Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “Theoretical Investigation of Coherent Synchrotron Radiation Induced Microbunching Instability in Transport and Recirculation Arcs”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP022, pp. 730-734.
[n] N. Akasaka et al., “Fundamental Mode Characteristics of ARES Cavity Under Beam Environment”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P030, pp. 2974-2976.
[n] M. A. Fraser et al., “SPS Slow Extraction Losses and Activation: Update on Recent Improvements”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2391-2394. doi:10.18429/JACoW-IPAC2019-WEPMP031
[n] P. Beller, K. Beckert, A. Dolinskii, B. Franzke, F. Nolden, and M. Steck, “Layout of a New Experimental Storage Ring NESR at GSI”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE077, pp. 545-547.
[n] F. E. Eints et al., “Control Path of Longitudinal Multibunch-feedback System at HERA-p”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH084, pp. 2982-2984.
[n] K. Jensen, D. W. Feldman, N. A. Moody, P. G. O, J. L. Shaw, and J. E. Yater, “The Development and Application of a Photoemission Model for Cesiated Photocathode Surfaces”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH068, pp. 744-747.
[n] P. Ch. Chochula et al., “Challenges of the ALICE Detector Control System for the LHC RUN3”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 323-327. doi:10.18429/JACoW-ICALEPCS2017-TUMPL09
[n] R. L. Madrak, V. S. Kashikhin, A. V. Makarov, and D. Wildman, “Perpendicularly Biased YIG Tuners for the Fermilab Recycler 52.809 MHz RF Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA14, pp. 1013-1015.
[n] T. Suwada, K. Furukawa, and F. Miyahara, “Development of FPBA-Based TDC With Wide Dynamic Range for Monitoring the Trigger Timing Distribution System at the KEKB Injector Linac”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 70-74. doi:10.18429/JACoW-IBIC2015-MOPB017
[n] B. Copy, H. Milcent, and M. Z. Zimny, “Standards-Based Open-Source PLC Diagnostics Monitoring”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1151-1154. doi:10.18429/JACoW-ICALEPCS2015-THHD3O05
[n] T. Lefevre et al., “Instrumentation for Longitudinal Beam Gymnastics in FEL's and in the CLIC test facility 3”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEO1A03, pp. 215-217.
[n] S. Xu, G. Liu, Y. Song, and X. K. Sun, “Control System Design for Front End Devices of IRFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4920-4922. doi:10.18429/JACoW-IPAC2018-THPML109
[n] X. H. Chen and K.-U. Kasemir, “BOY, A Modern Graphical Operator Interface Editor and Runtime”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOBN3, pp. 1404-1406.
[n] G. Valentino, R. Bruce, S. Redaelli, R. Rossi, P. Theodoropoulos, and S. Jaster-Merz, “Anomaly Detection for Beam Loss Maps in the Large Hadron Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 92-95. doi:10.18429/JACoW-IPAC2017-MOPAB010
[n] A. M. Porcellato et al., “Improved on line performance of the installed ALPI Nb sputtered QWRs”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper FR-03, pp. 203-207.
[n] S. G. Arutunian, G. Decker, M. R. Mailian, and G. Rosenbaum, “Transition Thermal Processes In Vibrating Wire Monitors”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB26, pp. 292-294.
[n] S. Ramberger and M. R. Khalvati, “The DTL Post Coupler - An Ingenious Invention Turns 50”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 547-550. doi:10.18429/JACoW-LINAC2016-TUPLR038
[n] G. Tranquille, “Electron Cooling of Pb54+ Ions in LEIR”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-05, pp. 294-298.
[n] C. Zhang et al., “Front-End Linac Design and Beam Dynamics Simulations for MYRRHA”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB005, pp. 849-851.
[n] M. Vadai, A. Alomainy, and H. Damerau, “Barrier Bucket Studies in the CERN PS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1128-1131. doi:10.18429/JACoW-IPAC2019-MOPTS106
[n] E. Lopez Sola et al., “Beam Dump Facility Target: Design Status and Beam Tests in 2018”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2604-2607. doi:10.18429/JACoW-IPAC2018-WEPMG002
[n] S. Yamaguchi, A. Enomoto, and Y. Igarashi, “Analysis of High-Gradient Tests on the Accelerating Structures for the KEKB Injector Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16020, pp. XX-XX.
[n] D. B. Belohrad, S. Longo, OP. Odier, and S. Thoulet, “Mechanical Design of the Intensity Measurement Devices for the LHC”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB09, pp. 253-255.
For LaTeX
Use Complete Form
For BibTeX
References
- C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “Theoretical Investigation of Coherent Synchrotron Radiation Induced Microbunching Instability in Transport and Recirculation Arcs”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP022, pp. 730-734.
- N. Akasaka et al., “Fundamental Mode Characteristics of ARES Cavity Under Beam Environment”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P030, pp. 2974-2976.
- M. A. Fraser et al., “SPS Slow Extraction Losses and Activation: Update on Recent Improvements”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2391-2394.
- P. Beller, K. Beckert, A. Dolinskii, B. Franzke, F. Nolden, and M. Steck, “Layout of a New Experimental Storage Ring NESR at GSI”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE077, pp. 545-547.
- F. E. Eints et al., “Control Path of Longitudinal Multibunch-feedback System at HERA-p”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH084, pp. 2982-2984.
- K. Jensen, D. W. Feldman, N. A. Moody, P. G. O, J. L. Shaw, and J. E. Yater, “The Development and Application of a Photoemission Model for Cesiated Photocathode Surfaces”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH068, pp. 744-747.
- P. Ch. Chochula et al., “Challenges of the ALICE Detector Control System for the LHC RUN3”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 323-327.
- R. L. Madrak, V. S. Kashikhin, A. V. Makarov, and D. Wildman, “Perpendicularly Biased YIG Tuners for the Fermilab Recycler 52.809 MHz RF Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA14, pp. 1013-1015.
- T. Suwada, K. Furukawa, and F. Miyahara, “Development of FPBA-Based TDC With Wide Dynamic Range for Monitoring the Trigger Timing Distribution System at the KEKB Injector Linac”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 70-74.
- B. Copy, H. Milcent, and M. Z. Zimny, “Standards-Based Open-Source PLC Diagnostics Monitoring”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1151-1154.
- T. Lefevre et al., “Instrumentation for Longitudinal Beam Gymnastics in FEL's and in the CLIC test facility 3”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEO1A03, pp. 215-217.
- S. Xu, G. Liu, Y. Song, and X. K. Sun, “Control System Design for Front End Devices of IRFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4920-4922.
- X. H. Chen and K.-U. Kasemir, “BOY, A Modern Graphical Operator Interface Editor and Runtime”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOBN3, pp. 1404-1406.
- G. Valentino, R. Bruce, S. Redaelli, R. Rossi, P. Theodoropoulos, and S. Jaster-Merz, “Anomaly Detection for Beam Loss Maps in the Large Hadron Collider”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 92-95.
- A. M. Porcellato et al., “Improved on line performance of the installed ALPI Nb sputtered QWRs”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper FR-03, pp. 203-207.
- S. G. Arutunian, G. Decker, M. R. Mailian, and G. Rosenbaum, “Transition Thermal Processes In Vibrating Wire Monitors”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB26, pp. 292-294.
- S. Ramberger and M. R. Khalvati, “The DTL Post Coupler - An Ingenious Invention Turns 50”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 547-550.
- G. Tranquille, “Electron Cooling of Pb54+ Ions in LEIR”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper D-05, pp. 294-298.
- C. Zhang et al., “Front-End Linac Design and Beam Dynamics Simulations for MYRRHA”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB005, pp. 849-851.
- M. Vadai, A. Alomainy, and H. Damerau, “Barrier Bucket Studies in the CERN PS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1128-1131.
- E. Lopez Sola et al., “Beam Dump Facility Target: Design Status and Beam Tests in 2018”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2604-2607.
- S. Yamaguchi, A. Enomoto, and Y. Igarashi, “Analysis of High-Gradient Tests on the Accelerating Structures for the KEKB Injector Linac”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16020, pp. XX-XX.
- D. B. Belohrad, S. Longo, OP. Odier, and S. Thoulet, “Mechanical Design of the Intensity Measurement Devices for the LHC”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB09, pp. 253-255.
Back to search