Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. M. Moftah, S. Aldelaijan, F. M. Alrumayan, F. Alzorkani, S. Devic, and M. Shehadeh, “Characterization of the CS30 Cyclotron at KFSH&RC for Radiotherapy Applications”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPSH008, pp. 400-402.
[n] B. C. Gonsalves, R. J. Barlow, S. C. Lee, R. M. Dos Santos Augusto, and T. Stora, “Beam Energy Deposition from PS Booster and Production Rates of Selected Medical Radioisotopes in the CERN-MEDICIS Target”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1936-1939. doi:10.18429/JACoW-IPAC2016-TUPOY017
[n] J. Norem et al., “An e+e- Collider in the VLHC Tunnel”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH112, pp. 3493-3495.
[n] M. Lechartier, D. Besnier, J. F. Leyge, and M. Michel, “Design of the MEBT Rebunchers for the SPIRAL 2 Driver”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper C-09, pp. 278-281.
[n] M. H. Bickley, D. R. Douglas, and R. V. Servranckx, “DIMAD Based Interactive Simulation of the CEBAF Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 309-312.
[n] C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 252-254. doi:10.18429/JACoW-LINAC2022-MOPORI11
[n] A. S. Setty et al., “A New Buncher for the ESRF Linac Injector”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 389-391. doi:10.18429/JACoW-IPAC2016-MOPMW001
[n] D. A. Swenson, T. Enegren, A. D. Ringwall, C. M. Combs, Y. Goren, and M. D. Hayworth, “The SSC RFQ-DTL Matching Section Buncher Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 846-849.
[n] W. Merz, C. Ankenbrandt, and K. Koepke, “Transition Jump System for the Fermilab Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1343-1346.
[n] Yu. G. Basargin et al., “Invited Paper: Status of the Kiev 240-cm Cyclotron Facility”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-02, pp. 1879-1881.
[n] A. Kumar, B. K. Sahu, and K. Singh, “The IUAC Tandem-LINAC Control System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THIA03, pp. 94-96.
[n] P. Rauer, “First lasing of a cavity based X-ray FEL”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2162, unpublished.
[n] R. Zeng et al., “Design of the Phase Reference Distribution System at ESS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP043, pp. 529-531.
[n] J. Lyles, J. Upadhyay, W. Hall, and M. Sanchez Barrueta, “Future directions for RF buncher at LANSCE proton storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1687-1690. doi:10.18429/JACoW-IPAC2024-TUPS26
[n] G. Wright and M. Bree, “Status Monitoring of the EPICS Control System at the Canadian Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 667-668. doi:10.18429/JACoW-ICALEPCS2015-WEM304
[n] L. Egoriti et al., “Development of a Proton-to-Neutron Converter for Radioisotope Production at ISAC-TRIUMF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3917-3920. doi:10.18429/JACoW-IPAC2018-THPAL117
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, and J. Chen, “A Success-History Based Learning Procedure to Optimize Server Throughput in Large Distributed Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1182-1189. doi:10.18429/JACoW-ICALEPCS2017-THCPL03
[n] N. Kohlstrunk et al., “Mechanical Aspects of the New Shutter Design at European XFEL”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPA05, pp. XX-XX.
[n] V. Morozov et al., “Proton and electron RLA optics design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 958-961. doi:10.18429/JACoW-IPAC2023-MOPL180
[n] W. Hartmann et al., “Source of Polarized Electrons”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1335-1337.
[n] L. Badano et al., “A Real-Time Beam Monitor for Hadrontherapy Applications Based on Thin Foil Secondary Electron Emission and a Back-Thinned Monolithic Pixel Sensor”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC20, pp. 352-354.
[n] F. Bouly, M. Di Giacomo, J. F. Leyge, and M. Tontayeva, “Superconducting Cavity and RF Control Loop Model for the SPIRAL2 Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 767-770. doi:10.18429/JACoW-LINAC2022-THPOPA13
For LaTeX
Use Complete Form
For BibTeX
References
- B. M. Moftah, S. Aldelaijan, F. M. Alrumayan, F. Alzorkani, S. Devic, and M. Shehadeh, “Characterization of the CS30 Cyclotron at KFSH&RC for Radiotherapy Applications”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPSH008, pp. 400-402.
- B. C. Gonsalves, R. J. Barlow, S. C. Lee, R. M. Dos Santos Augusto, and T. Stora, “Beam Energy Deposition from PS Booster and Production Rates of Selected Medical Radioisotopes in the CERN-MEDICIS Target”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1936-1939.
- J. Norem et al., “An e+e- Collider in the VLHC Tunnel”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH112, pp. 3493-3495.
- M. Lechartier, D. Besnier, J. F. Leyge, and M. Michel, “Design of the MEBT Rebunchers for the SPIRAL 2 Driver”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper C-09, pp. 278-281.
- M. H. Bickley, D. R. Douglas, and R. V. Servranckx, “DIMAD Based Interactive Simulation of the CEBAF Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 309-312.
- C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 252-254.
- A. S. Setty et al., “A New Buncher for the ESRF Linac Injector”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 389-391.
- D. A. Swenson, T. Enegren, A. D. Ringwall, C. M. Combs, Y. Goren, and M. D. Hayworth, “The SSC RFQ-DTL Matching Section Buncher Cavities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 846-849.
- W. Merz, C. Ankenbrandt, and K. Koepke, “Transition Jump System for the Fermilab Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1343-1346.
- Yu. G. Basargin et al., “Invited Paper: Status of the Kiev 240-cm Cyclotron Facility”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-02, pp. 1879-1881.
- A. Kumar, B. K. Sahu, and K. Singh, “The IUAC Tandem-LINAC Control System”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THIA03, pp. 94-96.
- P. Rauer, “First lasing of a cavity based X-ray FEL”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2162, this conference.
- R. Zeng et al., “Design of the Phase Reference Distribution System at ESS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP043, pp. 529-531.
- J. Lyles, J. Upadhyay, W. Hall, and M. Sanchez Barrueta, “Future directions for RF buncher at LANSCE proton storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS26, pp. 1687-1690.
- G. Wright and M. Bree, “Status Monitoring of the EPICS Control System at the Canadian Light Source”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 667-668.
- L. Egoriti et al., “Development of a Proton-to-Neutron Converter for Radioisotope Production at ISAC-TRIUMF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3917-3920.
- Y. Gao, T. G. Robertazzi, K. A. Brown, and J. Chen, “A Success-History Based Learning Procedure to Optimize Server Throughput in Large Distributed Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1182-1189.
- N. Kohlstrunk et al., “Mechanical Aspects of the New Shutter Design at European XFEL”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPA05, pp. XX-XX.
- V. Morozov et al., “Proton and electron RLA optics design”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL180, pp. 958-961.
- W. Hartmann et al., “Source of Polarized Electrons”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1335-1337.
- L. Badano et al., “A Real-Time Beam Monitor for Hadrontherapy Applications Based on Thin Foil Secondary Electron Emission and a Back-Thinned Monolithic Pixel Sensor”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC20, pp. 352-354.
- F. Bouly, M. Di Giacomo, J. F. Leyge, and M. Tontayeva, “Superconducting Cavity and RF Control Loop Model for the SPIRAL2 Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 767-770.
Back to search