Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Arzumanov, A. Borisenko, and S. Lysukhin, “Energy Calibration and Energy Spread Measurements of the 1 MV Tandem Accelerator at Alma-Ata”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 495-498.
[n] A. P. Lee, M. C. Chou, H. P. Hsueh, J.-Y. Hwang, W. K. Lau, and P. Wang, “The High Brightness Photo-injector for THz CUR/VUV FEL at NSRRC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1125-1127. doi:10.18429/JACoW-IPAC2019-MOPTS105
[n] C. Montag and B. Parker, “Design of the 2015 Erhic Ring-Ring Interaction Region”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3129-3131. doi:10.18429/JACoW-IPAC2016-WEPOY058
[n] J. A. Fasolo, G. J. Marmer, and J. S. Moenich, “Design and Performance Characteristics of the Zero Gradient Synchrotron (ZGS) H - Ion Source and Related Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 94-97.
[n] M. Awschalom, L. Grumboski, A. F. Hrejsa, G. M. Lee, and I. Rosenberg, “The Fermilab Cancer Therapy Facility: Status Report After 2.5 Years of Operation”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3068-3071.
[n] J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
[n] A. J. Dobbs, D. Adey, and L. Coney, “MICE Muon Beamline Particle Rate and Related Beam Loss in the ISIS Synchrotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ035, pp. 874-876.
[n] E. Haas et al., “Engineering Design of the XPD & PDF Beamline Sample Environment for Safe Experimental Use of Hazardous Gases”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 379-381. doi:10.18429/JACoW-MEDSI2018-THPH19
[n] R. B. Nussbaumer et al., “ARIEL Control System at TRIUMF - Status Update”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 460-463. doi:10.18429/JACoW-ICALEPCS2015-MOPGF160
[n] M. A. Pop and S. Werin, “Considerations on Implementing EEHG with a Strong Linear Chirp”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1830-1832. doi:10.18429/JACoW-IPAC2019-TUPRB071
[n] U. Bartz and A. Schempp, “A CW RFQ Prototype”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP279, pp. 1352-1354.
[n] G. Stanford et al., “Mechanical Design, Construction and Alignment of the ISAC RFQ Accelerator at TRIUMF”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4094, pp. 980-982.
[n] X. P. Ding et al., “Influence of Proton Beam Emittances on Particle Production off a Muon Collider Target”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI069, pp. 1511-1513.
[n] Y. T. Ding et al., “Femtosecond Electron Beam and X-ray Beams at the Linac Coherent Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA086, pp. 1316-1318.
[n] E. D. Hudson, R. S. Lord, and W. H. White Jr, “Operating Characteristics of the ORIC Beam Extraction System”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-008, pp. XX-XX.
[n] P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2794-2797. doi:10.18429/JACoW-IPAC2019-WEPRB001
[n] R. Galiana, D. Manglunki, and C. Mazeline, “A Carbon Jet Beam Profile Monitor for LEAR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1198-1201.
[n] C. Roose, C. Boehme, I. Dolenc Kittelmann, A. Jansson, C. A. Thomas, and A. K?ñllberg, “Development of Non-invasive Transverse Profile Monitors for the ESS Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3656-3658. doi:10.18429/JACoW-IPAC2014-THPME167
[n] J.-C. Chang et al., “Power Saving Status at NSSRC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3173-3175. doi:10.18429/JACoW-IPAC2015-WEPHA028
[n] M. Volpi et al., “High Power and High Repetition Rate X-band Power Source Using Multiple Klystrons”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4552-4555. doi:10.18429/JACoW-IPAC2018-THPMK104
[n] M. A. D. Wilson, “CW Racetrack Microtrons”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 71-76.
[n] A. Bardi et al., “The CDF-II Online Silicon Vertex Tracker”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THBT003, pp. XX-XX.
[n] D. Einfeld, F. Perez, S. Voigt, and M. Humpert, “Interlock and Control for the RF system of the ANKA Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP62, pp. 806-808.
[n] G. Geschonke, “Results from the CLIC Test Facility CTF3 and Update on the CLIC Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THYG02, pp. 2912-2916.
[n] Y. T. Li, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Phase Shifter Power Supply Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3576-3578. doi:10.18429/JACoW-IPAC2016-THPMW017
[n] K. N. Sjobak et al., “New Features of the 2017 SixTrack Release”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3815-3818. doi:10.18429/JACoW-IPAC2017-THPAB047
[n] A. Oeftiger et al., “Review of CPU and GPU Faddeeva Implementations”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3090-3093. doi:10.18429/JACoW-IPAC2016-WEPOY044
[n] H. A. Watkins, J. D. Gilpatrick, V. G. Kutac, D. Martinez, and R. B. Shurter, “Beam Position and Phase Monitor - Wire Mapping System”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG017, pp. 62-64.
[n] R. Kersevan, “The Vacuum System of the Extra-Low Energy Antiproton Decelerator ELENA at CERN”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3119-3122. doi:10.18429/JACoW-IPAC2015-WEPHA010
[n] W. J. Gallagher, “Properties of Disc-Loaded Cylindrical Waveguide Propagating the TM-02 Mode”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-10, pp. 194-195.
[n] A. Mazzolari, S. Baricordi, V. Guidi, G. Martinelli, and D. Vincenzi, “Fabrication of Crystals for Channelling of Particles in Accelerators”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD033, pp. 1497-1499.
[n] K. Cerff, D. Haas, J. Jakel, and M. Schmitt, “Setup and Diagnostics of Motion Control at ANKA Beamlines”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO018, pp. 198-200.
[n] J. D. Jarvis et al., “Fabrication of Self-Aligned-Gate Diamond Field-Emitter-Array Triodes for Free-Electron Lasers”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC60, pp. 376-378.
[n] P. M. Sal?®n et al., “Results from the Optical Replica Synthesizer at FLASH”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper THOB02, pp. 739-745.
[n] R. Tolle et al., “HESR at FAIR: Status of Technical Planning”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN024, pp. 1442-1444.
[n] M. Grieser, M. Beutelspacher, D. Schwalm, A. Wolf, and T. Shirai, “New Results on Electron Cooling at the TSR Heidelberg”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE104, pp. 578-580.
[n] N. Vogt-Nilsen, “Status Report on the CERN Synchrocyclotron Improvement Programme”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69H05, pp. XX-XX.
[n] D. Trbojevic et al., “Electron Acceleration for e-RHIC with the Non-scaling FFAG”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT174, pp. 932-934.
[n] X. P. Ding, J. S. Berg, D. B. Cline, and H. G. Kirk, “Optimized Parameters for a Mercury Jet Target”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP102, pp. 2748-2750.
[n] M. Prome, “ELFE, an Electron Laboratory for Europe”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 181-184.
[n] R. Tomas, M. Hayes, and F. Schmidt, “Completion of the Sextupole Driving Terms Measurement at the SPS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB081, pp. 2231-2233.
[n] B. Babacan et al., “Pre-commissioning of the wide-dynamic range halo monitor to be installed in the Fermilab MI-8 line”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 513-517. doi:10.18429/JACoW-IBIC2025-TUPMO21
[n] D. Horan, D. J. Bromberek, A. Goel, T. J. Madden, A. Nassiri, and G. J. Waldschmidt, “Design and Testing of a 12 kW, 352 MHz Solid State rf System at the Advanced Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2378-2380. doi:10.18429/JACoW-IPAC2018-WEPMF005
[n] M. Bergher et al., “Status Report on D. C. I.”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1860-1863.
[n] S. E. Alden, S. M. Gibson, and L. J. Nevay, “A Simulation Framework for Photon-Particle Interactions for Laserwires and Further Applications”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4045-4048. doi:10.18429/JACoW-IPAC2019-THPRB095
[n] Y. C. Yang, C. K. Chan, C.-C. Chang, A. Y. Chen, J.-Y. Chuang, and C. H. Huang, “The Beam Cleaning Analysis for the TPS Vacuum System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1344-1346. doi:10.18429/JACoW-IPAC2019-TUPMP042
[n] R. E. Williamson, D. J. Adams, and C. M. Warsop, “High Intensity Longitudinal Dynamics Studies for Higher Energy Injection into the ISIS Synchrotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS019, pp. 640-642.
[n] S. M. Gibson, A. Bosco, S. E. Alden, A. P. Letchford, and J. K. Pozimski, “A Novel Longitudinal Laserwire to Non-Invasively Measure 6-Dimensional Bunch Parameters at High Current Hydrogen Ion Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2349-2352. doi:10.18429/JACoW-IPAC2018-WEPAL072
[n] M. Pieck et al., “Beam Diagnostics Instrumentation for a 6.7-MeV Proton Beam Halo Experiment”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC15, pp. 184-186.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Arzumanov, A. Borisenko, and S. Lysukhin, “Energy Calibration and Energy Spread Measurements of the 1 MV Tandem Accelerator at Alma-Ata”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 495-498.
- A. P. Lee, M. C. Chou, H. P. Hsueh, J.-Y. Hwang, W. K. Lau, and P. Wang, “The High Brightness Photo-injector for THz CUR/VUV FEL at NSRRC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1125-1127.
- C. Montag and B. Parker, “Design of the 2015 Erhic Ring-Ring Interaction Region”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3129-3131.
- J. A. Fasolo, G. J. Marmer, and J. S. Moenich, “Design and Performance Characteristics of the Zero Gradient Synchrotron (ZGS) H - Ion Source and Related Systems”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 94-97.
- M. Awschalom, L. Grumboski, A. F. Hrejsa, G. M. Lee, and I. Rosenberg, “The Fermilab Cancer Therapy Facility: Status Report After 2.5 Years of Operation”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3068-3071.
- J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
- A. J. Dobbs, D. Adey, and L. Coney, “MICE Muon Beamline Particle Rate and Related Beam Loss in the ISIS Synchrotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ035, pp. 874-876.
- E. Haas et al., “Engineering Design of the XPD & PDF Beamline Sample Environment for Safe Experimental Use of Hazardous Gases”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 379-381.
- R. B. Nussbaumer et al., “ARIEL Control System at TRIUMF - Status Update”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 460-463.
- M. A. Pop and S. Werin, “Considerations on Implementing EEHG with a Strong Linear Chirp”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1830-1832.
- U. Bartz and A. Schempp, “A CW RFQ Prototype”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP279, pp. 1352-1354.
- G. Stanford et al., “Mechanical Design, Construction and Alignment of the ISAC RFQ Accelerator at TRIUMF”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4094, pp. 980-982.
- X. P. Ding et al., “Influence of Proton Beam Emittances on Particle Production off a Muon Collider Target”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI069, pp. 1511-1513.
- Y. T. Ding et al., “Femtosecond Electron Beam and X-ray Beams at the Linac Coherent Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA086, pp. 1316-1318.
- E. D. Hudson, R. S. Lord, and W. H. White Jr, “Operating Characteristics of the ORIC Beam Extraction System”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-008, pp. XX-XX.
- P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2794-2797.
- R. Galiana, D. Manglunki, and C. Mazeline, “A Carbon Jet Beam Profile Monitor for LEAR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1198-1201.
- C. Roose, C. Boehme, I. Dolenc Kittelmann, A. Jansson, C. A. Thomas, and A. K?ñllberg, “Development of Non-invasive Transverse Profile Monitors for the ESS Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3656-3658.
- J.-C. Chang et al., “Power Saving Status at NSSRC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3173-3175.
- M. Volpi et al., “High Power and High Repetition Rate X-band Power Source Using Multiple Klystrons”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4552-4555.
- M. A. D. Wilson, “CW Racetrack Microtrons”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 71-76.
- A. Bardi et al., “The CDF-II Online Silicon Vertex Tracker”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THBT003, pp. XX-XX.
- D. Einfeld, F. Perez, S. Voigt, and M. Humpert, “Interlock and Control for the RF system of the ANKA Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP62, pp. 806-808.
- G. Geschonke, “Results from the CLIC Test Facility CTF3 and Update on the CLIC Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THYG02, pp. 2912-2916.
- Y. T. Li, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Phase Shifter Power Supply Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3576-3578.
- K. N. Sjobak et al., “New Features of the 2017 SixTrack Release”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3815-3818.
- A. Oeftiger et al., “Review of CPU and GPU Faddeeva Implementations”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3090-3093.
- H. A. Watkins, J. D. Gilpatrick, V. G. Kutac, D. Martinez, and R. B. Shurter, “Beam Position and Phase Monitor - Wire Mapping System”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG017, pp. 62-64.
- R. Kersevan, “The Vacuum System of the Extra-Low Energy Antiproton Decelerator ELENA at CERN”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3119-3122.
- W. J. Gallagher, “Properties of Disc-Loaded Cylindrical Waveguide Propagating the TM-02 Mode”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IV-10, pp. 194-195.
- A. Mazzolari, S. Baricordi, V. Guidi, G. Martinelli, and D. Vincenzi, “Fabrication of Crystals for Channelling of Particles in Accelerators”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD033, pp. 1497-1499.
- K. Cerff, D. Haas, J. Jakel, and M. Schmitt, “Setup and Diagnostics of Motion Control at ANKA Beamlines”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO018, pp. 198-200.
- J. D. Jarvis et al., “Fabrication of Self-Aligned-Gate Diamond Field-Emitter-Array Triodes for Free-Electron Lasers”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC60, pp. 376-378.
- P. M. Sal?®n et al., “Results from the Optical Replica Synthesizer at FLASH”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper THOB02, pp. 739-745.
- R. Tolle et al., “HESR at FAIR: Status of Technical Planning”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN024, pp. 1442-1444.
- M. Grieser, M. Beutelspacher, D. Schwalm, A. Wolf, and T. Shirai, “New Results on Electron Cooling at the TSR Heidelberg”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE104, pp. 578-580.
- N. Vogt-Nilsen, “Status Report on the CERN Synchrocyclotron Improvement Programme”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69H05, pp. XX-XX.
- D. Trbojevic et al., “Electron Acceleration for e-RHIC with the Non-scaling FFAG”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT174, pp. 932-934.
- X. P. Ding, J. S. Berg, D. B. Cline, and H. G. Kirk, “Optimized Parameters for a Mercury Jet Target”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP102, pp. 2748-2750.
- M. Prome, “ELFE, an Electron Laboratory for Europe”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 181-184.
- R. Tomas, M. Hayes, and F. Schmidt, “Completion of the Sextupole Driving Terms Measurement at the SPS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB081, pp. 2231-2233.
- B. Babacan et al., “Pre-commissioning of the wide-dynamic range halo monitor to be installed in the Fermilab MI-8 line”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 513-517.
- D. Horan, D. J. Bromberek, A. Goel, T. J. Madden, A. Nassiri, and G. J. Waldschmidt, “Design and Testing of a 12 kW, 352 MHz Solid State rf System at the Advanced Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2378-2380.
- M. Bergher et al., “Status Report on D. C. I.”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1860-1863.
- S. E. Alden, S. M. Gibson, and L. J. Nevay, “A Simulation Framework for Photon-Particle Interactions for Laserwires and Further Applications”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4045-4048.
- Y. C. Yang, C. K. Chan, C.-C. Chang, A. Y. Chen, J.-Y. Chuang, and C. H. Huang, “The Beam Cleaning Analysis for the TPS Vacuum System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1344-1346.
- R. E. Williamson, D. J. Adams, and C. M. Warsop, “High Intensity Longitudinal Dynamics Studies for Higher Energy Injection into the ISIS Synchrotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS019, pp. 640-642.
- S. M. Gibson, A. Bosco, S. E. Alden, A. P. Letchford, and J. K. Pozimski, “A Novel Longitudinal Laserwire to Non-Invasively Measure 6-Dimensional Bunch Parameters at High Current Hydrogen Ion Accelerators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2349-2352.
- M. Pieck et al., “Beam Diagnostics Instrumentation for a 6.7-MeV Proton Beam Halo Experiment”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC15, pp. 184-186.
Back to search