Favourites
For Word
[n] T. Suzuki et al., “Present Status of a Multi-Bunch Electron Beam Linac Based on Cs-Te Photo-Cathode RF-Gun at Waseda University”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP102, pp. 608-610.
[n] V. N. Litvinenko et al., “Commissioning of the Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA08, pp. 213-215.
[n] A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2811-2814. doi:10.18429/JACoW-IPAC2016-WEPOW001
[n] G. Gulbekyan, O. N. Borisov, and V. I. Kazacha, “Extraction by Stripping of Heavy Ion Beams from Cyclotrons”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-02, pp. 286-290.
[n] B. Scott, R. Hettel, H.-D. Nuhn, and J. Sebek, “SSRL Beam Position Monitors”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1545-1548.
[n] F. J. Decker, “Channeling Crystals for Positron Production”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2002-2005.
[n] M. Harrison, “The RHIC Project - Status and Plans”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG03, pp. 401-405.
[n] J. Munilla et al., “Experience on Serial Production of the Quadrupole Movers with Submicrometric Repeatability for the European XFEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2271-2274. doi:10.18429/JACoW-IPAC2015-TUPWI015
[n] T. Zwart et al., “A Spin Control System for the South Hall Ring at the Bates Linear Accelerator Center”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA31, pp. 600-602.
[n] M. Busch et al., “First Measurements on the 325 MHz Superconducting CH Cavity”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB022, pp. 56-58.
[n] M. A. Harrison, R. B. Agustsson, P. S. Chang, T. J. Hodgetts, A. Y. Murokh, and M. Ruelas, “Design of a Fast, XFEL-quality Wire Scanner”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA080, pp. 867-869.
[n] A. P. Strokach et al., “CC-18/9M Cyclotron System”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WECA11, pp. 149-151.
[n] L. K. Mestha and K. S. Yeung, “Sychronization of a Variable Frequency Source with a Fixed Frequency Source Using a Sliding-Mode Controller”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1332-1335.
[n] R. G. Eichhorn, N. A. Stilin, and W. Weingarten, “N-Doped Niobium Accelerating Cavities: Analyzing Model Applicability”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1014-1016. doi:10.18429/JACoW-LINAC2016-THPLR074
[n] S. Z. Green et al., “Beam Diagnostic Challenges for FACET-II”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 32-36. doi:10.18429/JACoW-IBIC2017-MO3AB3
[n] G. D. Yendell, U. K. Pedersen, N. Tartoni, S. Williams, A. Greer, and T. C. Nicholls, “Odin - a Control and Data Acquisition Framework for Excalibur 1M and 3M Detectors”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 966-969. doi:10.18429/JACoW-ICALEPCS2017-TUPHA212
[n] H. Boehmer et al., “An Experiment on FEL Efficiency Enhancement with a Variable Wiggler”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3156-3160.
[n] J. A. Nolen and J. C. Dooling, “A Concept for Emittance Reduction of DC Radioactive Heavy-Ion Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ16, pp. 3320-3322.
[n] B. D. O et al., “Demonstration of Gigavolt-per-meter Accelerating Gradients using Cylindrical Dielectric-lined Waveguides”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 965-967. doi:10.18429/JACoW-IPAC2014-TUOBB02
[n] M. Washio et al., “Compact Picosecond Pulse Radiolysis System Using Photo-cathode RF Gun”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH188, pp. 2373-2375.
[n] C. A. Thomas, G. Rehm, F. Ewald, and J. W. Flanagan, “Large Aperture X-ray Monitors for Beam Profile Diagnostics”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEAL1, pp. 608-614.
[n] G. Baribaud et al., “Conversion of the CERN PS Booster Controls: Local Hardware Test and Accelerator Study Facilities”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2249-2252.
[n] K. L. F. Bane, H. Fukuma, T. Ieiri, K. Ohmi, and M. Tobiyama, “Impedance Measurements in the KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A12, pp. 1423-1425.
[n] E. Chishiro et al., “Development of 972 MHz Klystron for High-Intensity Proton Accelerator Facility”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU459, pp. 455-457.
[n] H. Hu, D. Bafia, and Y.-K. Kim, “Origins of quench in buffered chemical polished and low temperature baked SRF cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3082-3085. doi:10.18429/JACoW-IPAC2023-WEPA190
[n] M. G. Abbott et al., “Status of the Diamond Fast Orbit Feedback System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA10, pp. 535-537.
[n] N. Inabe, T. Katayama, K. Ohtomo, T. Tanabe, and M. Wakasugi, “New Lattice Design of Accumulator Cooler Ring for MUSES”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A11, pp. 566-568.
[n] M. A. Allen, M. J. Lee, and P. L. Morton, “Synchrotron Frequency Spliting in the SLAC Storage Ring”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1084-1086.
[n] M. Valette et al., “Effect of Quench Heater and CLIQ Firing on the Circulating HL-LHC Beam”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2101-2104. doi:10.18429/JACoW-IPAC2017-TUPVA023
[n] D. N. Shatilov and A. A. Zholents, “Spin Matching Conditions for a Storage Ring with Solenoid Rotators”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 917-920.
[n] R. A. Gough, R. Caylor, D. Howard, R. MacGill, J. Staples, and J. Tanabe, “A Compact Heavy Ion RFQ Preaccelerator for Use at the CERN Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3205-3208.
[n] J. Rodnizki, D. Hirschmann, Z. Horvitz, B. Kaizer, A. Perry, and L. Weissman, “SARAF 4-Rods RFQ RF Power Line Splitting Design and Test”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 693-697. doi:10.18429/JACoW-LINAC2016-TH1A04
[n] K. Aulenbacher, J. Diefenbach, R. G. Heine, and F. Schlander, “Status of the MESA Accelerator”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PLT01, pp. 1-5.
[n] U. Lehnert, P. Michel, R. Schurig, A. A. Aksoy, P. E. Evtushenko, and J. M. Kr?ñmer, “Bunch Compression of the Low-energy ELBE Electron Beam for Super-radiant THz Sources”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1123-1125. doi:10.18429/JACoW-IPAC2014-TUPRO044
[n] V. S. Kashikhin et al., “Superconducting Magnet Performance in LCLS-II Cryomodules”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2693-2696. doi:10.18429/JACoW-IPAC2018-WEPML009
[n] G. Sabbi et al., “Magnetic Design of a High Gradient Quadrupole for the LHC Low-$eta$ Insertions”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P004, pp. 3398-3400.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Suzuki et al., “Present Status of a Multi-Bunch Electron Beam Linac Based on Cs-Te Photo-Cathode RF-Gun at Waseda University”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP102, pp. 608-610.
- V. N. Litvinenko et al., “Commissioning of the Duke Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA08, pp. 213-215.
- A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2811-2814.
- G. Gulbekyan, O. N. Borisov, and V. I. Kazacha, “Extraction by Stripping of Heavy Ion Beams from Cyclotrons”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper D-02, pp. 286-290.
- B. Scott, R. Hettel, H.-D. Nuhn, and J. Sebek, “SSRL Beam Position Monitors”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1545-1548.
- F. J. Decker, “Channeling Crystals for Positron Production”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2002-2005.
- M. Harrison, “The RHIC Project - Status and Plans”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPG03, pp. 401-405.
- J. Munilla et al., “Experience on Serial Production of the Quadrupole Movers with Submicrometric Repeatability for the European XFEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2271-2274.
- T. Zwart et al., “A Spin Control System for the South Hall Ring at the Bates Linear Accelerator Center”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA31, pp. 600-602.
- M. Busch et al., “First Measurements on the 325 MHz Superconducting CH Cavity”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB022, pp. 56-58.
- M. A. Harrison, R. B. Agustsson, P. S. Chang, T. J. Hodgetts, A. Y. Murokh, and M. Ruelas, “Design of a Fast, XFEL-quality Wire Scanner”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA080, pp. 867-869.
- A. P. Strokach et al., “CC-18/9M Cyclotron System”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WECA11, pp. 149-151.
- L. K. Mestha and K. S. Yeung, “Sychronization of a Variable Frequency Source with a Fixed Frequency Source Using a Sliding-Mode Controller”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1332-1335.
- R. G. Eichhorn, N. A. Stilin, and W. Weingarten, “N-Doped Niobium Accelerating Cavities: Analyzing Model Applicability”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1014-1016.
- S. Z. Green et al., “Beam Diagnostic Challenges for FACET-II”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 32-36.
- G. D. Yendell, U. K. Pedersen, N. Tartoni, S. Williams, A. Greer, and T. C. Nicholls, “Odin - a Control and Data Acquisition Framework for Excalibur 1M and 3M Detectors”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 966-969.
- H. Boehmer et al., “An Experiment on FEL Efficiency Enhancement with a Variable Wiggler”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3156-3160.
- J. A. Nolen and J. C. Dooling, “A Concept for Emittance Reduction of DC Radioactive Heavy-Ion Beams”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ16, pp. 3320-3322.
- B. D. O et al., “Demonstration of Gigavolt-per-meter Accelerating Gradients using Cylindrical Dielectric-lined Waveguides”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 965-967.
- M. Washio et al., “Compact Picosecond Pulse Radiolysis System Using Photo-cathode RF Gun”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH188, pp. 2373-2375.
- C. A. Thomas, G. Rehm, F. Ewald, and J. W. Flanagan, “Large Aperture X-ray Monitors for Beam Profile Diagnostics”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEAL1, pp. 608-614.
- G. Baribaud et al., “Conversion of the CERN PS Booster Controls: Local Hardware Test and Accelerator Study Facilities”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2249-2252.
- K. L. F. Bane, H. Fukuma, T. Ieiri, K. Ohmi, and M. Tobiyama, “Impedance Measurements in the KEKB”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4A12, pp. 1423-1425.
- E. Chishiro et al., “Development of 972 MHz Klystron for High-Intensity Proton Accelerator Facility”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU459, pp. 455-457.
- H. Hu, D. Bafia, and Y.-K. Kim, “Origins of quench in buffered chemical polished and low temperature baked SRF cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA190, pp. 3082-3085.
- M. G. Abbott et al., “Status of the Diamond Fast Orbit Feedback System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA10, pp. 535-537.
- N. Inabe, T. Katayama, K. Ohtomo, T. Tanabe, and M. Wakasugi, “New Lattice Design of Accumulator Cooler Ring for MUSES”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5A11, pp. 566-568.
- M. A. Allen, M. J. Lee, and P. L. Morton, “Synchrotron Frequency Spliting in the SLAC Storage Ring”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1084-1086.
- M. Valette et al., “Effect of Quench Heater and CLIQ Firing on the Circulating HL-LHC Beam”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2101-2104.
- D. N. Shatilov and A. A. Zholents, “Spin Matching Conditions for a Storage Ring with Solenoid Rotators”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 917-920.
- R. A. Gough, R. Caylor, D. Howard, R. MacGill, J. Staples, and J. Tanabe, “A Compact Heavy Ion RFQ Preaccelerator for Use at the CERN Linac”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3205-3208.
- J. Rodnizki, D. Hirschmann, Z. Horvitz, B. Kaizer, A. Perry, and L. Weissman, “SARAF 4-Rods RFQ RF Power Line Splitting Design and Test”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 693-697.
- K. Aulenbacher, J. Diefenbach, R. G. Heine, and F. Schlander, “Status of the MESA Accelerator”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper PLT01, pp. 1-5.
- U. Lehnert, P. Michel, R. Schurig, A. A. Aksoy, P. E. Evtushenko, and J. M. Kr?ñmer, “Bunch Compression of the Low-energy ELBE Electron Beam for Super-radiant THz Sources”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1123-1125.
- V. S. Kashikhin et al., “Superconducting Magnet Performance in LCLS-II Cryomodules”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2693-2696.
- G. Sabbi et al., “Magnetic Design of a High Gradient Quadrupole for the LHC Low-$eta$ Insertions”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P004, pp. 3398-3400.
Back to search