Favourites
For Word
[n] M. Giovannozzi et al., “Non-linear Beam Dynamics Tests at the CERN PS in the Framework of the Multi-turn Extraction”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC082, pp. 1365-1367.
[n] M. Kanazawa et al., “Acceleration of Multiple-Charged Ions at HIMAC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP49C, pp. 535-537.
[n] H. Boer Rookhuizen, J. Bijleveld, G. Luijckx, R. Maas, Y. Wu, and A. van der Linden, “Magnetic Devices of the Amsterdam Pulse Strecher Ring AmPS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2366-2369.
[n] J. L. Abelleira et al., “Painting Schemes for CERN PS Booster H- Injection”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3879-3882. doi:10.18429/JACoW-IPAC2015-THPF083
[n] M. Ady and R. Kersevan, “Introduction to the Latest Version of the Test-particle Monte Carlo Code Molflow+”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2348-2350. doi:10.18429/JACoW-IPAC2014-WEPME038
[n] B. C. Kuske and M. McAteer, “Adjusting BERLinPro Optics to Commissioning Needs”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 165-170. doi:10.18429/JACoW-ERL2019-FRCOXBS05
[n] D. T. Robinson et al., “LCLS-II Cryomodule and Cryogenic Distribution Control”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1072. doi:10.18429/JACoW-ICALEPCS2019-WEPHA002
[n] R. Kersevan, V. Baglin, and G. Bregliozzi, “Coupled Simulations of the Synchrotron Radiation and Induced Desorption Pressure Profiles for the HiLumi-LHC Triplet Area and Interaction Points”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2381-2383. doi:10.18429/JACoW-IPAC2014-WEPME049
[n] G. Skripka, P. F. Tavares, M. Klein, and R. Nagaoka, “Transverse Beam Instabilities in the MAX IV 3 GeV ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1689-1691. doi:10.18429/JACoW-IPAC2014-TUPRI053
[n] R. Kersevan, C. Garion, and N. Kos, “Preliminary Design of the HiLumi-LHC Triplet Area Beam Screen”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2378-2380. doi:10.18429/JACoW-IPAC2014-WEPME048
[n] M. Kleinmann, R. Eichhorn, F. Hug, and N. Pietralla, “Upgrade Plans on the Superconducting Electron Accelerator S-DALINAC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC006, pp. 2010-2012.
[n] E. Schneidmiller et al., “Two-Color Operation of FLASH2 Undulator”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 168-171. doi:10.18429/JACoW-FEL2019-TUP055
[n] M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
[n] J. L. Abelleira and F. Zimmermann, “Matching Antisymmetric Arc Optics to Symmetric Interaction Region”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI043, pp. 1445-1447.
[n] R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, Z. Y. Yao, and V. Zvyagintsev, “Fundamental Power Coupler Design for a 325 MHz Balloon SSR Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 252-254. doi:10.18429/JACoW-SRF2019-MOP076
[n] H. Bartosik et al., “Beam Dynamics Observations of the 2015 High Intensity Scrubbing Runs at the Cern Sps”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 648-651. doi:10.18429/JACoW-IPAC2016-MOPOR022
[n] V. Lazarev et al., “Technical Overview of the SIEMENS Particle Therapy Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS066, pp. 3577-3579.
[n] B. Ng et al., “Control System for the MLI Model 1.2-400 Sychrotron Light Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1371-1374.
[n] I. B. Issinsky, V. A. Mikhailov, and V. A. Shchepunov, “Magnetic Field Correction in Nuclotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAC12, pp. 2863-2865.
[n] E.-S. Kim, J. G. Hwang, and H. J. Kim, “Design Study for a Hard X-ray Generation by Using High Harmonic Generation Free Electron Laser”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA04, pp. 337-340.
[n] A. Palaia, M. Jacewicz, T. Muranaka, J. M. Y. Ruber, V. G. Ziemann, and W. Farabolini, “RF-breakdown Kicks at the CTF3 Two-beam Test Stand”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB001, pp. 73-75.
[n] A. Dubrovskiy, F. Tecker, M. Jacewicz, J. M. Y. Ruber, and V. G. Ziemann, “Flashbox Compact Beam Spectrometer and its Application to the High-gradient Acceleration Study”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA038, pp. 753-755.
[n] X. W. Wu, H. B. Chen, J. Shi, T. Higo, S. Matsumoto, and W. Wuensch, “High Gradient Properties of a CLIC Prototype Accelerating Structure made by Tsinghua University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3874-3877. doi:10.18429/JACoW-IPAC2016-THPOR041
[n] F. Zhou, H. K. Ho, D. Cline, and B. Liu, “A Proposal to Experimentally Demonstrate the Novel Vacuum Laser Acceleration”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI071, pp. 1004-1006.
[n] S. Hatakeyama, “Various Methods to Measure the Betatron Tune of the Synchrotoron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR030, pp. 843-845.
[n] S. L. Hoobler, S. C. Alverson, C. Cyterski, and R. C. Sass, “Upgrades to Control Room Knobs at Slac National Accelerator Laboratory”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 177-179. doi:10.18429/JACoW-ICALEPCS2015-MOPGF037
[n] J. Shi et al., “New Quantity Describing the Pulse Shape Dependence of the High Gradient Limit in Single Cell Standing-Wave Accelerating Structures”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3878-3880. doi:10.18429/JACoW-IPAC2016-THPOR042
[n] T. Kamps et al., “Setup and Status of an SRF Photoinjector for Energy-Recovery Linac Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 865-868. doi:10.18429/JACoW-IPAC2017-MOPVA010
[n] M. Koratzinos, A. P. Blondel, E. Gianfelice-Wendt, and F. Zimmermann, “FCC-ee: Energy Calibration”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2177-2180. doi:10.18429/JACoW-IPAC2015-TUPTY063
[n] C. P. Stoll and F. Hug, “Beam Breakup Limit Estimations and Higher Order Mode Characterisation for MESA”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 134-137. doi:10.18429/JACoW-ERL2019-THCOWBS06
[n] A. N. Skrinsky and T. V. Zolkin, “Usage of Li-rods for Ionization Cooling of Muons”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP062, pp. 226-228.
[n] J. H. Wang et al., “Bunch-by-Bunch Online Diagnostics at HLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC138, pp. 3309-3311.
[n] J. E. Spencer et al., “Fast Neutron Radioactivity and Damage Studies on Materials”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS066, pp. 581-583.
[n] B. Goddard et al., “Possible Reuse of the LHC as a 3.3 TeV High Energy Booster for Hadron Injection into the FCC-hh Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3919-3922. doi:10.18429/JACoW-IPAC2015-THPF094
[n] T. Schmidt and S. Reiche, “Undulators for the SwissFEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper THOA01, pp. 706-713.
[n] D. Iglesias et al., “Thermo-mechanical Design of Particle-stopping Devices at the High Energy Beamline Sections of the IFMIF/EVEDA Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS059, pp. 3562-3564.
[n] R. Kazimi et al., “Observation and Mitigation of Multipass BBU in CEBAF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP087, pp. 2722-2724.
[n] P. K. Skowronski et al., “Experimental Verification of the CLIC Two-Beam Acceleration Technology in CTF3”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI040, pp. 1436-1438.
[n] S. L. Hoobler et al., “Design and Commissioning Results of MicroTCA Stripline BPM System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 180-183. doi:10.18429/JACoW-ICALEPCS2015-MOPGF038
[n] M. Gu, R. Chen, Z. H. Chen, G.-Y. Jiang, R. Wang, and Q. Yuan, “In-Vacuum Undulator Controller Design for SSRF”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD034, pp. 3168-3170.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Giovannozzi et al., “Non-linear Beam Dynamics Tests at the CERN PS in the Framework of the Multi-turn Extraction”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC082, pp. 1365-1367.
- M. Kanazawa et al., “Acceleration of Multiple-Charged Ions at HIMAC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP49C, pp. 535-537.
- H. Boer Rookhuizen, J. Bijleveld, G. Luijckx, R. Maas, Y. Wu, and A. van der Linden, “Magnetic Devices of the Amsterdam Pulse Strecher Ring AmPS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2366-2369.
- J. L. Abelleira et al., “Painting Schemes for CERN PS Booster H- Injection”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3879-3882.
- M. Ady and R. Kersevan, “Introduction to the Latest Version of the Test-particle Monte Carlo Code Molflow+”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2348-2350.
- B. C. Kuske and M. McAteer, “Adjusting BERLinPro Optics to Commissioning Needs”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 165-170.
- D. T. Robinson et al., “LCLS-II Cryomodule and Cryogenic Distribution Control”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1072.
- R. Kersevan, V. Baglin, and G. Bregliozzi, “Coupled Simulations of the Synchrotron Radiation and Induced Desorption Pressure Profiles for the HiLumi-LHC Triplet Area and Interaction Points”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2381-2383.
- G. Skripka, P. F. Tavares, M. Klein, and R. Nagaoka, “Transverse Beam Instabilities in the MAX IV 3 GeV ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1689-1691.
- R. Kersevan, C. Garion, and N. Kos, “Preliminary Design of the HiLumi-LHC Triplet Area Beam Screen”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2378-2380.
- M. Kleinmann, R. Eichhorn, F. Hug, and N. Pietralla, “Upgrade Plans on the Superconducting Electron Accelerator S-DALINAC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC006, pp. 2010-2012.
- E. Schneidmiller et al., “Two-Color Operation of FLASH2 Undulator”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 168-171.
- M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
- J. L. Abelleira and F. Zimmermann, “Matching Antisymmetric Arc Optics to Symmetric Interaction Region”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI043, pp. 1445-1447.
- R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, Z. Y. Yao, and V. Zvyagintsev, “Fundamental Power Coupler Design for a 325 MHz Balloon SSR Cavity”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 252-254.
- H. Bartosik et al., “Beam Dynamics Observations of the 2015 High Intensity Scrubbing Runs at the Cern Sps”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 648-651.
- V. Lazarev et al., “Technical Overview of the SIEMENS Particle Therapy Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS066, pp. 3577-3579.
- B. Ng et al., “Control System for the MLI Model 1.2-400 Sychrotron Light Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1371-1374.
- I. B. Issinsky, V. A. Mikhailov, and V. A. Shchepunov, “Magnetic Field Correction in Nuclotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAC12, pp. 2863-2865.
- E.-S. Kim, J. G. Hwang, and H. J. Kim, “Design Study for a Hard X-ray Generation by Using High Harmonic Generation Free Electron Laser”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA04, pp. 337-340.
- A. Palaia, M. Jacewicz, T. Muranaka, J. M. Y. Ruber, V. G. Ziemann, and W. Farabolini, “RF-breakdown Kicks at the CTF3 Two-beam Test Stand”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOEPPB001, pp. 73-75.
- A. Dubrovskiy, F. Tecker, M. Jacewicz, J. M. Y. Ruber, and V. G. Ziemann, “Flashbox Compact Beam Spectrometer and its Application to the High-gradient Acceleration Study”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA038, pp. 753-755.
- X. W. Wu, H. B. Chen, J. Shi, T. Higo, S. Matsumoto, and W. Wuensch, “High Gradient Properties of a CLIC Prototype Accelerating Structure made by Tsinghua University”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3874-3877.
- F. Zhou, H. K. Ho, D. Cline, and B. Liu, “A Proposal to Experimentally Demonstrate the Novel Vacuum Laser Acceleration”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI071, pp. 1004-1006.
- S. Hatakeyama, “Various Methods to Measure the Betatron Tune of the Synchrotoron”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR030, pp. 843-845.
- S. L. Hoobler, S. C. Alverson, C. Cyterski, and R. C. Sass, “Upgrades to Control Room Knobs at Slac National Accelerator Laboratory”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 177-179.
- J. Shi et al., “New Quantity Describing the Pulse Shape Dependence of the High Gradient Limit in Single Cell Standing-Wave Accelerating Structures”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3878-3880.
- T. Kamps et al., “Setup and Status of an SRF Photoinjector for Energy-Recovery Linac Applications”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 865-868.
- M. Koratzinos, A. P. Blondel, E. Gianfelice-Wendt, and F. Zimmermann, “FCC-ee: Energy Calibration”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2177-2180.
- C. P. Stoll and F. Hug, “Beam Breakup Limit Estimations and Higher Order Mode Characterisation for MESA”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 134-137.
- A. N. Skrinsky and T. V. Zolkin, “Usage of Li-rods for Ionization Cooling of Muons”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP062, pp. 226-228.
- J. H. Wang et al., “Bunch-by-Bunch Online Diagnostics at HLS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC138, pp. 3309-3311.
- J. E. Spencer et al., “Fast Neutron Radioactivity and Damage Studies on Materials”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS066, pp. 581-583.
- B. Goddard et al., “Possible Reuse of the LHC as a 3.3 TeV High Energy Booster for Hadron Injection into the FCC-hh Collider”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3919-3922.
- T. Schmidt and S. Reiche, “Undulators for the SwissFEL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper THOA01, pp. 706-713.
- D. Iglesias et al., “Thermo-mechanical Design of Particle-stopping Devices at the High Energy Beamline Sections of the IFMIF/EVEDA Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS059, pp. 3562-3564.
- R. Kazimi et al., “Observation and Mitigation of Multipass BBU in CEBAF”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP087, pp. 2722-2724.
- P. K. Skowronski et al., “Experimental Verification of the CLIC Two-Beam Acceleration Technology in CTF3”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI040, pp. 1436-1438.
- S. L. Hoobler et al., “Design and Commissioning Results of MicroTCA Stripline BPM System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 180-183.
- M. Gu, R. Chen, Z. H. Chen, G.-Y. Jiang, R. Wang, and Q. Yuan, “In-Vacuum Undulator Controller Design for SSRF”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD034, pp. 3168-3170.
Back to search