JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	I. Martel et al., “ECOS-LINCE: A High Intensity Multi-ion Superconducting Linac for Nuclear Structure and Reactions”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3301-3303. doi:10.18429/JACoW-IPAC2014-THPME036
[n]	T. Lamy, “Reflections on the life of Richard Geller”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper TUIO02, pp. 179-179. 
[n]	W. Beeckman et al., “Magnetic Design Improvement and Construction of the Large 90o Bending Magnet of the Vertical Beam Delivery Line of CNAO”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP111, pp. 1782-1784. 
[n]	C. Zamantzas, B. Dehning, E. Effinger, J. Emery, and S. Jackson, “Real-Time System Supervision for the LHC Beam Loss Monitoring System at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC062, pp. 242-245. 
[n]	J. Tooker and G. Lawrence, “Overview of the APT Accelerator Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA76, pp. 3567-3569. 
[n]	V. Bothe, V. P. Goncharenco, O. A. Gusev, G. A. Martorossian, V. Ts Nikogossian, and K. A. Sadoyan, “The Features of Forming the Magnetic Cycle of Yerevan Synchrotron”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1435-1438. 
[n]	C. Pascual-Izarra et al., “Effortless Creation of Control & Data Acquisition Graphical User Interfaces with Taurus”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1138-1142. doi:10.18429/JACoW-ICALEPCS2015-THHC3O03
[n]	K. Fuchsberger et al., “Determination of the Chromaticity of the TI 8 Transfer Line Based on Kick Response Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP038, pp. 3787-3789. 
[n]	T. Durand et al., “Study of Injection Line of the Cyclotrons C70XP of Arronax”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 100-103. doi:10.18429/JACoW-HIAT2022-TUP14
[n]	P. W. Schmor, R. Baartman, J. W. Carey, D. Dohan, G. Dutto, and G. H. Mackenzie, “Progress Towards Higher Intensities and Improved Beam Stability at TRIUMF”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2092-2095. 
[n]	W. Xu et al., “Multipacting Simulation ADN Test Results of BNL 704 MHz SRF Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC111, pp. 2480-2482. 
[n]	J. John, J. P. Aldridge, K. R. Chapman, R. H. Davis, C. P. Robinson, and W. J. Wallace, “Modification of an Ion Source for the Production of Microampere 4He- Beams”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 82-87. 
[n]	F. Y. Yang, J. Dai, P. He, Z. Q. Li, Y. Ma, and P. Zhang, “Study of Surface Treatment of 1.3 GHz Single-cell Copper Cavity for Niobium Sputtering”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 605-609. doi:10.18429/JACoW-SRF2019-TUP068
[n]	Y. Iwasaki, T. Kaneyasu, S. Koda, and Y. Takabayashi, “Improvements for Simple Operation at SAGA-LS Accelerator”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL023, pp. 76-78. 
[n]	K. J. Bertsche, “Accelerator Production Options for 99Mo”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA025, pp. 121-123. 
[n]	D. Wildman, “Transient Beam Loading Reduction During Multi-Batch Coalescing in the Fermilab Main Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 410-413. 
[n]	M. A. Clarke-Gayther, “A Two Stage Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS104, pp. 1786-1788. 
[n]	M. Kuriki, Y. Seimiya, S. Kashiwagi, T. Okugi, M. Satoh, and J. Urakawa, “An Optimization of Positron Injector of ILC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1334-1336. doi:10.18429/JACoW-IPAC2014-TUPME002
[n]	L. Maunoury et al., “SPIRAL1 Charge Breeder: Performances and Status”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 35-38. doi:10.18429/JACoW-ECRIS2016-MOFO01
[n]	M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP094, pp. 3584-3586. 
[n]	H. Ohgaki, Y. Iwasaki, S. Koda, K. Kudo, T. Tomimasu, and H. Toyokawa, “Design of Control System for SAGA Synchrotron Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE029, pp. 2387-2389. 
[n]	B. Rusnak et al., “Status of RF Superconductivity at Los Alamos National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B05, pp. XX-XX. 
[n]	M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969. 
[n]	M. A. Clarke-Gayther, G. M. Allen, and A. I. Borden, “Global Beam Loss Monitoring using Long Ionisation Chambers at ISIS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1634-1637. 
[n]	A. Young et al., “Design of a Multi-Bunch BPM for the Next Linear Collider”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM09, pp. XX-XX. 
[n]	F. Daclon and J. Miertusova, “Theoretical and Experimental Study of Sorption Processes on Non Evaporable Getters St 707”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3873-3876. 
[n]	K. Ohmi, “Weak-Strong Simulation of Beam-Photoelectron Instability in a Positron Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5V032, pp. 1667-1669. 
[n]	D. B. Shwartz, I. Koop, and P. Yu. Shatunov, “Chromatic and Nonlinear Dynamics of Antiprotons Injected to Collector Ring at FAIR”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 399-401. doi:10.18429/JACoW-RUPAC2016-WEPSB017
[n]	D. Wildman, “Transient Beam Loading Compensation in the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2150-2153. 
[n]	G. Castorina et al., “A TM01 Mode Launcher With Quadrupole Field Components Cancellation for High Brightness Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3631-3633. doi:10.18429/JACoW-IPAC2018-THPAL009
[n]	F. Furuta et al., “Vertical Electropolishing Studies at Cornell with KEK and Marui”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2295-2297. doi:10.18429/JACoW-IPAC2016-WEPMR016
[n]	P. Oddo et al., “Combining Multiple BPM Measurements for Precession AC Dipole Bump Closure”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA05, pp. 892-894. 
[n]	R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2777-2779. doi:10.18429/JACoW-IPAC2019-WEPGW120
[n]	J. Li, P. Wang, and Y. K. Wu, “BPM signal conditioning for a wide range of single bunch current operation in Duke storage ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS040, pp. 4042-4044. 
[n]	K. Nakamura et al., “Performance of Capillary Discharge Guided Laser Plasma Wakefield Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN113, pp. 2978-2980. 
[n]	D. Panasenko et al., “Development of Water Jet Plasma Mirror for Staging of Laser Plasma Accelerators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP077, pp. 2976-2978. 
[n]	J. Miertusova and F. Daclon, “Effect of External Magnetic Field and Radiation upon the Accuracy of Total and Partial Pressure Measurements”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2512-2515. 
[n]	N. Malitsky and D. Dohan, “A New EPICS Archiver”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC035, pp. 632-634. 
[n]	K. E. Robinson and D. C. Quimby, “Canted-Pole Transverse Gradients in Planar Undulators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 428-431. 
[n]	L. Shen, Y. L. Chi, and C. Huang, “A Prototype of Pulsed Power Supply for CSNS/RCS Injection Painting Bump Magnets”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP070, pp. 1711-1713. 
[n]	S. Rubio-Manrique, M. Broseta, G. Cuni, D. Fernandez-Carreiras, A. Rubio, and J. Villanueva, “Integration of PLC's in Tango Control Systems Using PyPLC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 413-416. doi:10.18429/JACoW-ICALEPCS2015-MOPGF140
[n]	A. Castilla, J. R. Delayen, T. Satogata, and V. S. Morozov, “Effects of Crab Cavities' Multipole Content in an Electron-Ion Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3561-3563. doi:10.18429/JACoW-IPAC2015-WEPWI034
[n]	B. E. Norum, “Overview of cw Electron Accelerator Proposals”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3250-3252. 
[n]	M. Therasse, O. Brunner, S. Calatroni, J. K. Chambrillon, B. Delaup, and M. Pasini, “HIE-ISOLDE SRF Development Activities at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC104, pp. 316-318. 
[n]	L. Celona et al., “Commissioning of the AISHa Ion Source at INFN-LNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 570-572. doi:10.18429/JACoW-IPAC2017-MOPIK032
[n]	D. Van Winkle et al., “Commissioning of the LHC Low Level RF System Remote Configuration Tools”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA063, pp. 1479-1481. 
[n]	T. He et al., “Nonlinear optimization for the HLS-II storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2040-2042. doi:10.18429/JACoW-IPAC2024-WEPC37
[n]	J.-P. Carneiro et al., “Multi-Cell Reduced-Beta Elliptical Cavities for a Proton Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP057, pp. 4899-4901. 
[n]	C. M. Bhat, J.-P. Carneiro, R. P. Fliller, G. M. Kazakevich, and J. K. Santucci, “Envelope and Multi-slit Emittance Measurements at Fermilab A0-Photoinjector and Comparison with Simulations”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN097, pp. 2936-2938. 
[n]	A. S. Gogolev, S. R. Uglov, and A. M. Taratin, “Method of State and Alignment Monitoring for Crystal Deflectors of Relativistic Ions”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRAOR02, pp. 200-202. 
[n]	N. Iida et al., “First synchrotron injection attempt into the SuperKEKB HER”, presented at the IPAC'26, Deauville, France, May 2026, paper WEO1T01, unpublished. 
[n]	T. N. Constant, K. Crook, and D. Heggie, “Operational Experience with SLAC's Beam Containment Electronics”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1583-1587. 
[n]	N. Schwerg and O. Brunner, “Practical Test of the Linac4 RF Power System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC138, pp. 403-405. 
[n]	S. Fukumoto et al., “Design of a Synchrotron for Proton Therapy”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 700-703. 
[n]	M. T. Lynch, E. F. Higgins, and P. J. Tallerico, “Phase and Amplitude Feedback Control System for the Los Alamos Free-Electron Laser”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2159-2162. 
[n]	R. Azizi, H. Afarideh, V. Afzalan, J.-S. Chai, and M. Ghergherehchi, “Behavior of Space Charge Dominated Beam Envelope in Central Region of High Current Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT018, pp. 359-360. 
[n]	P. J. S. Barratt et al., “High Stability Operation of the ISIS Pulsed Spallation Neutron Source at 200 micro-A”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP094G, pp. 584-586. 
[n]	N. Lecesne et al., “SHyPIE: A New Source for On Line Production of Multicharged Radioactive Condensable Ion Beams”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-08, pp. 362-365. 
[n]	A. T. Young et al., “Design of a Compact Permanent Magnet Cyclotron Mass Spectrometer for the Detection and Measurement of Trace Isotopes”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XII-03, pp. 705-708. 
[n]	S. Rubio-Manrique, G. Cuni, D. Fernandez-Carreiras, Z. Reszela, and A. Rubio, “PyPLC, a Versatile PLC-to-PC Python Interface”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO011, pp. 179-181. 
[n]	B. E. Norum and R. Rossmanith, “Laser Induced Extraction from the LHC or SSC”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 336-339. 
[n]	S. A. Bogacz, “Multi-pass ERL in a ÔÇÖDogboneÔÇÖ Topology”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1601-1603. doi:10.18429/JACoW-IPAC2019-TUPGW084
[n]	G. M. Ge, D. Gonnella, G. H. Hoffstaetter, M. Liepe, H. Padamsee, and F. Furuta, “Investigation of the Surface Resistivity of SRF Cavities via the Heat and Srimp Program as Well as the Multi-Cell T-Map System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP105, pp. 724-727. 
[n]	Z. H. Mi et al., “Tuner Design and Test for 166.6 MHz SRF Cavity of HEPS”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 642-645. doi:10.18429/JACoW-SRF2019-TUP080
[n]	K. J. Bertsche and M. K. Sullivan, “Solenoid Compensation for the SuperB Interaction Region”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB024, pp. 1572-1574. 
[n]	B. Rusnak, “RF Power and HOM Coupler Tutorial”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUT02, pp. 496-515. 
[n]	G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 803-806. 
[n]	Y. Chao, S. A. Bogacz, and V. A. Lebedev, “Simultaneous Multiple Pass Steering at Jefferson Lab”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP35, pp. 738-740. 
[n]	T. Hofmann et al., “Status of and Future Plans for the CERN LINAC4 Emittance Meter based on Laser Electron-Detachment and a Diamond Strip-Detector”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF15, pp. 83-87. 
[n]	V. Afzalan, H. Afarideh, R. Azizi, J.-S. Chai, and M. Ghergherehchi, “Design and Simulation of Cavity for 10 MeV Compact Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT023, pp. 200-202. 
[n]	G. M. Ge and G. H. Hoffstaetter, “Investigation of the Surface Resistivity of SRF Cavities via theHEAT and SRIMP Program as well as the Multi-cell T-Map System”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC10, pp. 808-810. 
[n]	E. Williams and J. Zhou, “Secure integration of SLAC S3DF with EPICS control systems for machine learning-driven accelerator optimization”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1515-1518. doi:10.18429/JACoW-ICALEPCS2025-THMR001
[n]	Yu. G. Basargin et al., “103-cm Compact Isochronous Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 102-107. 
[n]	F. Roncarolo et al., “Scattering of H- Stripped Electrons from SEM Grids and Wire Scanners at the CERN LINAC4”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB041, pp. 567-569. 
[n]	F. Caspers et al., “The 4.8 GHz LHC Schottky Pick-up System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN068, pp. 4174-4176. 
[n]	M. Ghergherehchi, J.-S. Chai, and H. Afarideh, “62Zn Radioisotope Production by Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPSH006, pp. 393-396. 
[n]	W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 434-437. 
[n]	V. Ts. Nikogosyan, A. I. Barishev, H. A. Martirosyan, K. A. Sadoyan, Kh. A. Simonyan, and A. R. Toumanyan, “Super Cycle Synchrotron-Stretcher”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1589-1592. 
[n]	X. Sun and O. Singh, “Tuning the Narrow-band Beam Position Monitor Sampling Clock to Remove the Aliasing Errors in APS Storage Ring Orbit Measurements”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN120, pp. 4402-4404. 
[n]	H. Ohgaki et al., “PC-LabView Based Control System in SAGA-LS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT076, pp. 3976-3978. 
[n]	Y. J. Yuan et al., “Status and Upgrades of HIRFL”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUM1I01, pp. 110-114. 
[n]	M. Lechartier, D. Besnier, J. F. Leyge, and M. Michel, “Design of the MEBT Rebunchers for the SPIRAL 2 Driver”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper C-09, pp. 278-281. 
[n]	R. Kuroda et al., “Measurement of Beam Characteristics for Photo-Electron Beam at Waseda University”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH079, pp. 2275-2277. 
[n]	Y. Ohnishi, H. Koiso, A. Morita, K. Ohmi, H. Sugimoto, and K. Oide, “Off-momentum Optics at SuperKEKB”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 71. doi:10.18429/JACoW-eeFACT2018-TUOBB02
[n]	F. H. O et al., “A Short Period Undulator Utilizing a Novel Material”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP082, pp. 2459-2461. 
[n]	D. G. Li et al., “SASE FEL at SDUV-FEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPA02, pp. 362-365. 
[n]	C. Toth et al., “Colliding Pulse Injection Experiments in Non-Collinear Geometry for Controlled Laser Plasma Wakefield Acceleration of Electrons”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN112, pp. 2975-2977. 
[n]	A. Leduc et al., “Plasma Modelization and Study for the PHOENIX V3 ECR Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 176-179. doi:10.18429/JACoW-ECRIS2018-WEB2
[n]	Y. Iwasaki et al., “The Injection System of SAGA Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE048, pp. 3007-3009. 
[n]	C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 252-254. doi:10.18429/JACoW-LINAC2022-MOPORI11

For LaTeX

Use Complete Form

For BibTeX

References

Back to search