Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Toge et al., “Recent Commissioning Experience on the SLC Arcs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1844-1847.
[n] T. Fujisawa et al., “Design of Radio-Frequency System for the RIKEN Separated Sector Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2897-2900.
[n] C. D. Moore et al., “Overview of the LBNE Neutrino Beam”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP248, pp. 1948-1950.
[n] M. Gusarova and I. I. Petrushina, “Influence of the Different Geometric Parameters of Superconducting Elliptical Cavities on the Multipactor”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC19, pp. 362-364.
[n] S. Marini, I. Moulanier, D. Minenna, P. A. P. Nghiem, F. Massimo, and B. Cros, “Design of a laser wakefield relativistic electron source”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA090, unpublished.
[n] H. Chaloupka et al., “A Proposed Superconducting Photoemission Source of High Brightness”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G12, pp. XX-XX.
[n] Z. Baraissov, D. A. Muller, M. Liepe, and Z. Sun, “Measuring Composition Variations and Lattice Strain in Nb3Sn Films”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPFDV011, pp..
[n] J.-Y. Hwang et al., “The Improvement of NSRRC Linac for Top-up Mode Operation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF044, pp. 2374-2376.
[n] J. J. Garcia-Garrigos, C. Blanch Gutierrez, J. V. Civera, A. Faus-Golfe, and S. Doebert, “Beam Test Performance of the Beam Position Monitors for the TBL Line of the CTF3 at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC130, pp. 1326-1328.
[n] G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
[n] J.-M. Zentler, R. D. Van Maren, and W. E. Nexsen, “Improved Focus Solenoid Design for Linear Induction Accelerators”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-52, pp. 459-461.
[n] Y. Trenikhina, A. Romanenko, J. Kwon, and J.-M. Zuo, “Nanostructure of the Penetration Depth in Nb Cavities: Debunking the Myths and New Findings”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper WEA1A05, pp. 937-942.
[n] A. Yamamoto et al., “Fabrication of an X-band 30 cm Accelerating Structure by Diffusion Brazing”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2182-2185.
[n] T. Tajima et al., “Development of HOM Absorber for KEK B-Factory SC Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I39, pp. XX-XX.
[n] B. L. Cathey and G. Stancari, “Progress on the Electron Gun Design for a McMillan Electron Lens in the Fermilab Integrable Optics Test Accelerator (IOTA)”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1988-1991. doi:10.18429/JACoW-IPAC2021-TUPAB236
[n] A. S. Tsyganov et al., “Stand for Precision Measurements of Magnetic Lenses Field Quality”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC022, pp. 495-497.
[n] G. H. Wei et al., “Beam Injection Tuning of the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB015, pp. 3915-3917.
[n] A. Toral Diez, S. L. Birch, M. Mansouri, A. Nordt, D. Paulic, and Y. K. Sin, “ESS Accelarator Oxygen Depletion Hazard Detection System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 666-669. doi:10.18429/JACoW-ICALEPCS2017-TUPHA106
[n] A. K. Orduz et al., “SPIRAL2 Final Commissioning Results”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 314-318. doi:10.18429/JACoW-LINAC2022-TU2AA02
[n] D. Prasuhn et al., “Status of the Cooler Synchrotron COSY-Juelich”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB069, pp. 3428-3430.
[n] S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Optical System of Beam Induced Fluorescence Monitor Toward MW Beam Power at the J-PARC Neutrino Beamline”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 505-508. doi:10.18429/JACoW-IBIC2018-WEPC08
For LaTeX
Use Complete Form
For BibTeX
References
- N. Toge et al., “Recent Commissioning Experience on the SLC Arcs”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1844-1847.
- T. Fujisawa et al., “Design of Radio-Frequency System for the RIKEN Separated Sector Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2897-2900.
- C. D. Moore et al., “Overview of the LBNE Neutrino Beam”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP248, pp. 1948-1950.
- M. Gusarova and I. I. Petrushina, “Influence of the Different Geometric Parameters of Superconducting Elliptical Cavities on the Multipactor”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC19, pp. 362-364.
- S. Marini, I. Moulanier, D. Minenna, P. A. P. Nghiem, F. Massimo, and B. Cros, “Design of a laser wakefield relativistic electron source”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA090, unpublished.
- H. Chaloupka et al., “A Proposed Superconducting Photoemission Source of High Brightness”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G12, pp. XX-XX.
- Z. Baraissov, D. A. Muller, M. Liepe, and Z. Sun, “Measuring Composition Variations and Lattice Strain in Nb3Sn Films”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPFDV011, pp..
- J.-Y. Hwang et al., “The Improvement of NSRRC Linac for Top-up Mode Operation”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF044, pp. 2374-2376.
- J. J. Garcia-Garrigos, C. Blanch Gutierrez, J. V. Civera, A. Faus-Golfe, and S. Doebert, “Beam Test Performance of the Beam Position Monitors for the TBL Line of the CTF3 at CERN”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC130, pp. 1326-1328.
- G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
- J.-M. Zentler, R. D. Van Maren, and W. E. Nexsen, “Improved Focus Solenoid Design for Linear Induction Accelerators”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-52, pp. 459-461.
- Y. Trenikhina, A. Romanenko, J. Kwon, and J.-M. Zuo, “Nanostructure of the Penetration Depth in Nb Cavities: Debunking the Myths and New Findings”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper WEA1A05, pp. 937-942.
- A. Yamamoto et al., “Fabrication of an X-band 30 cm Accelerating Structure by Diffusion Brazing”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2182-2185.
- T. Tajima et al., “Development of HOM Absorber for KEK B-Factory SC Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I39, pp. XX-XX.
- B. L. Cathey and G. Stancari, “Progress on the Electron Gun Design for a McMillan Electron Lens in the Fermilab Integrable Optics Test Accelerator (IOTA)”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1988-1991.
- A. S. Tsyganov et al., “Stand for Precision Measurements of Magnetic Lenses Field Quality”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC022, pp. 495-497.
- G. H. Wei et al., “Beam Injection Tuning of the J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB015, pp. 3915-3917.
- A. Toral Diez, S. L. Birch, M. Mansouri, A. Nordt, D. Paulic, and Y. K. Sin, “ESS Accelarator Oxygen Depletion Hazard Detection System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 666-669.
- A. K. Orduz et al., “SPIRAL2 Final Commissioning Results”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 314-318.
- D. Prasuhn et al., “Status of the Cooler Synchrotron COSY-Juelich”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB069, pp. 3428-3430.
- S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Optical System of Beam Induced Fluorescence Monitor Toward MW Beam Power at the J-PARC Neutrino Beamline”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 505-508.
Back to search