Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. C. M. Rial and Z. Patel, “Impact of Electron Beam Heating on Insertion Devices at Diamond Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1588-1591. doi:10.18429/JACoW-IPAC2017-TUPAB115
[n] L. T. Sun, “High Intensity Operation for Heavy Ion Cyclotron of Highly Charged ECR Ion Sources”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU1PB01, pp. 125-129.
[n] L. X. Hu et al., “Collimator for Beam Position Measurement and Beam Collimation for Cyclotron”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 224-227. doi:10.18429/JACoW-IBIC2018-TUPA07
[n] P. Y. Beauvais, G. Haouat, and N. Pichoff, “Halo Formation from Beam Coulomb Scattering on Residual Gas”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP017L, pp. 1209-1211.
[n] C. Tang, H. Chen, Y. Hu, Y. Z. Lin, and D. Tong, “An X-Band Disk-and-Washer Accelerating Structure for Electron Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH089, pp. 975-977.
[n] S. P. Moeller, “ASTRID - A Small Multi-Purpose Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 158-161.
[n] Y. Li et al., “Applying Cascaded Parameter Scan to Study Top-off Safety in NSLS-II Storage Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP276, pp. 627-629.
[n] O. Pinazza et al., “Managing Information Flow in ALICE”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN015, pp. 124-126.
[n] S. Kolesov, H. Chaloupka, and A. Baumfalk, “High Temperature Superconductor High Power RF-Devices”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B15, pp. 407-412.
[n] S. Joly, G. Iadarola, M. Migliorati, N. Mounet, B. Salvant, and C. Zannini, “Recent Advances in the CERN PS Impedance Model and Instability Simulations”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 86-90. doi:10.18429/JACoW-HB2023-TUA2C2
[n] A. Denker et al., “Status of the HZB Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT002, pp. 31-33.
[n] K. Hirano, Y. L. Wang, T. Emoto, A. Enomoto, and I. Sato, “Development of a High Power 1.2 MW CW L-Band Klystron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ08, pp. 1539-1541.
[n] J. Li, C. Sun, and Y. K. Wu, “Improved Long Radius of Curvature Measurement System for FEL Mirrors”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE022, pp. 1787-1789.
[n] H. Zhang, S. V. Benson, M. W. Bruker, and Y. Zhang, “JSPEC - A Simulation Program for IBS and Electron Cooling”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 49-52. doi:10.18429/JACoW-IPAC2021-MOPAB004
[n] T. Olsson and H. C. Chao, “Fill Pattern for Reducing Transient Beam Loading and Ion-Trapping in the Diamond-II Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1483-1486. doi:10.18429/JACoW-IPAC2022-TUPOMS031
[n] F. Brinker, “Online Calculation of the Beam Trajectory in the HERA Interaction Regions”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT035, pp. 1222-1224.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n] C. M. Caselle et al., “A Picosecond Sampling Electronic ``KAPTURE'' for Terahertz Synchrotron Radiation”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOCZB1, pp. 24-28.
[n] D. Prasuhn et al., “The Medium Energy Proton Synchrotron COSY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B19, pp. 590-592.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Optimisation of the PERLE Injector”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 107-111. doi:10.18429/JACoW-ERL2019-WEPNEC19
[n] Q. A. Kerns and H. W. Miller, “100 kW RF Power Amplifier”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 246-249.
[n] S. Wang and J. Deng, “Acceleration Module in Linear Induction Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD073, pp. 4449-4451.
[n] J. Stovall et al., “Expected Beam Performance of the SNS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPB007, pp. 446-450.
[n] Z. Li, X. Deng, Z. Pan, C. Tang, and A. Chao, “Generalized longitudinal strong focusing in a storage ring for coherent EUV radiation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1134-1136. doi:10.18429/JACoW-IPAC2023-MOPM065
[n] M. S. Zisman, “R&D toward a Neutrino Factory and Muon Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU1GRI02, pp. 647-651.
[n] S. Joly, A. Lasheen, B. Salvant, B. Mikulec, M. Migliorati, and N. Mounet, “Overview of transverse instabilities in the CERN Proton Synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3450-3453. doi:10.18429/JACoW-IPAC2023-WEPL148
[n] C. Tang, “The Development of Accelerator Applications in China”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THM202, pp. XX-XX.
[n] H. Wang, U. Ratzinger, and M. Schuett, “Operations of Copper Cavities at Cryogenic Temperatures”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 533-536. doi:10.18429/JACoW-LINAC2022-TUPOGE18
[n] A. Meseck, R. Mitzner, W. Decking, B. Faatz, and M. Scholz, “HGHG Scheme for FLASH II”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC05, pp. 107-110.
For LaTeX
Use Complete Form
For BibTeX
References
- E. C. M. Rial and Z. Patel, “Impact of Electron Beam Heating on Insertion Devices at Diamond Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1588-1591.
- L. T. Sun, “High Intensity Operation for Heavy Ion Cyclotron of Highly Charged ECR Ion Sources”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU1PB01, pp. 125-129.
- L. X. Hu et al., “Collimator for Beam Position Measurement and Beam Collimation for Cyclotron”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 224-227.
- P. Y. Beauvais, G. Haouat, and N. Pichoff, “Halo Formation from Beam Coulomb Scattering on Residual Gas”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP017L, pp. 1209-1211.
- C. Tang, H. Chen, Y. Hu, Y. Z. Lin, and D. Tong, “An X-Band Disk-and-Washer Accelerating Structure for Electron Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH089, pp. 975-977.
- S. P. Moeller, “ASTRID - A Small Multi-Purpose Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 158-161.
- Y. Li et al., “Applying Cascaded Parameter Scan to Study Top-off Safety in NSLS-II Storage Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP276, pp. 627-629.
- O. Pinazza et al., “Managing Information Flow in ALICE”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN015, pp. 124-126.
- S. Kolesov, H. Chaloupka, and A. Baumfalk, “High Temperature Superconductor High Power RF-Devices”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97B15, pp. 407-412.
- S. Joly, G. Iadarola, M. Migliorati, N. Mounet, B. Salvant, and C. Zannini, “Recent Advances in the CERN PS Impedance Model and Instability Simulations”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA2C2, pp. 86-90.
- A. Denker et al., “Status of the HZB Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT002, pp. 31-33.
- K. Hirano, Y. L. Wang, T. Emoto, A. Enomoto, and I. Sato, “Development of a High Power 1.2 MW CW L-Band Klystron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ08, pp. 1539-1541.
- J. Li, C. Sun, and Y. K. Wu, “Improved Long Radius of Curvature Measurement System for FEL Mirrors”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE022, pp. 1787-1789.
- H. Zhang, S. V. Benson, M. W. Bruker, and Y. Zhang, “JSPEC - A Simulation Program for IBS and Electron Cooling”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 49-52.
- T. Olsson and H. C. Chao, “Fill Pattern for Reducing Transient Beam Loading and Ion-Trapping in the Diamond-II Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1483-1486.
- F. Brinker, “Online Calculation of the Beam Trajectory in the HERA Interaction Regions”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT035, pp. 1222-1224.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2071-2074.
- C. M. Caselle et al., “A Picosecond Sampling Electronic ``KAPTURE'' for Terahertz Synchrotron Radiation”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOCZB1, pp. 24-28.
- D. Prasuhn et al., “The Medium Energy Proton Synchrotron COSY”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B19, pp. 590-592.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Optimisation of the PERLE Injector”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 107-111.
- Q. A. Kerns and H. W. Miller, “100 kW RF Power Amplifier”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 246-249.
- S. Wang and J. Deng, “Acceleration Module in Linear Induction Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD073, pp. 4449-4451.
- J. Stovall et al., “Expected Beam Performance of the SNS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPB007, pp. 446-450.
- Z. Li, X. Deng, Z. Pan, C. Tang, and A. Chao, “Generalized longitudinal strong focusing in a storage ring for coherent EUV radiation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM065, pp. 1134-1136.
- M. S. Zisman, “R&D toward a Neutrino Factory and Muon Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU1GRI02, pp. 647-651.
- S. Joly, A. Lasheen, B. Salvant, B. Mikulec, M. Migliorati, and N. Mounet, “Overview of transverse instabilities in the CERN Proton Synchrotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL148, pp. 3450-3453.
- C. Tang, “The Development of Accelerator Applications in China”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THM202, pp. XX-XX.
- H. Wang, U. Ratzinger, and M. Schuett, “Operations of Copper Cavities at Cryogenic Temperatures”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 533-536.
- A. Meseck, R. Mitzner, W. Decking, B. Faatz, and M. Scholz, “HGHG Scheme for FLASH II”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPC05, pp. 107-110.
Back to search