Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Checchin, A. Grassellino, M. Martinello, S. Posen, A. Romanenko, and J. Zasadzinski, “Ultimate Gradient Limitation in Niobium Superconducting Accelerating Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2254-2257. doi:10.18429/JACoW-IPAC2016-WEPMR002
[n] M. Krasilnikov, J. W. Baehr, M. H?ñnel, F. Stephan, and I. Will, “Experimental Optimization of the Cathode Laser Temporal Profile”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB29, pp. 135-137.
[n] D. R. Anderson et al., “Design of a 6 MeV Electron Cooling System for the SSC Medium Energy Booster”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 836-839.
[n] Q. Xia, L. Zheng, and Y. Du, “Experimental design for validating the feasibility of in-situ plasma cleaning of normal conducting copper cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3901-3903. doi:10.18429/JACoW-IPAC2024-THPS66
[n] D. Reschke, “Basic Studies for Process Parameter Developmenst for EP/HPR/Snow Cleaning”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOAAU02, pp. 462-462.
[n] M. Thieme, W. Panschow, S. Rauch, and M. Zweig, “Single Board Computer for Device Control in the FAIR Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP060, pp. XX-XX.
[n] F. M. Liu et al., “Drive Laser System for the DC-SRF Photoinjector at Peking University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4076-4078. doi:10.18429/JACoW-IPAC2016-THPOW058
[n] J. Jiang, H. B. Chen, J. Shi, and P. Wang, “A C-band Deflecting Cavity Design for High-precision Bunch Length Measurement”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2948-2951. doi:10.18429/JACoW-IPAC2015-WEPMN014
[n] F. Eoz?®nou, C. Z. Antoine, S. Berry, J.-P. Charrier, Y. Gasser, and D. Reschke, “Low-Voltage Electro-Polishing of SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO070, pp. 781-785.
[n] Y. W. An and S. Wang, “Application of Orbit Response Matrix Method at CSNS/RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS011, pp. 2505-2507.
[n] P. Bernard et al., “Status Report of the Superconducting 5-Cell Acceleration Structure at CERN”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3342-3345.
[n] W. Chou and Y. Jin, “Impedance Calculations for 2-D and 3-D Structures and the Impedance Budget of 7-GeV APS Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 909-912.
[n] B. Tang, Q. S. Chen, T. Hu, J. Jiang, and Y. Q. Xiong, “Main Control System of the Linear Accelerator for the HUST THz-FEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1858-1860. doi:10.18429/JACoW-IPAC2017-TUPIK070
[n] E. Pozdeyev et al., “Beam Commissioning and Integrated Test of the PIP-II Injector Test Facility”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 13-17. doi:10.18429/JACoW-LINAC2022-MO1PA01
[n] Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 246-249. doi:10.18429/JACoW-LINAC2018-MOPO119
[n] C. H. Chen et al., “A Compact, Wavelength Tunable MW-THz FEL Amplifier”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 789-792. doi:10.18429/JACoW-IPAC2016-MOPOW035
For LaTeX
Use Complete Form
For BibTeX
References
- M. Checchin, A. Grassellino, M. Martinello, S. Posen, A. Romanenko, and J. Zasadzinski, “Ultimate Gradient Limitation in Niobium Superconducting Accelerating Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2254-2257.
- M. Krasilnikov, J. W. Baehr, M. H?ñnel, F. Stephan, and I. Will, “Experimental Optimization of the Cathode Laser Temporal Profile”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB29, pp. 135-137.
- D. R. Anderson et al., “Design of a 6 MeV Electron Cooling System for the SSC Medium Energy Booster”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 836-839.
- Q. Xia, L. Zheng, and Y. Du, “Experimental design for validating the feasibility of in-situ plasma cleaning of normal conducting copper cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS66, pp. 3901-3903.
- D. Reschke, “Basic Studies for Process Parameter Developmenst for EP/HPR/Snow Cleaning”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THOAAU02, pp. 462-462.
- M. Thieme, W. Panschow, S. Rauch, and M. Zweig, “Single Board Computer for Device Control in the FAIR Accelerator Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP060, pp. XX-XX.
- F. M. Liu et al., “Drive Laser System for the DC-SRF Photoinjector at Peking University”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4076-4078.
- J. Jiang, H. B. Chen, J. Shi, and P. Wang, “A C-band Deflecting Cavity Design for High-precision Bunch Length Measurement”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2948-2951.
- F. Eoz?®nou, C. Z. Antoine, S. Berry, J.-P. Charrier, Y. Gasser, and D. Reschke, “Low-Voltage Electro-Polishing of SRF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO070, pp. 781-785.
- Y. W. An and S. Wang, “Application of Orbit Response Matrix Method at CSNS/RCS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS011, pp. 2505-2507.
- P. Bernard et al., “Status Report of the Superconducting 5-Cell Acceleration Structure at CERN”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3342-3345.
- W. Chou and Y. Jin, “Impedance Calculations for 2-D and 3-D Structures and the Impedance Budget of 7-GeV APS Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 909-912.
- B. Tang, Q. S. Chen, T. Hu, J. Jiang, and Y. Q. Xiong, “Main Control System of the Linear Accelerator for the HUST THz-FEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1858-1860.
- E. Pozdeyev et al., “Beam Commissioning and Integrated Test of the PIP-II Injector Test Facility”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 13-17.
- Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 246-249.
- C. H. Chen et al., “A Compact, Wavelength Tunable MW-THz FEL Amplifier”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 789-792.
Back to search