. 'Nuclotron-M' project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD008, pp. 684-686.
[n] M. G. Atanasov et al., “Upgrade of the TCDQ Diluters for the LHC Beam Dump System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3079-3082. doi:10.18429/JACoW-IPAC2015-WEPMN067
[n] D. M?ñder et al., “R&D of the 17 MeV MYRRHA Injector”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP064, pp. 202-204.
[n] R. Singh, P. Forck, P. Kowina, and A. Reiter, “Digital Processing of Pick-up Signals for Position and Tune Determination”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 321-326. doi:10.18429/JACoW-IBIC2015-TUPB010
[n] K. Thoma, M. Droba, and O. Meusel, “Mutual interaction of 2m long electron plasma ensembles with an ion beam in MeV range”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2451-2454. doi:10.18429/JACoW-IPAC2023-TUPM101
[n] D. Beltr?ín and M. Gonzalez, “A Proposal for Modeling the Control System for the Spanish Light Source in UML”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU501, pp. XX-XX.
[n] J. P. VanDevender and T. P. Wright, “Progress on the Particle Beam Fusion Accelerator II for Light Ion Fusion”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1975-1979.
[n] X. Liu, O. Kamigaito, N. Sakamoto, and K. Yamada, “Preliminary Design of a High-intensity Continuous-wave Deuteron RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2287-2289. doi:10.18429/JACoW-IPAC2017-TUPVA089
[n] P. Zhang et al., “Status and Progress of the RF System for High Energy Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1165-1168. doi:10.18429/JACoW-IPAC2021-MOPAB380
[n] V. A. Dimov et al., “Beam Commissioning of the 750 MHz Proton RFQ for the LIGHT Prototype”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 658-660. doi:10.18429/JACoW-IPAC2018-TUPAF002
[n] S. S. Gilardoni et al., “First Results for the Beam Commissioning of the CERN Multi-Turn Extraction”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP022, pp. 1578-1580.
[n] R. Moser, M. Cerv, S. Magnoni, H. Pavetits, P. Paz Neira, and K. Stachyra, “Control and Interlock Systems for the LIGHT Prototype”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1683-1687. doi:10.18429/JACoW-ICALEPCS2017-THPHA130
[n] S. J. Brooks, “Potential and Issues for Future Accelerators and Ultimate Colliders”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 578-583. doi:10.18429/JACoW-IPAC2018-TUXGBD1
[n] T. J. Shea, J. Mead, and C. M. Degen, “DSP Based Data Acquisition for RHIC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB12, pp. 2551-2553.
[n] A. Benot-Morell, A. Faus-Golfe, M. Wendt, J. M. Nappa, and S. Vilalte, “Beam Tests of a Prototype Stripline Beam Position Monitoring System for the Drive Beam of the CLIC Two-beam Module at CTF3”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 270-272. doi:10.18429/JACoW-IPAC2016-MOPMR019
For LaTeX
Use Complete Form
For BibTeX
References
- A. O. Sidorin et al., “Status of the Nuclotron. 'Nuclotron-M' project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD008, pp. 684-686.
- M. G. Atanasov et al., “Upgrade of the TCDQ Diluters for the LHC Beam Dump System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3079-3082.
- D. M?ñder et al., “R&D of the 17 MeV MYRRHA Injector”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP064, pp. 202-204.
- R. Singh, P. Forck, P. Kowina, and A. Reiter, “Digital Processing of Pick-up Signals for Position and Tune Determination”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 321-326.
- K. Thoma, M. Droba, and O. Meusel, “Mutual interaction of 2m long electron plasma ensembles with an ion beam in MeV range”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM101, pp. 2451-2454.
- D. Beltr?ín and M. Gonzalez, “A Proposal for Modeling the Control System for the Spanish Light Source in UML”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU501, pp. XX-XX.
- J. P. VanDevender and T. P. Wright, “Progress on the Particle Beam Fusion Accelerator II for Light Ion Fusion”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1975-1979.
- X. Liu, O. Kamigaito, N. Sakamoto, and K. Yamada, “Preliminary Design of a High-intensity Continuous-wave Deuteron RFQ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2287-2289.
- P. Zhang et al., “Status and Progress of the RF System for High Energy Photon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1165-1168.
- V. A. Dimov et al., “Beam Commissioning of the 750 MHz Proton RFQ for the LIGHT Prototype”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 658-660.
- S. S. Gilardoni et al., “First Results for the Beam Commissioning of the CERN Multi-Turn Extraction”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP022, pp. 1578-1580.
- R. Moser, M. Cerv, S. Magnoni, H. Pavetits, P. Paz Neira, and K. Stachyra, “Control and Interlock Systems for the LIGHT Prototype”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1683-1687.
- S. J. Brooks, “Potential and Issues for Future Accelerators and Ultimate Colliders”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 578-583.
- T. J. Shea, J. Mead, and C. M. Degen, “DSP Based Data Acquisition for RHIC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB12, pp. 2551-2553.
- A. Benot-Morell, A. Faus-Golfe, M. Wendt, J. M. Nappa, and S. Vilalte, “Beam Tests of a Prototype Stripline Beam Position Monitoring System for the Drive Beam of the CLIC Two-beam Module at CTF3”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 270-272.
Back to search