Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. M. Kazakevich et al., “A High-power 650 MHz CW Magnetron Transmitter for Intensity Frontier Superconducting Accelerators”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC060, pp. 2351-2353.
[n] S. Shu and F. Zhao, “RF Modulation Studies on the S-Band Pulse Compressor”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2937-2939. doi:10.18429/JACoW-IPAC2015-WEPMN011
[n] A. Bungau, C. Bungau, R. Cywinski, P. J. C. King, and J. S. Lord, “GEANT4 Validation Studies at the ISIS Muon Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA075, pp. 247-249.
[n] F. M. Velotti et al., “Characterisation of the SPS Slow-extraction Parameters”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3918-3921. doi:10.18429/JACoW-IPAC2016-THPOR055
[n] V. Papadimitriou et al., “Design of the LBNE Beamline”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 907-909. doi:10.18429/JACoW-IPAC2014-TUOAA02
[n] E. V. Bulyak et al., “3.5 GeV Superconducting Stacking Ring for Compton Based Polarized Positrons Source of CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME056, pp. 1697-1699.
[n] R. Olsen, “PEP-II 16-Channel Corrector Controller Using BITBUS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P015, pp. 3485-3487.
[n] L. Nielsen, N. Bourcey, V. Parma, P. Rohmig, J.-B. Bergot, and E. Roy, “Thermal Performance of the LHC Short Straight Section Cryostat”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE024, pp. 2526-2528.
[n] P. Gayet and C. H. Sicard, “Deployment and Integration of Industrial Controls: The Case of LHC Cryogenics Controls”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP545, pp. XX-XX.
[n] J. M. Koch, “DSP Design Using System Generator”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC082, pp. 770-773.
[n] P. Echevarria, J. Knobloch, O. Kugeler, A. Neumann, A. Ushakov, and K. P. Przygoda, “First LLRF Tests of BERLinPro Gun Cavity Prototype”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1831-1834. doi:10.18429/JACoW-IPAC2016-TUPOW035
[n] A. Y. Zelinsky et al., “Start-up of the NESTOR Facility Vacuum System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI079, pp. 3478-3480.
[n] W. T. Weng, “The AGS New Fast Extraction System and the Single Bunch Extraction Test”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2956-2959.
[n] R. H. A. Farias, A. P. B. Lima, L. Liu, and F. S. Oliveira, “Design and Status of Sirius Light Source RF Systems”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2391-2393. doi:10.18429/JACoW-IPAC2018-WEPMF011
[n] X. Wang and F. Long, “Study on the Control Technology of Large-load Time Constant Accelerator Magnet Power Supply”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 239-241. doi:10.18429/JACoW-LINAC2018-MOPO116
For LaTeX
Use Complete Form
For BibTeX
References
- G. M. Kazakevich et al., “A High-power 650 MHz CW Magnetron Transmitter for Intensity Frontier Superconducting Accelerators”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC060, pp. 2351-2353.
- S. Shu and F. Zhao, “RF Modulation Studies on the S-Band Pulse Compressor”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2937-2939.
- A. Bungau, C. Bungau, R. Cywinski, P. J. C. King, and J. S. Lord, “GEANT4 Validation Studies at the ISIS Muon Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA075, pp. 247-249.
- F. M. Velotti et al., “Characterisation of the SPS Slow-extraction Parameters”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3918-3921.
- V. Papadimitriou et al., “Design of the LBNE Beamline”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 907-909.
- E. V. Bulyak et al., “3.5 GeV Superconducting Stacking Ring for Compton Based Polarized Positrons Source of CLIC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME056, pp. 1697-1699.
- R. Olsen, “PEP-II 16-Channel Corrector Controller Using BITBUS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P015, pp. 3485-3487.
- L. Nielsen, N. Bourcey, V. Parma, P. Rohmig, J.-B. Bergot, and E. Roy, “Thermal Performance of the LHC Short Straight Section Cryostat”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE024, pp. 2526-2528.
- P. Gayet and C. H. Sicard, “Deployment and Integration of Industrial Controls: The Case of LHC Cryogenics Controls”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP545, pp. XX-XX.
- J. M. Koch, “DSP Design Using System Generator”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC082, pp. 770-773.
- P. Echevarria, J. Knobloch, O. Kugeler, A. Neumann, A. Ushakov, and K. P. Przygoda, “First LLRF Tests of BERLinPro Gun Cavity Prototype”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1831-1834.
- A. Y. Zelinsky et al., “Start-up of the NESTOR Facility Vacuum System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI079, pp. 3478-3480.
- W. T. Weng, “The AGS New Fast Extraction System and the Single Bunch Extraction Test”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2956-2959.
- R. H. A. Farias, A. P. B. Lima, L. Liu, and F. S. Oliveira, “Design and Status of Sirius Light Source RF Systems”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2391-2393.
- X. Wang and F. Long, “Study on the Control Technology of Large-load Time Constant Accelerator Magnet Power Supply”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 239-241.
Back to search