Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Yee-Rendon et al., “Machine Protection Studies for a Crab Cavity in the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO010, pp. 906-908.
[n] K. Bongardt, M. Pabst, and A. Letchford, “High Intensity Injector Linacs for Spallation Sources”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU1002, pp. 339-343.
[n] A. Oeftiger, S. Hancock, and G. Rumolo, “Space Charge Mitigation With Longitudinally Hollow Bunches”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 130-135. doi:10.18429/JACoW-HB2016-MOPR026
[n] P. Zisopoulos, J. Dilly, E. Maclean, and M. Stefanelli, “Optics Characterization and Resonance Driving Term Studies for the SPS Crab Cavity Tests in 2025”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5039, unpublished.
[n] R. Wehrle, S. Kim, and R. Nielsen, “Vacuum System Development Status for the APS Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 583-586.
[n] J. Susta, “Development in Fabrication Methods”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-32, pp. XX-XX.
[n] G. S. Kerslick, Cz. Golkowski, J. D. Ivers, J. A. Nation, and I. S. Roth, “Confinement of a High Current Proton Beam in a Linear Induction Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 928-931.
[n] H. Vormann, A. Schempp, U. Bessler, A. Letchford, and C. W. Planner, “Design of a High Current RFQ Injector with High Duty Factor”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4012, pp. 791-793.
[n] L. Calabretta et al., “Beam-Chopping System for LNS Superconducting Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-34, pp. 275-278.
[n] L. F. Li and C. H. Wang, “A Web Based Realtime Monitor on EPICS Data”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN014, pp. 121-123.
[n] Y. Cho et al., “A 1- to 5-MW, RCS-Based, Short-Pulse Spallation Neutron Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8B011, pp. 953-955.
[n] U. Schaaf et al., “Impedances and Instability Studies at the ESR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 123-126.
[n] B. Franzke et al., “Performance of the Heavy Ion Storage Ring ESR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 444-447.
[n] J. Keintzel et al., “Defining the new FCC-ee baseline optics”, presented at the IPAC'26, Deauville, France, May 2026, paper WEV1001, unpublished.
[n] G. Gulbekyan et al., “Beam Lines For Physical Experiments Of Dc-350 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 355-357.
[n] M. Jenkins and I. R. Bailey, “Novel Designs for Undulator Based Positron Sources”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD036, pp. 1485-1487.
[n] A. Marsili, E. B. Holzer, and P. M. Puzo, “LHC Beam Loss Pattern Recognition”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC141, pp. 1353-1355.
[n] Q.-Sh. Shu, G. Cheng, and J. Susta, “Five Projects of High RF Power Input Couplers and Windows for SRF Accelerators”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP34, pp. 706-710.
[n] M. Wang et al., “Study of Dislocation Content Near Grain Boundaries using Electron Channeling Contrast Imaging and its Effect on Superconducting Properties of Niobium”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 876-880. doi:10.18429/JACoW-SRF2019-THP020
[n] E. Benedetto, G. Franchetti, G. Rumolo, and F. Zimmermann, “Resonance Trapping, Halo Formation and Incoherent Emittance Growth due to Electron Cloud”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH018, pp. 2820-2822.
[n] J. M. D et al., “Research and Development Studies with Radioactive Beams at TRIUMF”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XIII-08, pp. 745-748.
[n] Y. A. Fomin, V. Korchuganov, S. I. Tomin, and A. G. Valentinov, “Short Bunch Operation Mode Development at the Synchrotron Radiation Source Siberia-2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3305-3307. doi:10.18429/JACoW-IPAC2016-THPMB034
[n] S. K. Suhane et al., “Engineering Design of Vertical Test Stand Cryostat”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP033, pp. 874-876.
[n] F. Becker et al., “Establishing a Project Management Office for the Large Scale Multi Project FAIR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 835-838. doi:10.18429/JACoW-IPAC2017-MOPIK126
[n] M. P. J. Gaudreau, J. A. Casey, T. Hawkey, M. A. Kempkes, J. M. Mulvaney, and I. S. Roth, “Solid-State Pulsed Power Systems for the Next Linear Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC005, pp. 547-549.
[n] J. Duke and A. Letchford, “Design of an Electrostatic Energy Separator for the ISIS RFQ Test Stand”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA148, pp. 2208-2210.
[n] B. Dwersteg et al., “Beam Test of a 9-Cell Superconducting Cavity in the PETRA Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3596-3599.
[n] N. Winters, F. Becker, and M. V. Ricciardi, “Integrated Project Planning as a Central Steering Tool for the Large Scale Multi Project FAIR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 842-844. doi:10.18429/JACoW-IPAC2017-MOPIK128
[n] Z. Wu, E. R. Colby, C. McGuinness, and C.-K. Ng, “Design of On-Chip Power Transport and Coupling Components for a Silicon Woodpile Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP072, pp. 241-243.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Yee-Rendon et al., “Machine Protection Studies for a Crab Cavity in the LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO010, pp. 906-908.
- K. Bongardt, M. Pabst, and A. Letchford, “High Intensity Injector Linacs for Spallation Sources”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU1002, pp. 339-343.
- A. Oeftiger, S. Hancock, and G. Rumolo, “Space Charge Mitigation With Longitudinally Hollow Bunches”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 130-135.
- P. Zisopoulos, J. Dilly, E. Maclean, and M. Stefanelli, “Optics Characterization and Resonance Driving Term Studies for the SPS Crab Cavity Tests in 2025”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5039, this conference.
- R. Wehrle, S. Kim, and R. Nielsen, “Vacuum System Development Status for the APS Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 583-586.
- J. Susta, “Development in Fabrication Methods”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-32, pp. XX-XX.
- G. S. Kerslick, Cz. Golkowski, J. D. Ivers, J. A. Nation, and I. S. Roth, “Confinement of a High Current Proton Beam in a Linear Induction Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 928-931.
- H. Vormann, A. Schempp, U. Bessler, A. Letchford, and C. W. Planner, “Design of a High Current RFQ Injector with High Duty Factor”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4012, pp. 791-793.
- L. Calabretta et al., “Beam-Chopping System for LNS Superconducting Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-34, pp. 275-278.
- L. F. Li and C. H. Wang, “A Web Based Realtime Monitor on EPICS Data”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN014, pp. 121-123.
- Y. Cho et al., “A 1- to 5-MW, RCS-Based, Short-Pulse Spallation Neutron Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8B011, pp. 953-955.
- U. Schaaf et al., “Impedances and Instability Studies at the ESR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 123-126.
- B. Franzke et al., “Performance of the Heavy Ion Storage Ring ESR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 444-447.
- J. Keintzel et al., “Defining the new FCC-ee baseline optics”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEV1001, this conference.
- G. Gulbekyan et al., “Beam Lines For Physical Experiments Of Dc-350 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 355-357.
- M. Jenkins and I. R. Bailey, “Novel Designs for Undulator Based Positron Sources”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD036, pp. 1485-1487.
- A. Marsili, E. B. Holzer, and P. M. Puzo, “LHC Beam Loss Pattern Recognition”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC141, pp. 1353-1355.
- Q.-Sh. Shu, G. Cheng, and J. Susta, “Five Projects of High RF Power Input Couplers and Windows for SRF Accelerators”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP34, pp. 706-710.
- M. Wang et al., “Study of Dislocation Content Near Grain Boundaries using Electron Channeling Contrast Imaging and its Effect on Superconducting Properties of Niobium”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 876-880.
- E. Benedetto, G. Franchetti, G. Rumolo, and F. Zimmermann, “Resonance Trapping, Halo Formation and Incoherent Emittance Growth due to Electron Cloud”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH018, pp. 2820-2822.
- J. M. D et al., “Research and Development Studies with Radioactive Beams at TRIUMF”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XIII-08, pp. 745-748.
- Y. A. Fomin, V. Korchuganov, S. I. Tomin, and A. G. Valentinov, “Short Bunch Operation Mode Development at the Synchrotron Radiation Source Siberia-2”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3305-3307.
- S. K. Suhane et al., “Engineering Design of Vertical Test Stand Cryostat”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP033, pp. 874-876.
- F. Becker et al., “Establishing a Project Management Office for the Large Scale Multi Project FAIR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 835-838.
- M. P. J. Gaudreau, J. A. Casey, T. Hawkey, M. A. Kempkes, J. M. Mulvaney, and I. S. Roth, “Solid-State Pulsed Power Systems for the Next Linear Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC005, pp. 547-549.
- J. Duke and A. Letchford, “Design of an Electrostatic Energy Separator for the ISIS RFQ Test Stand”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA148, pp. 2208-2210.
- B. Dwersteg et al., “Beam Test of a 9-Cell Superconducting Cavity in the PETRA Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3596-3599.
- N. Winters, F. Becker, and M. V. Ricciardi, “Integrated Project Planning as a Central Steering Tool for the Large Scale Multi Project FAIR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 842-844.
- Z. Wu, E. R. Colby, C. McGuinness, and C.-K. Ng, “Design of On-Chip Power Transport and Coupling Components for a Silicon Woodpile Accelerator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP072, pp. 241-243.
Back to search