Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. I. Bell et al., “Simulations of Diamond Detectors with Schottky Contacts”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 617-619. doi:10.18429/JACoW-IPAC2015-MOPMA031
[n] E. Cano Vargas et al., “Timing Stability Comparison Study of RF Synthesis Techniques”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 325-327. doi:10.18429/JACoW-FEL2019-WEP004
[n] J. M. Cesaratto et al., “A Wideband Slotted Kicker Design for SPS Transverse Intra-bunch Feedback”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME061, pp. 3073-3075.
[n] H.-G. Lee et al., “Technical Overview of Bunch Compressor System for PAL XFEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3018-3020. doi:10.18429/JACoW-IPAC2015-WEPMN041
[n] C. M. Miao, T. M. Antonsen, and J. Palastro, “Simulation of Laser Pulse Driven Terahertz Generation in Inhomogeneous Plasmas”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2661-2663. doi:10.18429/JACoW-IPAC2015-WEPWA068
[n] S. G. Tantawi, R. D. Ruth, and P. B. Wilson, “A Comparison Between Pulse Compression Options for NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAL3, pp. 423-425.
[n] S. P. Antipov et al., “Progress on Multipactor Studies in Dielectric-Loaded Accelerating Structures”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP115, pp. 310-312.
[n] T. Vinatier, R. W. Assmann, U. Dorda, and B. Marchetti, “Development of a Focusing System for the AXSIS Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 203-206. doi:10.18429/JACoW-IPAC2017-MOPAB049
[n] A. M. Barbour, “How Data Technology and Computational Power Are Advancing X-Ray Synchrotron Science”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper FRKPP01, pp. XX-XX.
[n] K. Bongardt, “Design Study of a High Current Proton Beam Funneling Line”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0023, pp. 389-391.
[n] J. S. Berg, “Linear Model for Non-Isosceles Absorbers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB074, pp. 2210-2212.
[n] R. Merte, H. Henke, M. Peikert, and D. Yu, “Development and Test of a Planar R-band Accelerating Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP65, pp. 815-817.
[n] R. Zeng, D. P. McGinnis, S. Molloy, and A. J. Johansson, “Investigation of Feedback Control for Klystron Ripple”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC083, pp. 3479-3481.
[n] W. Merz and H. Pfeffer, “The Fermilab Dzero Overpass Power Supply System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3763-3766.
[n] A. I. Dzergach, “About the Possibility of Storage and Acceleration of Ribbon Beams in Ring Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 826-828.
[n] T. Higo et al., “High Field Experiment of 1.3m-Long X-Band Structure”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D034, pp. 169-171.
[n] R. G. Heine, K. Aulenbacher, and R. Eichhorn, “MESA - Sketch of an Energy Recovery Linac for Nuclear Physics Experiments at Mainz”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR073, pp. 1993-1995.
[n] R. Merte, H. Henke, and R. Apel, “Design, Fabrication and RF Measurement of a W-band Accelerating Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP66, pp. 818-820.
[n] R. Zeng, D. P. McGinnis, S. Molloy, and A. J. Johansson, “Control Performance Improvement by Using Feedforward in LLRF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC082, pp. 3476-3478.
[n] N. Elias, C. Darve, J. Fydrych, A. Nordt, and D. P. Piso, “Preliminary Functional Analysis and Operating Modes of ESS 704 MHz Superconducting Radio-Frequency Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3317-3319. doi:10.18429/JACoW-IPAC2014-THPME042
[n] H.-G. Lee et al., “Design and Fabrication of Bunch Compressor Support System for PAL XFEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4022-4024. doi:10.18429/JACoW-IPAC2014-THPRI104
[n] J. L. Abelleira, S. Russenschuck, F. Zimmermann, C. Milardi, and M. Zobov, “LHC Optics with Crab-waist Collisions and Local Chromatic Correction”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI044, pp. 1448-1450.
[n] D. Trbojevic, J. S. Berg, M. Blaskiewicz, E. D. Courant, A. A. Garren, and R. Palmer, “FFAG Lattice for Muon Acceleration with Distributed RF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG003, pp. 1816-1818.
[n] M. E. Angoletta et al., “Operational Experience With the New Digital Low-Level RF System for CERN's PS Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4058-4061. doi:10.18429/JACoW-IPAC2017-THPAB143
[n] R. Stassen, K. Bongardt, F. J. Etzkorn, A. Schnase, and H. Stockhorst, “The HESR RF-system and Tests in COSY”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC125, pp. 361-363.
[n] K.-H. Park et al., “The Magnet Power Supply for PAL-XFEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 504-507. doi:10.18429/JACoW-IPAC2014-MOPME058
[n] T. Vinatier, R. W. Assmann, U. Dorda, and B. Marchetti, “Simulation of fs Bunch Length Determination with the 3-Phase Method and THz Dielectric Loaded Waveguides”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 199-202. doi:10.18429/JACoW-IPAC2017-MOPAB048
For LaTeX
Use Complete Form
For BibTeX
References
- G. I. Bell et al., “Simulations of Diamond Detectors with Schottky Contacts”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 617-619.
- E. Cano Vargas et al., “Timing Stability Comparison Study of RF Synthesis Techniques”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 325-327.
- J. M. Cesaratto et al., “A Wideband Slotted Kicker Design for SPS Transverse Intra-bunch Feedback”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME061, pp. 3073-3075.
- H.-G. Lee et al., “Technical Overview of Bunch Compressor System for PAL XFEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3018-3020.
- C. M. Miao, T. M. Antonsen, and J. Palastro, “Simulation of Laser Pulse Driven Terahertz Generation in Inhomogeneous Plasmas”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2661-2663.
- S. G. Tantawi, R. D. Ruth, and P. B. Wilson, “A Comparison Between Pulse Compression Options for NLC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THAL3, pp. 423-425.
- S. P. Antipov et al., “Progress on Multipactor Studies in Dielectric-Loaded Accelerating Structures”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP115, pp. 310-312.
- T. Vinatier, R. W. Assmann, U. Dorda, and B. Marchetti, “Development of a Focusing System for the AXSIS Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 203-206.
- A. M. Barbour, “How Data Technology and Computational Power Are Advancing X-Ray Synchrotron Science”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper FRKPP01, pp. XX-XX.
- K. Bongardt, “Design Study of a High Current Proton Beam Funneling Line”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0023, pp. 389-391.
- J. S. Berg, “Linear Model for Non-Isosceles Absorbers”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB074, pp. 2210-2212.
- R. Merte, H. Henke, M. Peikert, and D. Yu, “Development and Test of a Planar R-band Accelerating Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP65, pp. 815-817.
- R. Zeng, D. P. McGinnis, S. Molloy, and A. J. Johansson, “Investigation of Feedback Control for Klystron Ripple”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC083, pp. 3479-3481.
- W. Merz and H. Pfeffer, “The Fermilab Dzero Overpass Power Supply System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3763-3766.
- A. I. Dzergach, “About the Possibility of Storage and Acceleration of Ribbon Beams in Ring Magnets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 826-828.
- T. Higo et al., “High Field Experiment of 1.3m-Long X-Band Structure”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D034, pp. 169-171.
- R. G. Heine, K. Aulenbacher, and R. Eichhorn, “MESA - Sketch of an Energy Recovery Linac for Nuclear Physics Experiments at Mainz”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR073, pp. 1993-1995.
- R. Merte, H. Henke, and R. Apel, “Design, Fabrication and RF Measurement of a W-band Accelerating Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP66, pp. 818-820.
- R. Zeng, D. P. McGinnis, S. Molloy, and A. J. Johansson, “Control Performance Improvement by Using Feedforward in LLRF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC082, pp. 3476-3478.
- N. Elias, C. Darve, J. Fydrych, A. Nordt, and D. P. Piso, “Preliminary Functional Analysis and Operating Modes of ESS 704 MHz Superconducting Radio-Frequency Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3317-3319.
- H.-G. Lee et al., “Design and Fabrication of Bunch Compressor Support System for PAL XFEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4022-4024.
- J. L. Abelleira, S. Russenschuck, F. Zimmermann, C. Milardi, and M. Zobov, “LHC Optics with Crab-waist Collisions and Local Chromatic Correction”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI044, pp. 1448-1450.
- D. Trbojevic, J. S. Berg, M. Blaskiewicz, E. D. Courant, A. A. Garren, and R. Palmer, “FFAG Lattice for Muon Acceleration with Distributed RF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG003, pp. 1816-1818.
- M. E. Angoletta et al., “Operational Experience With the New Digital Low-Level RF System for CERN's PS Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4058-4061.
- R. Stassen, K. Bongardt, F. J. Etzkorn, A. Schnase, and H. Stockhorst, “The HESR RF-system and Tests in COSY”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC125, pp. 361-363.
- K.-H. Park et al., “The Magnet Power Supply for PAL-XFEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 504-507.
- T. Vinatier, R. W. Assmann, U. Dorda, and B. Marchetti, “Simulation of fs Bunch Length Determination with the 3-Phase Method and THz Dielectric Loaded Waveguides”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 199-202.
Back to search