Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Yamamoto et al., “Longitudinal Emittance Control and Beam Loading Effects on Proton Synchrotrons in JAERI-KEK Joint Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH030, pp. 2917-2919.
[n] E. F. Holik et al., “Current Progress of TAMU3: A Block Coil Stress-managed High Field (>12T) Nb3Sn Dipole”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP178, pp. 1163-1165.
[n] F. Ruggiero, “A Review of New Manifestations of Collective Effects”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THX01A, pp. 18-22.
[n] L. B. Hu et al., “Simulation of Cryogenic Process and Control of EAST Based on EPICS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1024-1027. doi:10.18429/JACoW-ICALEPCS2017-WEAPL03
[n] Y. K. Wu, J. Li, V. Litvinenko, and P. Wang, “BPM and Orbit Correction Systems at the Duke Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB032, pp. 2479-2481.
[n] H. Okamoto, “Frozen Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAD001, pp. 4-8.
[n] L. Zhou, M. Zhang, Z. Luo, Q. Yu, D. Kong, and J. Qiao, “Preliminary Design of a Dedicated Proton Therapy Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D046, pp. 785-786.
[n] R. J. Yang et al., “Development of a a YAG/OTR Monitor”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 429-433. doi:10.18429/JACoW-IBIC2018-WEPB02
[n] W. Ma, Y. He, L. Lu, X. B. Xu, Z. L. Zhang, and H. W. Zhao, “Design Study on an Injector RFQ for Heavy Ion Accelerator Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 928-931. doi:10.18429/JACoW-IPAC2016-MOPOY033
[n] C. C. Liang et al., “The Protection Instrument for Cryogenic Phase Separator Pressure Relief Valve of TPS Beamline”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1350-1352. doi:10.18429/JACoW-IPAC2019-TUPMP045
[n] H. J. Cha, H. Kim, H. J. Kim, W. K. Kim, and G.-T. Park, “Prototyping Progress of SSR1 Single Spoke Resonator for RAON”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3842-3844. doi:10.18429/JACoW-IPAC2015-THPF070
[n] S. M. Lund, L. Wang, and B. R. Poole, “Dipole Septum Magnet in the Fast Kicker System for Multi-Axis Advanced Radiography”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC08, pp. 506-508.
[n] J. Qiang and M. Blaskiewicz, “Combined wakefield and beam-beam effects in the EIC design”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3198-3201. doi:10.18429/JACoW-IPAC2024-THPC73
[n] K. A. Thompson, T. Himel, S. Moore, L. Sanchez-Chopitea, and H. Shoaee, “Operational Experience with Model-Based Steering in the SLC Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1675-1678.
[n] T. Oki, T. Adachi, S. Nakamura, N. Ohuchi, and N. Tokuda, “Prototype Power Supply for SuperKEKB Final Focus Superconducting Corrector Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3537-3539. doi:10.18429/JACoW-IPAC2016-THPMW003
[n] M. Masuzawa and K. Egawa, “Preliminary Results of Magnet Measurements for the KEK B-Factory Quadrupole Magnets”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D070, pp. 570-572.
[n] C. S. Chen and Z.-D. Tsai, “The FPGA-based Power Monitoring System for TPS Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA048, pp. 3252-3254.
[n] L. Sanchez-Chopitea, P. Emma, and D. Van Olst, “Orbit Monitoring in the SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1284-1287.
[n] J.-C. Chang et al., “Power Saving Status in the NSRRC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI069, pp. 3457-3459.
[n] T. Koseki, Y. Kobayashi, H. Takaki, N. Nakamura, Y. Kamiya, and K. Kuno, “The Magnets of the VSX Light Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D067, pp. 564-566.
[n] D. M. Harryman, T. Lef?¿vre, N. Mounet, and A. Schloegelhofer, “Simulation of Cherenkov Diffraction Radiation for Various Radiator Designs”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 73-77. doi:10.18429/JACoW-IBIC2020-TUPP28
[n] C. Ohmori et al., “New Cutting Scheme of Magnetic Alloy Cores for J-PARC Synchrotrons”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH128, pp. 1313-1315.
[n] O. J. Luiten and M. J. Van der Wiel, “Compact, Ultra-Bright Coherent Transition Radiation Terahertz Source”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP052, pp. XX-XX.
[n] T. J. Bian et al., “Design study of CEPC Booster”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 79-84. doi:10.18429/JACoW-eeFACT2016-TUT2H3
[n] Y. Liu et al., “Laser System Design and Operation for SNS H- Beam Laser Stripping”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 57-59. doi:10.18429/JACoW-IPAC2017-MOOCB2
[n] F. A. DePaola, C. Amundsen, and S. K. Sharma, “Manufacturing of Photon Beam-Intercepting Components from CuCrZr”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 233-235. doi:10.18429/JACoW-MEDSI2016-TUPE31
For LaTeX
Use Complete Form
For BibTeX
References
- M. Yamamoto et al., “Longitudinal Emittance Control and Beam Loading Effects on Proton Synchrotrons in JAERI-KEK Joint Project”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH030, pp. 2917-2919.
- E. F. Holik et al., “Current Progress of TAMU3: A Block Coil Stress-managed High Field (>12T) Nb3Sn Dipole”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP178, pp. 1163-1165.
- F. Ruggiero, “A Review of New Manifestations of Collective Effects”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THX01A, pp. 18-22.
- L. B. Hu et al., “Simulation of Cryogenic Process and Control of EAST Based on EPICS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1024-1027.
- Y. K. Wu, J. Li, V. Litvinenko, and P. Wang, “BPM and Orbit Correction Systems at the Duke Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB032, pp. 2479-2481.
- H. Okamoto, “Frozen Beams”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAD001, pp. 4-8.
- L. Zhou, M. Zhang, Z. Luo, Q. Yu, D. Kong, and J. Qiao, “Preliminary Design of a Dedicated Proton Therapy Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D046, pp. 785-786.
- R. J. Yang et al., “Development of a a YAG/OTR Monitor”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 429-433.
- W. Ma, Y. He, L. Lu, X. B. Xu, Z. L. Zhang, and H. W. Zhao, “Design Study on an Injector RFQ for Heavy Ion Accelerator Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 928-931.
- C. C. Liang et al., “The Protection Instrument for Cryogenic Phase Separator Pressure Relief Valve of TPS Beamline”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1350-1352.
- H. J. Cha, H. Kim, H. J. Kim, W. K. Kim, and G.-T. Park, “Prototyping Progress of SSR1 Single Spoke Resonator for RAON”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3842-3844.
- S. M. Lund, L. Wang, and B. R. Poole, “Dipole Septum Magnet in the Fast Kicker System for Multi-Axis Advanced Radiography”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUC08, pp. 506-508.
- J. Qiang and M. Blaskiewicz, “Combined wakefield and beam-beam effects in the EIC design”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC73, pp. 3198-3201.
- K. A. Thompson, T. Himel, S. Moore, L. Sanchez-Chopitea, and H. Shoaee, “Operational Experience with Model-Based Steering in the SLC Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1675-1678.
- T. Oki, T. Adachi, S. Nakamura, N. Ohuchi, and N. Tokuda, “Prototype Power Supply for SuperKEKB Final Focus Superconducting Corrector Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3537-3539.
- M. Masuzawa and K. Egawa, “Preliminary Results of Magnet Measurements for the KEK B-Factory Quadrupole Magnets”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D070, pp. 570-572.
- C. S. Chen and Z.-D. Tsai, “The FPGA-based Power Monitoring System for TPS Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA048, pp. 3252-3254.
- L. Sanchez-Chopitea, P. Emma, and D. Van Olst, “Orbit Monitoring in the SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1284-1287.
- J.-C. Chang et al., “Power Saving Status in the NSRRC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI069, pp. 3457-3459.
- T. Koseki, Y. Kobayashi, H. Takaki, N. Nakamura, Y. Kamiya, and K. Kuno, “The Magnets of the VSX Light Source”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D067, pp. 564-566.
- D. M. Harryman, T. Lef?¿vre, N. Mounet, and A. Schloegelhofer, “Simulation of Cherenkov Diffraction Radiation for Various Radiator Designs”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 73-77.
- C. Ohmori et al., “New Cutting Scheme of Magnetic Alloy Cores for J-PARC Synchrotrons”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH128, pp. 1313-1315.
- O. J. Luiten and M. J. Van der Wiel, “Compact, Ultra-Bright Coherent Transition Radiation Terahertz Source”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP052, pp. XX-XX.
- T. J. Bian et al., “Design study of CEPC Booster”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 79-84.
- Y. Liu et al., “Laser System Design and Operation for SNS H- Beam Laser Stripping”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 57-59.
- F. A. DePaola, C. Amundsen, and S. K. Sharma, “Manufacturing of Photon Beam-Intercepting Components from CuCrZr”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 233-235.
Back to search