Favourites
For Word
[n] N. Triantafyllou, R. Bruce, and S. Redaelli, “Analysis of the performance in the 2023 LHC Pb-Pb run”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 955-958. doi:10.18429/JACoW-IPAC2024-TUBD2
[n] K. A. Dewhurst et al., “Design of the Cockcroft Beamline: Adjustable Transport of Laser Wakefield Electrons to an Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3749-3752. doi:10.18429/JACoW-IPAC2019-THPGW070
[n] P. Kicsiny and X. Buffat, “Estimation of FCC-ee beam lifetime from full lattice tracking”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 410-413. doi:10.18429/JACoW-IPAC2025-MOPM041
[n] L. P. Bellier, J. N. Jacquemier, L. Soby, and S. Deghaye, “CTF3 Beam Position Monitor Acquisition System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB01, pp. 395-397.
[n] K. A. Dewhurst, H. L. Owen, and B. D. Muratori, “Use of Laser Wakefield Accelerators as Injectors for Compact Storage Rings”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1760-1762. doi:10.18429/JACoW-IPAC2017-TUPIK036
[n] B. Dunham, “An industrial light source for semiconductor manufacturing”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUVD1, unpublished.
[n] T. Lefevre, H.-H. Braun, E. Bravin, R. Corsini, A.-L. Perrot, and D. Schulte, “Beam Halo Monitoring on the CLIC Test Facility 3”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT147, pp. 2801-2803.
[n] V. Wu, A. Z. Chen, Z. Qian, and D. Wildman, “Design of a New Main Injector Cavity for the Fermilab Proton Driver Era”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT028, pp. 2015-2017.
[n] W. Barletta, “Design of the Vacuum System for the High Energy Ring of an Asymmetric B-factroy Based on PEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2310-2313.
[n] E. Syresin et al., “NICA Ion Coolider at JINR”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 12-16. doi:10.18429/JACoW-RuPAC2021-MOY02
[n] C. Pellegrini et al., “A High Luminosity Superconducting Mini Collider for Phi Meson Production and Particle Beam Physics”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2856-2859.
[n] E. Syresin et al., “SASE Gain-Curve Measurements with MCP-Based Detectors at the European XFEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 96-98. doi:10.18429/JACoW-IPAC2021-MOPAB018
[n] N. Hiller et al., “Maximizing the hard-X-ray performance of SwissFEL by systematic re-alignment and recalibration of the Aramis undulator line”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 122-125. doi:10.18429/JACoW-IPAC2025-MOPB028
[n] C. Milardi et al., “CTF3 Compressor System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI057, pp. 416-418.
[n] T. E. Oseroff, M. Liepe, and Z. Sun, “Sample Test Systems for Next-Gen SRF Surfaces”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 357. doi:10.18429/JACoW-SRF2021-TUOFDV07
[n] N. Banerjee, A. Romanov, A. Valishev, G. Stancari, J. Wieland, and N. Kuklev, “Experimental verification of integrability in a Danilov-Nagaitsev lattice using machine learning”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 878-881. doi:10.18429/JACoW-IPAC2024-MOPS67
[n] J. Yang et al., “Photocathode Femtosecond Electron Beam Applications: Femtosecond Pulse Radiolysis and Femtosecond Electron Diffraction”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC029, pp. 4113-4115.
[n] M. Bousonville et al., “European XFEL High-Power RF System - the First 4 Years of Operation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2708-2710. doi:10.18429/JACoW-IPAC2021-WEPAB045
[n] V. Vlachodimitropoulos, M. J. Barnes, A. Chmielinska, L. Ducimeti?¿re, L. Vega Cid, and W. J. M. Weterings, “Studies Towards the New Beam Screen System of the LHC Injection Kicker Magnet for HL-LHC Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3982-3985. doi:10.18429/JACoW-IPAC2019-THPRB074
[n] D. Reistad, B. G?Ñlnander, K. Rathsman, and A. O. Sidorin, “Calculations on High-energy Electron Cooling in the HESR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper MOA2C05, pp. 44-48.
[n] M. Zhou et al., “Modeling Self-Ionized Plasma Wakefield Acceleration for Afterburner Parameters Using QuickPIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE046, pp. 2905-2907.
[n] M. Koratzinos, “CEPC Design Performance Considerations”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT4A2, pp. 22-26.
[n] K. A. Brown, P. Chitnis, C. Theisen, and G. Wang, “Machine Protection Issues for eRHIC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA03, pp. 914-917.
[n] T. H. Nicol et al., “Cryomodule Design for 325 MHz Superconducting Single Spoke Cavities and Solenoids”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP079, pp. 970-972.
[n] L. H. J. Bozyk, D. H. H. Hoffmann, H. Kollmus, and P. J. Spiller, “Development of a Cryocatcher Prototype for SIS100”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC078, pp. 4238-4240.
[n] K. Shih et al., “Demonstration of time-resolved diagnostic in coherent electron cooling pop experiment”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2203-2205. doi:10.18429/JACoW-IPAC2024-WEPG11
[n] P. D. Hermes, K. A. Dewhurst, A. S. Fomin, D. Mirarchi, and S. Redaelli, “Layouts for Feasibility Studies of Fixed-Target Experiments at the LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2134-2137. doi:10.18429/JACoW-IPAC2022-WEPOTK033
[n] S.-Y. Chen et al., “Externally Controlled Injection of Electrons by a Laser Pulse in a Laser Wakefield Electron Accelerator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE064, pp. 3644-3646.
[n] D. Y. Chen et al., “Simulation of Broadband Laser Cooling of Relativistic Ion Beams at the Csre”, presented at the COOL2023, Montreux, Switzerland, Oct. 2023, paper THPOSRP19, unpublished.
[n] E. Acerbi, G. C. Rivoltella, L. Rossi, and G. Raia, “The Beam Diagnostics of the Milan K800 Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-03, pp. 283-286.
[n] J. C. Jan et al., “Design of a 3.5 T Superconducting Multipole Wiggler”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3564-3567. doi:10.18429/JACoW-IPAC2017-WEPVA127
[n] N. Winters and E. Rosi, “FAIR Project Management”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP8033, unpublished.
[n] C. Limborg, J. E. Clendenin, D. H. Dowell, S. Gierman, and J. Schmerge, “New Optimization for the LCLS Photo-injector”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI041, pp. 1789-1791.
[n] W. Barry et al., “Design of the PEP-II Transverse Coupled-Bunch Feedback System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ08, pp. 2681-2683.
[n] E. A. Knapp, A. Carne, G. D??me, S. T. Giordano, C. W. Owen, and D. A. Swenson, “Round Table Discussion of RF Structures”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-15, pp. 583-599.
[n] F. Schmidt, Y. Alexahin, V. A. Lebedev, D. Still, and A. Valishev, “Measurement and Correction of the 3rd Order Resonance in the Tevatron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH096, pp. 2140-2142.
[n] A. V. Butenko et al., “Commissioning of New Light Ion RFQ Linac and First Nuclotron Run with New Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2366-2368. doi:10.18429/JACoW-IPAC2017-TUPVA117
[n] T. J. Bian, S. An, F. P. Guan, L. Y. Ji, and S. M. Wei, “Feasibility Study on 10 MW-Class Ultra-High Power Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper FRAO02, pp. 359-363. doi:10.18429/JACoW-CYCLOTRONS2022-FRAO02
[n] Z. H. Bai, W. Li, L. Wang, and P. H. Yang, “Design Study for the First Version of the HALS Lattice”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2713-2715. doi:10.18429/JACoW-IPAC2017-WEPAB060
[n] G. R. Werner and J. R. Cary, “Designing Photonic Crystal Devices for Accelerators”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE051, pp. 3164-3166.
[n] T. Zwart et al., “Test of a Fast Ferrite Reactive Tuner for Control of Microphonics at the S-Dalinac”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPPT095, unpublished.
[n] A. Seibel et al., “Welding and Copper Plating Investigations on the FAIR Proton Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 345-347. doi:10.18429/JACoW-LINAC2022-TUPOJO05
[n] F. Rosatelli et al., “Design, Manufacturing and First Measurements of a Hybrid Permanent Magnet Undulator for Free Electron Laser”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2760-2763.
[n] R. Niemczyk et al., “Experimental Slice Emittance Reduction at PITZ Using Laser Pulse Shaping”, presented at the IPAC'22, Bangkok, Thailand, Jun. 2022, paper THOYGD2, unpublished.
[n] A. Fornara, G. Sterbini, and M. Giovannozzi, “Current classification strategies based on the transfer function and field quality of the new superconducting magnets in the HL-LHC”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5068, unpublished.
[n] J. M. Liu et al., “Research and Development Progress of CEPC RF Shield Bellows”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 142-144. doi:10.18429/JACoW-IPAC2021-MOPAB030
For LaTeX
Use Complete Form
For BibTeX
References
- N. Triantafyllou, R. Bruce, and S. Redaelli, “Analysis of the performance in the 2023 LHC Pb-Pb run”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUBD2, pp. 955-958.
- K. A. Dewhurst et al., “Design of the Cockcroft Beamline: Adjustable Transport of Laser Wakefield Electrons to an Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3749-3752.
- P. Kicsiny and X. Buffat, “Estimation of FCC-ee beam lifetime from full lattice tracking”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM041, pp. 410-413.
- L. P. Bellier, J. N. Jacquemier, L. Soby, and S. Deghaye, “CTF3 Beam Position Monitor Acquisition System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB01, pp. 395-397.
- K. A. Dewhurst, H. L. Owen, and B. D. Muratori, “Use of Laser Wakefield Accelerators as Injectors for Compact Storage Rings”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1760-1762.
- B. Dunham, “An industrial light source for semiconductor manufacturing”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUVD1, unpublished.
- T. Lefevre, H.-H. Braun, E. Bravin, R. Corsini, A.-L. Perrot, and D. Schulte, “Beam Halo Monitoring on the CLIC Test Facility 3”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT147, pp. 2801-2803.
- V. Wu, A. Z. Chen, Z. Qian, and D. Wildman, “Design of a New Main Injector Cavity for the Fermilab Proton Driver Era”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT028, pp. 2015-2017.
- W. Barletta, “Design of the Vacuum System for the High Energy Ring of an Asymmetric B-factroy Based on PEP”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2310-2313.
- E. Syresin et al., “NICA Ion Coolider at JINR”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 12-16.
- C. Pellegrini et al., “A High Luminosity Superconducting Mini Collider for Phi Meson Production and Particle Beam Physics”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2856-2859.
- E. Syresin et al., “SASE Gain-Curve Measurements with MCP-Based Detectors at the European XFEL”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 96-98.
- N. Hiller et al., “Maximizing the hard-X-ray performance of SwissFEL by systematic re-alignment and recalibration of the Aramis undulator line”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB028, pp. 122-125.
- C. Milardi et al., “CTF3 Compressor System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI057, pp. 416-418.
- T. E. Oseroff, M. Liepe, and Z. Sun, “Sample Test Systems for Next-Gen SRF Surfaces”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 357.
- N. Banerjee, A. Romanov, A. Valishev, G. Stancari, J. Wieland, and N. Kuklev, “Experimental verification of integrability in a Danilov-Nagaitsev lattice using machine learning”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS67, pp. 878-881.
- J. Yang et al., “Photocathode Femtosecond Electron Beam Applications: Femtosecond Pulse Radiolysis and Femtosecond Electron Diffraction”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC029, pp. 4113-4115.
- M. Bousonville et al., “European XFEL High-Power RF System - the First 4 Years of Operation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2708-2710.
- V. Vlachodimitropoulos, M. J. Barnes, A. Chmielinska, L. Ducimeti?¿re, L. Vega Cid, and W. J. M. Weterings, “Studies Towards the New Beam Screen System of the LHC Injection Kicker Magnet for HL-LHC Operation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3982-3985.
- D. Reistad, B. G?Ñlnander, K. Rathsman, and A. O. Sidorin, “Calculations on High-energy Electron Cooling in the HESR”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper MOA2C05, pp. 44-48.
- M. Zhou et al., “Modeling Self-Ionized Plasma Wakefield Acceleration for Afterburner Parameters Using QuickPIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE046, pp. 2905-2907.
- M. Koratzinos, “CEPC Design Performance Considerations”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THT4A2, pp. 22-26.
- K. A. Brown, P. Chitnis, C. Theisen, and G. Wang, “Machine Protection Issues for eRHIC”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA03, pp. 914-917.
- T. H. Nicol et al., “Cryomodule Design for 325 MHz Superconducting Single Spoke Cavities and Solenoids”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP079, pp. 970-972.
- L. H. J. Bozyk, D. H. H. Hoffmann, H. Kollmus, and P. J. Spiller, “Development of a Cryocatcher Prototype for SIS100”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC078, pp. 4238-4240.
- K. Shih et al., “Demonstration of time-resolved diagnostic in coherent electron cooling pop experiment”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG11, pp. 2203-2205.
- P. D. Hermes, K. A. Dewhurst, A. S. Fomin, D. Mirarchi, and S. Redaelli, “Layouts for Feasibility Studies of Fixed-Target Experiments at the LHC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2134-2137.
- S.-Y. Chen et al., “Externally Controlled Injection of Electrons by a Laser Pulse in a Laser Wakefield Electron Accelerator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE064, pp. 3644-3646.
- D. Y. Chen et al., “Simulation of Broadband Laser Cooling of Relativistic Ion Beams at the Csre”, presented at the 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP19, unpublished.
- E. Acerbi, G. C. Rivoltella, L. Rossi, and G. Raia, “The Beam Diagnostics of the Milan K800 Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-03, pp. 283-286.
- J. C. Jan et al., “Design of a 3.5 T Superconducting Multipole Wiggler”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3564-3567.
- N. Winters and E. Rosi, “FAIR Project Management”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP8033, this conference.
- C. Limborg, J. E. Clendenin, D. H. Dowell, S. Gierman, and J. Schmerge, “New Optimization for the LCLS Photo-injector”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI041, pp. 1789-1791.
- W. Barry et al., “Design of the PEP-II Transverse Coupled-Bunch Feedback System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ08, pp. 2681-2683.
- E. A. Knapp, A. Carne, G. D??me, S. T. Giordano, C. W. Owen, and D. A. Swenson, “Round Table Discussion of RF Structures”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper F-15, pp. 583-599.
- F. Schmidt, Y. Alexahin, V. A. Lebedev, D. Still, and A. Valishev, “Measurement and Correction of the 3rd Order Resonance in the Tevatron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH096, pp. 2140-2142.
- A. V. Butenko et al., “Commissioning of New Light Ion RFQ Linac and First Nuclotron Run with New Injector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2366-2368.
- T. J. Bian, S. An, F. P. Guan, L. Y. Ji, and S. M. Wei, “Feasibility Study on 10 MW-Class Ultra-High Power Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper FRAO02, pp. 359-363.
- Z. H. Bai, W. Li, L. Wang, and P. H. Yang, “Design Study for the First Version of the HALS Lattice”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2713-2715.
- G. R. Werner and J. R. Cary, “Designing Photonic Crystal Devices for Accelerators”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE051, pp. 3164-3166.
- T. Zwart et al., “Test of a Fast Ferrite Reactive Tuner for Control of Microphonics at the S-Dalinac”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT095, unpublished.
- A. Seibel et al., “Welding and Copper Plating Investigations on the FAIR Proton Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 345-347.
- F. Rosatelli et al., “Design, Manufacturing and First Measurements of a Hybrid Permanent Magnet Undulator for Free Electron Laser”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2760-2763.
- R. Niemczyk et al., “Experimental Slice Emittance Reduction at PITZ Using Laser Pulse Shaping”, presented at the 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, paper THOYGD2, unpublished.
- A. Fornara, G. Sterbini, and M. Giovannozzi, “Current classification strategies based on the transfer function and field quality of the new superconducting magnets in the HL-LHC”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5068, this conference.
- J. M. Liu et al., “Research and Development Progress of CEPC RF Shield Bellows”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 142-144.
Back to search