Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Pierini, A. Bosotti, R. Paparella, D. Sertore, and E. Vogel, “Fabrication Experience of the Third Harmonic Superconducting Cavity Prototypes for the XFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP033, pp. 2064-2066.
[n] J. J. Petillo, A. J. Dudas, and M. E. Read, “Sheet Electron Beam Gun Design Using ARGUS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 888-891.
[n] E. Arevalo, W. Ackermann, R. Hampel, W. F. O. Muller, and T. Weiland, “Wake Field Computations for the PITZ Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN016, pp. 3931-3933.
[n] R. B. Deng, Y. Liu, L. Wang, and S. Xiang, “Vibration Measurements of Super-Conducting Undulator at SSRF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1675-1677. doi:10.18429/JACoW-IPAC2017-TUPAB146
[n] P. A. Seidl and J.-L. Vay, “Formation of High Charge State Heavy Ion Beams with Intense Space Charge”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP098, pp. 1657-1658.
[n] B. Farnham, “Automated testing of OPC Servers”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS006, pp. 985-988.
[n] J. Branlard et al., “RF Operation Experience at the European XFEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 109-111. doi:10.18429/JACoW-LINAC2018-MOPO038
[n] C. H. Kuo, J. Chen, K. T. Hsu, and K. H. Hu, “Functionality of the Digital Beam Position Monitor Test-Bed in NSRRC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB067, pp. 2557-2559.
[n] I. Hofmann, G. Franchetti, J. Qiang, and R. D. Ryne, “Dynamical Effects of the Montague Resonance”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT053, pp. 1960-1962.
[n] Z. G. Zong et al., “Tests on the 1.3 GHz Low Loss Single-Cell RF Superconducting Large Grain Cavities of IHEP”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP168, pp. 943-945.
[n] J. Kemppinen, Z. S. Kostka, and H. Mainaud Durand, “Cam Mover Alignment System Positioning with Wire Position Sensor Feedback for CLIC”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 32-34. doi:10.18429/JACoW-MEDSI2016-MOPE15
[n] U. R. Ristau, M. DiCastro, P. Duval, S. Fiedler, and A. Pazos, “The Concept of EMBL Beamline Control at Petra III”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOZ02, pp. 22-24.
[n] T. Olsson, R. Bartolini, and I. P. S. Martin, “Harmonic Cavity Design Choice for Lifetime Increase in Diamond-II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1585-1588. doi:10.18429/JACoW-IPAC2019-TUPGW078
[n] A. Schnase et al., “Control Loops for the J-PARC RCS Digital Low-Level RF Control”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT007, pp. 1063-1065.
[n] V. Grishin et al., “A Family of Gas Ionization Chambers and SEM for Beam Loss Monitoring of LHC and Other Accelerators”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 44-48. doi:10.18429/JACoW-RUPAC2018-TUZMH03
[n] V. Kamerdzhiev, V. A. Lebedev, and A. Semenov, “Towards Routine Operation of the Digital Tune Monitor in the Tevatron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC044, pp. 1155-1157.
[n] R. Secondo, J.-L. Vay, M. Venturini, J. D. Fox, C. H. Rivetta, and W. H?Âfle, “Simulation Results of a Feedback Control System to Damp Electron Cloud Single-Bunch Transverse Instabilities in the CERN SPS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP153, pp. 1773-1775.
[n] M. Brameld et al., “Evaluation of Coherent Terahertz Radiation Generated from Tilted Electron Beams Aiming for Higher Light Intensity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4642-4644. doi:10.18429/JACoW-IPAC2018-THPMK145
[n] M. Lechartier, D. Besnier, J. F. Leyge, and M. Michel, “Design of the MEBT Rebunchers for the SPIRAL 2 Driver”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper C-09, pp. 278-281.
[n] E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
[n] G. Vanbavinckhove, M. Aiba, R. Calaga, and R. Tom?ís, “Coupling and Vertical Dispersion Correction studies for the LHC using Skew Quadrupoles and Vertical Orbit Bumps”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE025, pp. 4569-4571.
[n] T. Koseki et al., “Quadrupole and Sextupole Magnets for the Super SOR Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE065, pp. 2355-2357.
[n] Y. Zou, Y. Cui, I. Haber, P. G. O, and M. Reiser, “Longitudinal Space-Charge Effects in a Retarding Field Energy Analyzer”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB005, pp. 511-513.
[n] Y. Hashimoto, T. Toyama, T. M. Mitsuhashi, M. Tejima, and S. Otsu, “A Development of High Sensitive Beam Profile Monitor using Multi-Screen”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUCL2, pp. 338-341.
[n] D. G. Kim, H.-C. Bhang, J.-W. Kim, J. Y. Kim, and C. C. Yun, “Study on the Injection System for Compact Cyclotron Mass Spectrometry”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA019, pp. 106-108.
[n] B. W. J. McNeil and N. Thompson, “Mode Locked Optical Klystron Configuration in an FEL Cavity Resonator”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOB4, pp. 558-561.
[n] S. Aytac, “Redesign of Alarm Monitoring System Application BeamlineAlarminfoClient" at DESY"”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO029, pp. 216-218.
[n] A. Stecchi et al., “!CHAOS General Status Report”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 17-21. doi:10.18429/JACoW-PCaPAC2018-WEC5
[n] S. Yu. Taskaev et al., “VITA Based Neutron Source - Status and Prospects”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRBCH04, pp. 230-232.
[n] E. Yamakawa, Y. Ishi, Y. Kuriyama, J.-B. Lagrange, Y. Mori, and T. Uesugi, “High Intensity Proton FFAG Ring with Serpentine Acceleration for ADS”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP209, pp. 60-63.
[n] F. R. Osswald, T. Adam, P. G. Graehling, M. Heine, C. Maazouzi, and E. K. Traykov, “Transverse Phase Space Scanner Developments at IPHC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 293-296. doi:10.18429/JACoW-IBIC2019-TUPP007
[n] R. Varela et al., “Beam Induced Fluorescence Measurements of 100 keV Deuterons in LIPAc Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1877-1880. doi:10.18429/JACoW-IPAC2018-WEPAF026
[n] Y. C. Yu et al., “Study on the Influence of the Range Shifter Material in a Scanning Nozzle for Proton Therapy Based on Monte Carlo Method”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4100-4102. doi:10.18429/JACoW-IPAC2019-THPRB118
[n] Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX.
[n] R. Nagaoka and L. Farvacque, “Analysis and Correction of Optical Asymmetry at the ESRF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE013, pp. 1166-1168.
[n] P. Leban, G. Brajnik, and R. De Monte, “Evaluation of Pilot-Tone Calibration Based BPM System at Elettra Sincrotrone Trieste”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2638-2640. doi:10.18429/JACoW-IPAC2019-WEPGW072
[n] T. Zhang, S. Ninomiya, K. Sato, S. Morioka, H. Saito, and Y. Sasaki, “Development for Large Dynamical Field Range,Wide Good Field Region C-Magnet”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH153, pp. 3603-3605.
[n] N. Dobeck et al., “Precision, 32 Channel Power Supply System”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU465, pp. 490-492.
[n] P. Matthews, Y. Kang, and R. Kustom, “Storage Ring Cavity Higher-Order Mode Dampers for the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPP12, pp. 1684-1686.
[n] K. Gubin et al., “Tests of High Temperature Intense Neutron Target Prototype.”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBZ03, pp. XX-XX.
[n] I. Syrachev, V. F. Vogel, H. Mizuno, J. Odagiri, Y. Otake, and S. Tokumoto, “The Results of RF High Power Tests of X-Band Open Cavity RF Pulse Compression System VPM(JLC)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-49, pp. 475-477.
[n] M. H. Foss, R. J. Lari, J. Simpson, and K. Thompson, “The Design of the Zero Gradient Synchrotron Booster II Ring Magnet”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1613-1617.
[n] P. Bertrand, “Longitudinal Resonances and Emittance Growth Using QWR/HWR in a Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT071, pp. 2014-2016.
[n] S. Tsujino et al., “Development of All-metal Stacked-double Gate Field Emitter Array Cathodes for X-ray Free-electron Laser Applications”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP041, pp. 811-814.
[n] M. K. Craddock, “Kaon Factories”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 1993-1998.
[n] M. J. Bajard, “Status of the Hadrontherapy ETOILE-Project in Lyon”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH158, pp. 2299-2301.
[n] D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 124-127. doi:10.18429/JACoW-MEDSI2016-TUBA04
[n] J. Ozelis, “Performance of Medium-Beta Elliptical Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP07, pp. 133-133.
[n] T. Hori, Y. Mikami, T. Takayama, and S. Yamada, “Operation Results of Compact SR Ring AURORA-2D with 7 Tesla Wiggler”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP10G, pp. 581-583.
[n] B. Balhan et al., “Modification of the LEP Electrostatic Separator Systems for Operation with Bunch Trains”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA15, pp. 557-559.
[n] D. Gex et al., “Engineering Issues of the Medium Energy Beam Transport Line and SRF Linac for the LIPAc”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2377-2379. doi:10.18429/JACoW-IPAC2016-WEPMR045
[n] R. Bacher et al., “The HERA Quench Protection System - A Status Report”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP039G, pp. 2264-2266.
[n] C.-Y. Tsai, J. Wu, C. Yang, M. Yoon, and G. Zhou, “Sideband Suppression in Tapered Free Electron Lasers”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 80-83. doi:10.18429/JACoW-FEL2017-MOP021
[n] J.-P. Koutchouk and F. Zimmermann, “LHC Upgrade Scenarios”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1PBI03, pp. 4225-4229.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Pierini, A. Bosotti, R. Paparella, D. Sertore, and E. Vogel, “Fabrication Experience of the Third Harmonic Superconducting Cavity Prototypes for the XFEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP033, pp. 2064-2066.
- J. J. Petillo, A. J. Dudas, and M. E. Read, “Sheet Electron Beam Gun Design Using ARGUS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 888-891.
- E. Arevalo, W. Ackermann, R. Hampel, W. F. O. Muller, and T. Weiland, “Wake Field Computations for the PITZ Photoinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN016, pp. 3931-3933.
- R. B. Deng, Y. Liu, L. Wang, and S. Xiang, “Vibration Measurements of Super-Conducting Undulator at SSRF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1675-1677.
- P. A. Seidl and J.-L. Vay, “Formation of High Charge State Heavy Ion Beams with Intense Space Charge”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP098, pp. 1657-1658.
- B. Farnham, “Automated testing of OPC Servers”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS006, pp. 985-988.
- J. Branlard et al., “RF Operation Experience at the European XFEL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 109-111.
- C. H. Kuo, J. Chen, K. T. Hsu, and K. H. Hu, “Functionality of the Digital Beam Position Monitor Test-Bed in NSRRC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB067, pp. 2557-2559.
- I. Hofmann, G. Franchetti, J. Qiang, and R. D. Ryne, “Dynamical Effects of the Montague Resonance”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT053, pp. 1960-1962.
- Z. G. Zong et al., “Tests on the 1.3 GHz Low Loss Single-Cell RF Superconducting Large Grain Cavities of IHEP”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP168, pp. 943-945.
- J. Kemppinen, Z. S. Kostka, and H. Mainaud Durand, “Cam Mover Alignment System Positioning with Wire Position Sensor Feedback for CLIC”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 32-34.
- U. R. Ristau, M. DiCastro, P. Duval, S. Fiedler, and A. Pazos, “The Concept of EMBL Beamline Control at Petra III”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOZ02, pp. 22-24.
- T. Olsson, R. Bartolini, and I. P. S. Martin, “Harmonic Cavity Design Choice for Lifetime Increase in Diamond-II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1585-1588.
- A. Schnase et al., “Control Loops for the J-PARC RCS Digital Low-Level RF Control”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT007, pp. 1063-1065.
- V. Grishin et al., “A Family of Gas Ionization Chambers and SEM for Beam Loss Monitoring of LHC and Other Accelerators”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 44-48.
- V. Kamerdzhiev, V. A. Lebedev, and A. Semenov, “Towards Routine Operation of the Digital Tune Monitor in the Tevatron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC044, pp. 1155-1157.
- R. Secondo, J.-L. Vay, M. Venturini, J. D. Fox, C. H. Rivetta, and W. H?Âfle, “Simulation Results of a Feedback Control System to Damp Electron Cloud Single-Bunch Transverse Instabilities in the CERN SPS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP153, pp. 1773-1775.
- M. Brameld et al., “Evaluation of Coherent Terahertz Radiation Generated from Tilted Electron Beams Aiming for Higher Light Intensity”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4642-4644.
- M. Lechartier, D. Besnier, J. F. Leyge, and M. Michel, “Design of the MEBT Rebunchers for the SPIRAL 2 Driver”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper C-09, pp. 278-281.
- E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
- G. Vanbavinckhove, M. Aiba, R. Calaga, and R. Tom?ís, “Coupling and Vertical Dispersion Correction studies for the LHC using Skew Quadrupoles and Vertical Orbit Bumps”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE025, pp. 4569-4571.
- T. Koseki et al., “Quadrupole and Sextupole Magnets for the Super SOR Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE065, pp. 2355-2357.
- Y. Zou, Y. Cui, I. Haber, P. G. O, and M. Reiser, “Longitudinal Space-Charge Effects in a Retarding Field Energy Analyzer”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB005, pp. 511-513.
- Y. Hashimoto, T. Toyama, T. M. Mitsuhashi, M. Tejima, and S. Otsu, “A Development of High Sensitive Beam Profile Monitor using Multi-Screen”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUCL2, pp. 338-341.
- D. G. Kim, H.-C. Bhang, J.-W. Kim, J. Y. Kim, and C. C. Yun, “Study on the Injection System for Compact Cyclotron Mass Spectrometry”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA019, pp. 106-108.
- B. W. J. McNeil and N. Thompson, “Mode Locked Optical Klystron Configuration in an FEL Cavity Resonator”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THOB4, pp. 558-561.
- S. Aytac, “Redesign of Alarm Monitoring System Application BeamlineAlarminfoClient" at DESY"”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO029, pp. 216-218.
- A. Stecchi et al., “!CHAOS General Status Report”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 17-21.
- S. Yu. Taskaev et al., “VITA Based Neutron Source - Status and Prospects”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRBCH04, pp. 230-232.
- E. Yamakawa, Y. Ishi, Y. Kuriyama, J.-B. Lagrange, Y. Mori, and T. Uesugi, “High Intensity Proton FFAG Ring with Serpentine Acceleration for ADS”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP209, pp. 60-63.
- F. R. Osswald, T. Adam, P. G. Graehling, M. Heine, C. Maazouzi, and E. K. Traykov, “Transverse Phase Space Scanner Developments at IPHC”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 293-296.
- R. Varela et al., “Beam Induced Fluorescence Measurements of 100 keV Deuterons in LIPAc Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1877-1880.
- Y. C. Yu et al., “Study on the Influence of the Range Shifter Material in a Scanning Nozzle for Proton Therapy Based on Monte Carlo Method”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4100-4102.
- Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX.
- R. Nagaoka and L. Farvacque, “Analysis and Correction of Optical Asymmetry at the ESRF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE013, pp. 1166-1168.
- P. Leban, G. Brajnik, and R. De Monte, “Evaluation of Pilot-Tone Calibration Based BPM System at Elettra Sincrotrone Trieste”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2638-2640.
- T. Zhang, S. Ninomiya, K. Sato, S. Morioka, H. Saito, and Y. Sasaki, “Development for Large Dynamical Field Range,Wide Good Field Region C-Magnet”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH153, pp. 3603-3605.
- N. Dobeck et al., “Precision, 32 Channel Power Supply System”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU465, pp. 490-492.
- P. Matthews, Y. Kang, and R. Kustom, “Storage Ring Cavity Higher-Order Mode Dampers for the Advanced Photon Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPP12, pp. 1684-1686.
- K. Gubin et al., “Tests of High Temperature Intense Neutron Target Prototype.”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUBZ03, pp. XX-XX.
- I. Syrachev, V. F. Vogel, H. Mizuno, J. Odagiri, Y. Otake, and S. Tokumoto, “The Results of RF High Power Tests of X-Band Open Cavity RF Pulse Compression System VPM(JLC)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-49, pp. 475-477.
- M. H. Foss, R. J. Lari, J. Simpson, and K. Thompson, “The Design of the Zero Gradient Synchrotron Booster II Ring Magnet”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1613-1617.
- P. Bertrand, “Longitudinal Resonances and Emittance Growth Using QWR/HWR in a Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT071, pp. 2014-2016.
- S. Tsujino et al., “Development of All-metal Stacked-double Gate Field Emitter Array Cathodes for X-ray Free-electron Laser Applications”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP041, pp. 811-814.
- M. K. Craddock, “Kaon Factories”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 1993-1998.
- M. J. Bajard, “Status of the Hadrontherapy ETOILE-Project in Lyon”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH158, pp. 2299-2301.
- D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 124-127.
- J. Ozelis, “Performance of Medium-Beta Elliptical Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOP07, pp. 133-133.
- T. Hori, Y. Mikami, T. Takayama, and S. Yamada, “Operation Results of Compact SR Ring AURORA-2D with 7 Tesla Wiggler”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP10G, pp. 581-583.
- B. Balhan et al., “Modification of the LEP Electrostatic Separator Systems for Operation with Bunch Trains”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA15, pp. 557-559.
- D. Gex et al., “Engineering Issues of the Medium Energy Beam Transport Line and SRF Linac for the LIPAc”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2377-2379.
- R. Bacher et al., “The HERA Quench Protection System - A Status Report”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP039G, pp. 2264-2266.
- C.-Y. Tsai, J. Wu, C. Yang, M. Yoon, and G. Zhou, “Sideband Suppression in Tapered Free Electron Lasers”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 80-83.
- J.-P. Koutchouk and F. Zimmermann, “LHC Upgrade Scenarios”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR1PBI03, pp. 4225-4229.
Back to search