Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Wu, D. Barber, F. Carlier, E. Gianfelice-Wendt, T. Pieloni, and L. van Riesen-Haupt, “Spin-polarization simulations for the Future Circular Collider e+e- using Bmad”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 670-673. doi:10.18429/JACoW-IPAC2023-MOPL055
[n] A. Ijspeert and L. Vos, “Control of Background Rates in the Underground Physics Experiments at the CERN SPS Proton Antiproton Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1635-1638.
[n] S. C. Schaller et al., “Completion of the LANSCE Proton Storage Ring Control System Upgrade - A Successful Integration of EPICS into a Running Control System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P045, pp. 2464-2466.
[n] M. Watanabe et al., “Operation of Kicker System using Thyratron of the 3 GeV Rapid Cycling Synchrotron of J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD086, pp. 3296-3298.
[n] P. Saha et al., “Status of the laser manipulations of H- beam at J-PARC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2335-2338. doi:10.18429/JACoW-IPAC2023-TUPM062
[n] K. Takayama, “Progress in induction synchrotrons”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAY01, pp. XX-XX.
[n] J. Beebe-Wang, Y. Y. Lee, D. Raparia, and J. Wei, “Injection Carbon Stripping Foil Issues in the SNS Accumulator Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH128, pp. 1508-1510.
[n] Y. Watanabe, “Suppression Scheme of COD Variation Caused by Switching Ripple in J-PARC 3GeV Dipole Magnet Power Supply”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD063, pp. 3242-3244.
[n] Y. Jongen and G. Ryckewaert, “Initial Operation of E.C.R. Ion Sources with CYCLONE”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2685-2690.
[n] Y. Jongen and G. Ryckewaert, “Preliminary Design for a 30 MeV, 500 muA H- Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2703-2706.
[n] S. Ahmadiannamin, J.-B. Lagrange, and A. Letchford, “500 MeV normal conducting injector design for ISIS_II neutron and muon facility”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4036, unpublished.
[n] S. Ahmadiannamin and J.-B. Lagrange, “Optimized low-cost, high-efficiency cavity design for 100–500 MeV proton linacs”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7019, unpublished.
[n] D. Raparia, “RFQ-DTL Matching Solutions for Different Requirements”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR16, pp. 3385-3387.
[n] V. Ovchar, E. Kuper, and G.-J. Coelingh, “ARC DETECTOR SYSTEM FOR EXTRACTION SWITCHES IN LHC CERN”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MODP24, pp. XX-XX.
[n] M. Satoh et al., “KEK electron/positron injector LINAC control system”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 645-651. doi:10.18429/JACoW-ICALEPCS2025-TUPD058
[n] J. M. Arnesano and S. Döbert, “Design of an X-Band Bunching and Accelerating System for AWAKE Run 2”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 458-461. doi:10.18429/JACoW-LINAC2022-TUPOPA24
[n] D. Raparia, Y. Y. Lee, J. Wei, and W. T. Weng, “Dependence of the SNS Transfer Lines and Accumulator Ring on Linac Energy”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH018, pp. 3260-3262.
[n] I. Yamada, J. Kamiya, M. Kinsho, and M. Chimura, “Observation of beam emittance reduction due to gas sheet injection for beam profile measurement”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4739-4742. doi:10.18429/JACoW-IPAC2023-THPL116
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Wu, D. Barber, F. Carlier, E. Gianfelice-Wendt, T. Pieloni, and L. van Riesen-Haupt, “Spin-polarization simulations for the Future Circular Collider e+e- using Bmad”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL055, pp. 670-673.
- A. Ijspeert and L. Vos, “Control of Background Rates in the Underground Physics Experiments at the CERN SPS Proton Antiproton Collider”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1635-1638.
- S. C. Schaller et al., “Completion of the LANSCE Proton Storage Ring Control System Upgrade - A Successful Integration of EPICS into a Running Control System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P045, pp. 2464-2466.
- M. Watanabe et al., “Operation of Kicker System using Thyratron of the 3 GeV Rapid Cycling Synchrotron of J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD086, pp. 3296-3298.
- P. Saha et al., “Status of the laser manipulations of H- beam at J-PARC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM062, pp. 2335-2338.
- K. Takayama, “Progress in induction synchrotrons”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THAY01, pp. XX-XX.
- J. Beebe-Wang, Y. Y. Lee, D. Raparia, and J. Wei, “Injection Carbon Stripping Foil Issues in the SNS Accumulator Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH128, pp. 1508-1510.
- Y. Watanabe, “Suppression Scheme of COD Variation Caused by Switching Ripple in J-PARC 3GeV Dipole Magnet Power Supply”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD063, pp. 3242-3244.
- Y. Jongen and G. Ryckewaert, “Initial Operation of E.C.R. Ion Sources with CYCLONE”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2685-2690.
- Y. Jongen and G. Ryckewaert, “Preliminary Design for a 30 MeV, 500 muA H- Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2703-2706.
- S. Ahmadiannamin, J.-B. Lagrange, and A. Letchford, “500 MeV normal conducting injector design for ISIS_II neutron and muon facility”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4036, this conference.
- S. Ahmadiannamin and J.-B. Lagrange, “Optimized low-cost, high-efficiency cavity design for 100–500 MeV proton linacs”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7019, this conference.
- D. Raparia, “RFQ-DTL Matching Solutions for Different Requirements”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR16, pp. 3385-3387.
- V. Ovchar, E. Kuper, and G.-J. Coelingh, “ARC DETECTOR SYSTEM FOR EXTRACTION SWITCHES IN LHC CERN”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MODP24, pp. XX-XX.
- M. Satoh et al., “KEK electron/positron injector LINAC control system”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 645-651.
- J. M. Arnesano and S. Döbert, “Design of an X-Band Bunching and Accelerating System for AWAKE Run 2”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 458-461.
- D. Raparia, Y. Y. Lee, J. Wei, and W. T. Weng, “Dependence of the SNS Transfer Lines and Accumulator Ring on Linac Energy”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH018, pp. 3260-3262.
- I. Yamada, J. Kamiya, M. Kinsho, and M. Chimura, “Observation of beam emittance reduction due to gas sheet injection for beam profile measurement”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL116, pp. 4739-4742.
Back to search
