JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. H. Maclean, T. Persson, and R. Tomas, “Amplitude Dependent Closest Tune Approach Generated by Normal and Skew Octupoles”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3147-3150. doi:10.18429/JACoW-IPAC2017-WEPIK091
[n]	D. Gonnella and M. Liepe, “High Q0 Studies at Cornell”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP027, pp. 478-482. 
[n]	E. W. Vogt and J. R. Richardson, “An H- Meson Facility”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper E-001, pp. XX-XX. 
[n]	C. A. Swenson, Y. Huang, F. R. Huson, and R. Rocha, “Status of Compact Synchrotron Light Source Work at TAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2649-2652. 
[n]	C. E. Adolphsen, K. L. F. Bane, W. L. Spence, and M. D. Woodley, “Collective Centroid Oscillations as an Emittance Preservation Diagnostic in Linear Collider Linacs”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5V036, pp. 1673-1675. 
[n]	E. Forton et al., “Structural and Magnetic Properties of Cast Iron for Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU4PB02, pp. 275-277. 
[n]	D. Gonnella, F. Furuta, and M. Liepe, “Heat Treatment of SRF Cavities in a Low-Pressure Atmosphere”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP029, pp. 487-489. 
[n]	P. W. Schmor, “A Review of Polarized Ion Sources for Cyclotrons (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-04, pp. 316-321. 
[n]	D. Shuman, A. Faltens, M. Kireeff Covo, G. Ritchie, and P. A. Seidl, “A Compact High Gradient Pulsed Magnetic Quadrupole”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT068, pp. 3771-3773. 
[n]	J. E. Spencer et al., “Beam Dynamics Measurements for the SLAC Laser Acceleration Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS055, pp. 3115-3117. 
[n]	H. J. Kwon, Y. S. Cho, J. M. Han, and B. H. Choi, “RF System for KOMAC RFQ”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH454, pp. 725-727. 
[n]	S. Eylon, E. Henestroza, J.-S. Kim, T. L. Houck, G. A. Westenskow, and S. S. Yu, “Longitudinal Impedance Measurements of an RK-TBA Induction Accelerating Gap”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P046, pp. 3719-3721. 
[n]	Y. Xu and R. Seviour, “Design of Photonic Crystal Klystrons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB057, pp. 4002-4004. 
[n]	D. A. Dimitrov et al., “Modeling of Diamond Based Devices for Beam Diagnostics”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP162, pp. 1794-1796. 
[n]	Q. Wu and I. Ben-Zvi, “Optimization of Higher Order Mode Dampers in the 56 MHz SRF Cavity for RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC086, pp. 3081-3083. 
[n]	S. Machida, “A Fixed Field Alternating Gradient Accelerator With Long Straight Sections”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC044, pp. 558-560. 
[n]	V. Volkov et al., “Nuclotron Extracted Beam Spill Control”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT095, pp. 2718-2720. 
[n]	W. Scandale, “Non-Linear Single Particle Beam Dynamics in Circular Machines”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 264-269. 
[n]	I. S. K. Gardner, “A Review of Spallation Neutron Source Accelerators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUX03B, pp. 98-102. 
[n]	D. E. Johnson, “The Bzero Low-Beta Insertion Design for the Tevatron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1672-1675. 
[n]	Y. Yang et al., “Study Progress of Pulse Laser Annealing for Niobium Film on Copper”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 438-441. doi:10.18429/JACoW-LINAC2018-TUPO048
[n]	Y. I. Eidelman, S. Nagaitsev, and N. Solyak, “SCREAMm ÔÇô Modified Code SCREAM to Simulate the Acceleration of a Pulsed Beam Through the Superconducting Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO066, pp. 258-261. 
[n]	D. Trbojevic, C. Ankenbrandt, and I. Kourbanis, “Modification of the Horizontal Dispersion in the Fermilab Main Ring with Additional Quadrupoles”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 99-102. 
[n]	Y. I. Eidelman, N. V. Mokhov, S. Nagaitsev, and N. Solyak, “A New Approach to Calculate the Transport Matrix in RF cavities”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP131, pp. 1725-1727. 
[n]	F. Antoniou et al., “Optics Design Optimization for IBS Dominated Beams”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1B02, pp. 386-390. 
[n]	S. Redaelli et al., “The Online Model for the Large Hadron Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC011, pp. 480-482. 
[n]	D. E. Johnson and M. Xiao, “The Concept Design of a New Transfer Line from Booster to Recycler for the Fermilab Proton Plan Phase 2 Campaign”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS038, pp. 1727-1729. 
[n]	C. Montag, D. Bruno, A. K. Jain, G. Robert-Demolaize, T. Satogata, and S. Tepikian, “Mimicking Bipolar Sextupole Power Supplies for Low-energy Operations at RHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP061, pp. 2241-2242. 
[n]	E. Schneidmiller and M. V. Yurkov, “Coherence Properties of the Odd Harmonics of the Radiation from SASE FEL with Planar Undulator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD08, pp. 65-68. 
[n]	N. Inabe and T. Katayama, “Design of Double Storage Rings at MUSES”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP036L, pp. 926-928. 
[n]	N. Liu et al., “Development Status of RF Reference Phase Stabilization System for SuperKEKB Injector LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3879-3881. doi:10.18429/JACoW-IPAC2019-THPRB033
[n]	S. De Santis, A. Aryshev, J. M. Byrd, T. Naito, M. C. Ross, and J. Urakawa, “Coherent Synchrotron Radiation Studies at the Accelerator Test Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH067, pp. 2940-2942. 
[n]	P. Echevarria, J. Knobloch, A. Neumann, A. Ushakov, E. Aldekoa, and J. Jugo, “SRF Cavity Simulator for LLRF Algorithms Debugging”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2118-2120. doi:10.18429/JACoW-IPAC2018-WEPAK013
[n]	J.-B. Lallement, “Experience with the Construction and Commissioning of Linac4”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 342-347. doi:10.18429/JACoW-LINAC2016-TU1A03
[n]	Y. Alexahin et al., “Low Emittances Lattices for LEP”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B008, pp. 312-314. 
[n]	R. Xiang et al., “Runing Status of SRF Gun II at the ELBE Radiation Center”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 952-954. doi:10.18429/JACoW-LINAC2018-THPO125
[n]	L. Lilje et al., “Electropolishing and in-situ Baking of 1.3 GHz Niobium Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUA001, pp. 74-76. 
[n]	A. Seibel, C. M. Kleffner, K. Knie, U. Ratzinger, and M. Vossberg, “Comparison Between Measurement and Simulation of a Full Scale Prototype for the Proton Injector at FAIR”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 940-942. doi:10.18429/JACoW-IPAC2019-MOPTS037
[n]	D. Kostin, W.-D. Moeller, and W. Kaabi, “Update on the European XFEL RF Power Input Coupler”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP058, pp. 1047-1050. 
[n]	S. Ramberger and S. Russenschuck, “Genetic Algorithms for the Optimal Design of Superconducting Accelerator Magnets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP10H, pp. 2014-2016. 
[n]	R. Becker et al., “Matching of a C6+ Ion Beam from a Laser Ion Source to a RFQ”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT025, pp. 1195-1197. 
[n]	P. Plutecki, B. Bielawski, and A. C. Butterworth, “Code Generation Tools and Editor for Memory Maps”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 494. doi:10.18429/JACoW-ICALEPCS2019-MOPHA115
[n]	S. Barbanotti et al., “Status of the Mechanical Design of the 650 MHz Cavities for Project X”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP069, pp. 943-945. 
[n]	A. Hocker, E. Cullerton, B. M. Hanna, W. Schappert, and A. I. Sukhanov, “RF Tests of Dressed 325 MHz Single-Spoke Resonators at 2 K”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP055, pp. 180-182. 
[n]	G. Corso and R. Pakter, “Improving Regular Acceleration in the Nonlinear Interaction of Particles and Waves”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP056G, pp. 1391-1393. 
[n]	C. Burandt, U. Bonnes, J. Enders, F. Hug, M. Konrad, and N. Pietralla, “Status of the Migration of the S-DALINAC Accelerator Control System to EPICS”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD14, pp. 166-168. 
[n]	C. Burandt, U. Bonnes, J. Enders, M. Konrad, and N. Pietralla, “SocketCAN Device Support for EPICS IOCs”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD13, pp. 163-165. 
[n]	C. Cheng, J. S. Duo, J. Li, J. Lv, and S. X. Zheng, “HOM Characteristics Measurement of Mini-LIA Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA025, pp. 3732-3734. 
[n]	V. Miltchev et al., “Measurements of Thermal Emittance for Cesium Telluride Photocathodes at PITZ”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP042, pp. XX-XX. 
[n]	J. C. Gallardo et al., “New and Efficient Neutrino Factory Front-End Design”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP047, pp. 2986-2988. 
[n]	S. Marks, K. Kennedy, D. W. Plate, D. Schlueter, and M. S. Zisman, “Conceptual Design of ILC Damping Ring Wiggler Straight Vacuum System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS025, pp. 488-490. 
[n]	H. Reeg and N. Schneider Gesellschaft f??r Schwerionenforschung, “Current Transformers for GSI's KeV/u to GeV/u Ion Beams - An Overview”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS08, pp. XX-XX. 
[n]	H. Bluem, M. D. Cole, J. H. Billen, L. M. Young, and P. Greninger, “Measurements on the Frequency Effects and Coupling of Slots and Irises for the APT CCDTL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA78, pp. 3570-3572. 
[n]	K. Asano et al., “Challenge to a Straight Structure for X-Band Linear Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA16, pp. 3417-3419. 
[n]	N. Inabe, T. Katayama, and M. Wakasugi, “Simulation study of Stochastic Cooling for ACR at RIKEN MUSES”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B16, pp. 1274-1276. 
[n]	W. R. Rawnsley, R. E. Laxdal, and A. K. Mitra, “A Non-intercepting Beam Current Monitor for the ISAC-II SC-linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN007, pp. 155-157. 
[n]	Y. Tanimoto, Y. Hori, T. Nogami, and T. Uchiyama, “Vacuum Systems Renewal for the PF-AR Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE030, pp. 809-811. 
[n]	Y. Ogawa, A. Asami, and T. Shidara, “Experimental Investigations of Multi-Bunch Instability by a Transverse Wake Field”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH465, pp. 773-775. 
[n]	D. Kostin, W.-D. Moeller, and J. K. Sekutowicz, “HOM Coupler Design Adjustment for CW operation of the 1.3 GHz 9-cell TESLA Type SRF Cavity”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP059, pp. 1051-1054. 
[n]	W. Herr, “MOPS - A Data Structure Management System for the LEP/SPS Control System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1713-1716. 
[n]	N. Yamamoto, S. Sakanaka, and T. Takahashi, “Simulation Study of Parasitic-Mode Damping Methods for a 1.5-GHz TM020-Mode Harmonic Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2822-2825. doi:10.18429/JACoW-IPAC2018-WEPML055

For LaTeX

Use Complete Form

For BibTeX

References

Back to search