Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. A. Lewis, C. A. Lionberger, and P. T. Cull, “Status of the Control System for the Front-End of the Spallation Neutron Source”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP026, pp. XX-XX.
[n] M. Awschalom, T. Borak, H. Howe, F. Schamber, R. Shafer, and D. Theriot, “Novel Instrumentation for Radiation Monitoring at NAL”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 748-750.
[n] P. J. Lee et al., “Grain Boundary Flux Penetration and Resistivity in Large Grain Niobium Sheet”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP54, pp. 372-374.
[n] J. Peters, “RF-Tuning of the HERA Linac 3 Alvarez Structures”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-50, pp. 170-172.
[n] X. H. Chen and K.-U. Kasemir, “Bringing Control System User Interfaces to the Web”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB03, pp. 1048-1051.
[n] L. C. Teng, “High Efficiency Buncher for Linac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D07, pp. 213-216.
[n] J. Peters, “The Status of DESY H- Sources”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP55, pp. 199-201.
[n] J. Naylon and D. K. Kramer, “Development of a High-speed Diagnostics Package for the 0.2 J, 20 fs, 1 kHz Repetition Rate Laser at ELI Beamlines”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC039, pp. 646-649.
[n] R. Muto et al., “Simulation-Based Optimization of a Bent Silicon Crystal for Beam Loss Reduction in the J-PARC Main Ring Slow Extraction”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4649, unpublished.
[n] S. M. Hartman, “SNS Instrument Data Acquisition and Controls”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC076, pp. 755-758.
[n] Z. Wu, R. J. England, R. J. Noble, E. A. Peralta, K. Soong, and M. Qi, “Silica Rod Array for Laser Driven Particle Acceleration”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC33, pp. 141-143.
[n] W. Zhang, W. Eng, C. Pai, J. Sandberg, Y. Tan, and Y. Tian, “A Simplified Approach to Analyze and Model Inductive Voltage Adder”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS092, pp. 2553-2555.
[n] H. Bluem et al., “First Lasing from a High Power Cylindrical Grating Smith-Purcell Device”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper WEA04, pp. 611-614.
[n] C. Gaspar et al., “The LHCb Experiment Control System: on the Path to Full Automation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOBAUST06, pp. 20-23.
[n] O. C. Dermois, “The External Injection System for the Groningen Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69G04, pp. XX-XX.
[n] D. K. Kramer, B. Dehning, G. Ferioli, and E. B. Holzer, “Secondary Electron Emission Beam Loss Monitor for LHC”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC03, pp. 313-315.
[n] S. Dewan et al., “1400A,+/-900V Peak Pulse Switch Mode Power Supplies for SNS Injection Kickers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE015, pp. 770-772.
[n] X. H. Chen and K.-U. Kasemir, “BOY, A Modern Graphical Operator Interface Editor and Runtime”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOBN3, pp. 1404-1406.
[n] T. J. Shea, J. Brodowski, and R. Witkover, “Beam Position Monitoring in the AGS Linac to Booster Transfer Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1428-1431.
[n] H. Frese et al., “First Experience with the PETRA Control System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3379-3382.
[n] S. Deveaux and F. Becker, “FAIR Risk Management as a Proactive Steering Tool for the Large Scale Multi Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 839-841. doi:10.18429/JACoW-IPAC2017-MOPIK127
[n] G.-T. Park, J. Guo, F. Marhauser, R. A. Rimmer, H. Wang, and S. Wang, “Beam Impedance Study on a Harmonic Kicker for the CCR of JLEIC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 116-119. doi:10.18429/JACoW-ERL2019-WEPNEC22
For LaTeX
Use Complete Form
For BibTeX
References
- S. A. Lewis, C. A. Lionberger, and P. T. Cull, “Status of the Control System for the Front-End of the Spallation Neutron Source”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP026, pp. XX-XX.
- M. Awschalom, T. Borak, H. Howe, F. Schamber, R. Shafer, and D. Theriot, “Novel Instrumentation for Radiation Monitoring at NAL”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 748-750.
- P. J. Lee et al., “Grain Boundary Flux Penetration and Resistivity in Large Grain Niobium Sheet”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP54, pp. 372-374.
- J. Peters, “RF-Tuning of the HERA Linac 3 Alvarez Structures”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-50, pp. 170-172.
- X. H. Chen and K.-U. Kasemir, “Bringing Control System User Interfaces to the Web”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB03, pp. 1048-1051.
- L. C. Teng, “High Efficiency Buncher for Linac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper D07, pp. 213-216.
- J. Peters, “The Status of DESY H- Sources”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP55, pp. 199-201.
- J. Naylon and D. K. Kramer, “Development of a High-speed Diagnostics Package for the 0.2 J, 20 fs, 1 kHz Repetition Rate Laser at ELI Beamlines”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC039, pp. 646-649.
- R. Muto et al., “Simulation-Based Optimization of a Bent Silicon Crystal for Beam Loss Reduction in the J-PARC Main Ring Slow Extraction”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4649, this conference.
- S. M. Hartman, “SNS Instrument Data Acquisition and Controls”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC076, pp. 755-758.
- Z. Wu, R. J. England, R. J. Noble, E. A. Peralta, K. Soong, and M. Qi, “Silica Rod Array for Laser Driven Particle Acceleration”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC33, pp. 141-143.
- W. Zhang, W. Eng, C. Pai, J. Sandberg, Y. Tan, and Y. Tian, “A Simplified Approach to Analyze and Model Inductive Voltage Adder”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS092, pp. 2553-2555.
- H. Bluem et al., “First Lasing from a High Power Cylindrical Grating Smith-Purcell Device”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper WEA04, pp. 611-614.
- C. Gaspar et al., “The LHCb Experiment Control System: on the Path to Full Automation”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOBAUST06, pp. 20-23.
- O. C. Dermois, “The External Injection System for the Groningen Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69G04, pp. XX-XX.
- D. K. Kramer, B. Dehning, G. Ferioli, and E. B. Holzer, “Secondary Electron Emission Beam Loss Monitor for LHC”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC03, pp. 313-315.
- S. Dewan et al., “1400A,+/-900V Peak Pulse Switch Mode Power Supplies for SNS Injection Kickers”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE015, pp. 770-772.
- X. H. Chen and K.-U. Kasemir, “BOY, A Modern Graphical Operator Interface Editor and Runtime”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOBN3, pp. 1404-1406.
- T. J. Shea, J. Brodowski, and R. Witkover, “Beam Position Monitoring in the AGS Linac to Booster Transfer Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1428-1431.
- H. Frese et al., “First Experience with the PETRA Control System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3379-3382.
- S. Deveaux and F. Becker, “FAIR Risk Management as a Proactive Steering Tool for the Large Scale Multi Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 839-841.
- G.-T. Park, J. Guo, F. Marhauser, R. A. Rimmer, H. Wang, and S. Wang, “Beam Impedance Study on a Harmonic Kicker for the CCR of JLEIC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 116-119.
Back to search