JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	I. Rutkowski, M. Grzegrz??lka, L. Butkowski, Ch. Schmidt, and M. Kuntzsch, “Real-time Beam Loading Compensation for Single SRF Cavity LLRF Regulation”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 295-297. doi:10.18429/JACoW-ICALEPCS2015-MOPGF093
[n]	A. Ghribi, P.-E. Bernaudin, R. Ferdinand, and A. V. Vassal, “Cryogenic Tests of the SPIRAL2 LINAC Systems”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1240-1243. doi:10.18429/JACoW-IPAC2019-TUPMP006
[n]	M. C. Ross, R. K. Jobe, J. T. Seeman, J. C. Sheppard, and R. F. Stiening, “High Resolution Beam Profile Monitors in the SLC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2003-2006. 
[n]	J. E. Theed et al., “52 kV Power Supply for Energy Recovery Linac Prototype RF”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF069, pp. 1762-1764. 
[n]	M. Yeddulla, H. G. Geng, Z. Huang, Z. Ma, and S. G. Tantawi, “Waveguide Structures for RF Undulators with Applications to FELs and Storage Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC136, pp. 2326-2328. 
[n]	B.-W. Wei, “Invited Paper: Commissioning of HIRFL”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper A-03, pp. 9-12. 
[n]	I. V. Rybakov, V. V. Paramonov, and A. K. Skasyrskaya, “Manufacturing Tolerances Estimation for Proton Linac Cavities”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 291-293. doi:10.18429/JACoW-RUPAC2016-TUPSA036
[n]	T. H. Li, P. Q. Liu, Z. X. Chen, and F. Zhu, “The Upgrade Project of the Beijing Electron Positron Collider's (BEPCII) Personnel Security Interlock Entrance Guard System.”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99903, pp. XX-XX. 
[n]	A. Avilov, V. Deruyga, G. Popov, V. Rudychev, and I. Zalyubovsky, “Non-Waste and Resource-Saving Radiation Process of Polymer Modified Wood Production”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP126, pp. 2549-2551. 
[n]	M. Titberidze et al., “Novel Femtosecond Level Synchronization of Titanium Sapphire Laser and Relativistic Electron Beams”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD12, pp. 174-178. 
[n]	E. Janas, M. Felber, M. Heuer, U. Mavric, H. Schlarb, and K. Czuba, “MTCA.4 Phase Detector for Femtosecond-Precision Laser Synchronization”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 474-477. doi:10.18429/JACoW-FEL2015-TUP045
[n]	D. J. Scott et al., “VELA Machine Development and Beam Characterisation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1752-1755. doi:10.18429/JACoW-IPAC2015-TUPJE056
[n]	J. Henderson, L. T. Campbell, B. W. J. McNeil, and A. R. Maier, “The Implementation of 3D Undulator Fields in the Unaveraged FEL Simulation Code Puffin”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP022, pp. 416-418. 
[n]	S. Bulka, Z. Dzwigalski, K. Roman, and Z. Zimek, “Short Pulse Electron Accelerator for Pulse Radiolysis Study”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2A19, pp. 2379-2384. 
[n]	Yu. Senichev, “Low Periodicity Lattice for Third Generation Light Sources: Avoidance of Dynamic Aperture Reduction by Sextupole Compensation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP75, pp. 2442-2444. 
[n]	M. Giovannozzi, C. Hernalsteens, J. Williams, and A. Bazzani, “Quantitative Analysis of Trapping Probability for Quasi-integrable Two-degree of Freedom Maps”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3065-3068. doi:10.18429/JACoW-IPAC2014-THPRO079
[n]	T. Plath, J. Roensch-Schulenburg, J. Rossbach, H. Schlarb, S. Schreiber, and B. Steffen, “Commissioning and Diagnostics Development for the New Short-Pulse Injector Laser at FLASH”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC03, pp. 353-356. 
[n]	J. Swierblewski, “Large Scale Testing of SRF Cavities and Modules”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUIOC01, pp. 426-430. 
[n]	C. M. Bhat et al., “Magnetic Field Measurements of the Main Injector Sextupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P007, pp. 3242-3244. 
[n]	J. Henderson, A. C. Dexter, A. J. Moss, and E. W. Snedden, “Laser-to-RF Synchronisation Drift Compensation for the CLARA test facility”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 87-90. doi:10.18429/JACoW-LINAC2022-MOPOPA11
[n]	J. Henderson, D. J. Dunning, and B. W. J. McNeil, “Beam Quality and Transport Stability Simulations in Echo Enabled Harmonic Generation”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB32, pp. 99-102. 
[n]	P. Dolegieviez, R. Ferdinand, X. Ledoux, H. Savajols, and F. Varenne, “Status of the SPIRAL2 Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 844-847. doi:10.18429/JACoW-IPAC2019-MOPTS005

For LaTeX

Use Complete Form

For BibTeX

References

Back to search