JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. Piselli et al., “CERN-SPS Wire Scanner Impedence and Wire Heating Studies”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF16, pp. 88-92. 
[n]	T. Momose et al., “Radiation Dose Measurements and a Study of Damage to Accelerator Components in the TRISTAN ee- Collider at 27.5 GeV”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1284-1287. 
[n]	R. Spesyvtsev, J. W. Baehr, S. Khodyachykh, and L. Staykov, “Screen studies at PITZ”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC05, pp. 153-155. 
[n]	R. L. Madrak et al., “Progress on the Design of a Perpendicularly Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 130-133. doi:10.18429/JACoW-NAPAC2016-MOPOB28
[n]	D. Fernandez, M. Ounsy, and C. Scafuri, “The Tango collaboration Status and some of the latest developments”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_006. 
[n]	R. Ursic and R. De Monte, “Digital Receivers Offer New Solutions for Beam Instrumentation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA172, pp. 2253-2255. 
[n]	M. Krasilnikov et al., “PITZ Experience on the Experimental Optimization of the RF Photo Injector for the European XFEL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUOANO04, pp. 160-168. 
[n]	T. Higo et al., “Various Observables of TW Accelerator Structures Operating 100MV/m or Higher at X-band Facility, Nextef of KEK”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA012, pp. 3699-3701. 
[n]	N. A. Galyaev, Y. A. Chesnokov, V. I. Kotov, S. V. Tsarik, and V. N. Zapol, “Bent Single Crystals to Form High Energy Particle Beams”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 192-195. 
[n]	L. Froehlich, G. Cautero, D. Di Giovenale, D. Giuressi, and R. H. Menk, “The Machine Protection System for FERMI@Elettra”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPC10, pp. 667-670. 
[n]	T. B. Hadavizadeh et al., “Transverse Emittance Measurements Using LHCb's Beam-Gas Interactions”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 441-444. doi:10.18429/JACoW-IPAC2017-MOPAB131
[n]	M. Marongiu et al., “Optical Issues for the Diagnostic Stations for the ELI-NP Compton Gamma Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 238-241. doi:10.18429/JACoW-IPAC2017-MOPAB058
[n]	S. Casalbuoni et al., “Field Quality of 1.5 m Long Conduction Cooled Superconducting Undulator Coils with 20 mm Period Length”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1395-1398. doi:10.18429/JACoW-IPAC2017-TUPAB035
[n]	Y. Mizumachi and K. Muto, “RF Phase Shake and Counterphasing at Phase Transition”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2563-2566. 
[n]	S. W. Jang et al., “The Development of Button Type BPM Electronics for RAON”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 362-364. doi:10.18429/JACoW-IPAC2017-MOPAB100
[n]	T. Russo, S. Bellavia, D. M. Gassner, P. Thieberger, D. Trbojevic, and T. Tsang, “RHIC Hydrogen Jet Luminesence Monitor”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THYC01, pp. 2648-2652. 
[n]	H. Hotchi et al., “The Path to 1 MW: Beam Loss Control in the J-PARC 3-GeV RCS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 480-485. doi:10.18429/JACoW-HB2016-THAM6X01
[n]	S. Marks et al., “Magnetic Performance of the Advanced Light Source EPU5.0 Elliptically Polarizing Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR4, pp. 162-164. 
[n]	B. Schofield, E. Blanco Vinuela, W. Booth, and M. O. Peljo, “Waste Heat Recovery for the LHC Coooling Towers: Control System Validation Using Digital Twins”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 521. doi:10.18429/JACoW-ICALEPCS2019-MOPHA131
[n]	K. Zhu et al., “Monoenergetic Beam Generated by Laser Accelerator at Peking University”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4702-4704. doi:10.18429/JACoW-IPAC2018-THPML024
[n]	F. Sannibale et al., “Compensation of Insertion Device Induced Emittance Variations in Ultralow Emittance Storage Rings”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1751-1754. doi:10.18429/JACoW-IPAC2018-WEXGBE2
[n]	K. Takayama et al., “Ion Source and Low Energy Beam Transport for the KEK Digital Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC053, pp. 579-581. 
[n]	H. Suk et al., “Overview of The Laser Wakefield Acceleration Research at KERI”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH204, pp. 591-595. 
[n]	X. W. Wu et al., “High-Gradient Breakdown Studies of X-Band Choke-Mode Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1322-1325. doi:10.18429/JACoW-IPAC2017-TUPAB010
[n]	M. Kuchnir, J. D. McCarthy, and R. J. Pasquinelli, “Superconducting Delay Line for Stochastic Cooling Filters”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3360-3363. 
[n]	D. J. Liska, L. B. Dauelsberg, and G. Spalek, “Precision Alignment of Permanent Magnet Drift Tubes”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-5, pp. 48-49. 
[n]	K. R. Eppley, W. B. Herrmannsfeldt, and T. G. Lee, “Improving the Efficiency of Microwave Devices with a Double Output Cavity”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-29, pp. 109-111. 
[n]	M. LABAT, M.-E. Couprie, M. Hosaka, M. Katoh, A. Mochihashi, and Y. Takashima, “Detuning Curve Analysis on the UVSOR2 Free-Electron Laser”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP002, pp. XX-XX. 
[n]	Y. X. Luo, I. S. Ko, W. Namkung, and C. Ryu, “Beam Emittance Measurement Technique for PLS-IM-T Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1195-1198. 
[n]	W. Chupp, D. Clark, R. Richter, J. Staples, and E. Zajec, “Operation of a High-Current Xenon Source”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3036-3039. 
[n]	P. Muggli et al., “Electron and Positron Bunch Self-modulation Experiments at SLAC-FACET”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC02, pp. 84-86. 
[n]	R. Grewe et al., “Superconducting RF Cavity Materials Research at the S-DALINAC”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 74-76. doi:10.18429/JACoW-SRF2019-MOP022
[n]	E. Al-Dmour, “Vacuum Performances in the Most Recent Third Generation Synchrotron Light Sources”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOZBG01, pp. 31-35. 
[n]	B. S. C. Oswald, P. Leidenberger, and S. Tsujino, “Modeling Nanometer Structured Laser Induced Field Emission”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC054, pp. 1844-1846. 
[n]	Y.-N. Rao, R. A. Baartman, and T. Planche, “Improved Simulation for Centre Region of TRIUMF 500 MeV Cyclotron with Space Charge”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3489-3491. doi:10.18429/JACoW-IPAC2018-THPAK109
[n]	S. Barbanotti, M. Bonezzi, C. Engling, K. Jensch, R. Mattusch, and M. Todero, “Production and Qualification of Low Thermal Conduction Suspension Supports for the Cold Mass of Long Superconducting Acceleration Modules”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP115, pp. 829-831. 
[n]	M. White, “The Spallation Neutron Source (SNS)”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO101, pp. 1-5. 
[n]	P. Emma et al., “First Results of the LCLS Laser-Heater System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP041, pp. 2358-2360. 
[n]	S. Fu, H. C. Liu, H. F. Ouyang, S. Wang, J. Li, and J. Peng, “CSNS Front End and Linac Commissioning”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. XX-XX. doi:10.18429/JACoW-LINAC2018-MO1A01
[n]	G. Segura, A. Ledeul, A. Savulescu, B. Styczen, and D. Vazquez Rivera, “Innovative Graphical User Interfaces Development: Give the Power Back to Users”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 44-46. doi:10.18429/JACoW-PCaPAC2018-WEP07
[n]	V. E. Scarpine et al., “The Fermilab HINS Test Facility and Beam Measurements of the Ion Source and 325 MHz RFQ”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUOA03, pp. 283-285. 
[n]	A. Khaleghi, K. Mahmoudi, M. Oghbaie, M. Akbari, and J. Rahighi, “Conceptual Design of Developing a Mobile App for Distributed Information Services for Control Systems (DISCS)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 315-317. doi:10.18429/JACoW-ICALEPCS2017-TUMPL06
[n]	P. J. Phillips et al., “Single-shot Longitudinal Bunch Profile Measurements at FLASH Using Electro-optic Detection Techniques”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC081, pp. 1242-1244. 
[n]	I. Krouptchenkov, A. Brenger, G. Kube, F. Schmidt-F?Âhre, and K. Wittenburg, “Experience with the Commissioning of the Libera Brilliance BPM Electronics at PETRA III”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD03, pp. 291-293. 
[n]	S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583. 
[n]	D. V. Neuffer et al., “Muon Sources for Particle Physics - Accomplishments of MAP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1766-1769. doi:10.18429/JACoW-IPAC2017-TUPIK038
[n]	D. Anicic, “Quest for the New Standard PSI IOC Platform”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 119-123. doi:10.18429/JACoW-PCaPAC2018-THCA1
[n]	R. Ferdinad et al., “Low Energy Part of the CONCERT High-Power Proton Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH022, pp. 3272-3274. 
[n]	K. S. White, S. M. Hartman, K.-U. Kasemir, and I. Verstovsek, “Controls Request Tracker”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOC004, pp. XX-XX. 
[n]	T. Straumann, “Open Source Real-Time Operating Systems Overview”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEBI001, pp. XX-XX. 
[n]	M. T. F. Pivi et al., “Recommendation for the Feasibility of More Compact LC Damping Rings”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE097, pp. 3578-3580. 
[n]	A. Garcia Mu??oz and S. Gabourin, “Testing Digital Electronic Protection Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU002, pp. 1047-1050. 
[n]	C. Steier et al., “Orbit Feedback Development at the ALS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI029, pp. 2103-2105. 
[n]	D. Trbojevic et al., “Improvements of the RHIC Ramp Efficiency”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE061, pp. 383-385. 
[n]	J. R. Piton, M. P. Donadio, D. Omitto, M. A. Raulik, H. Westfahl Jr, and B. C. Yenikomochian, “Hyppie: A Hypervisored PXI for Physics Instrumentation under EPICS”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG031, pp. 95-97. 
[n]	Y. S. Cho et al., “A 350 MHz CW RFQ Linac for the KOMAC/KTF”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A16, pp. 812-814. 
[n]	W. M. Fawley, G. J. Caporaso, M. R. Teague, S. S. Yu, and A. M. Sessler, “Novel Accelerators Employing High-Current Electron Beams: Numerical Simulations”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-30, pp. 112-115. 
[n]	G. R. White et al., “The EPICS Software Framework Moves from Controls to Physics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1216-1218. doi:10.18429/JACoW-IPAC2019-TUZZPLM3
[n]	F. Gerardin et al., “Space Charge Compensation in Low Energy Beam Lines”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3055-3057. doi:10.18429/JACoW-IPAC2016-WEPOY033
[n]	H. Okuno et al., “Operational Experience and Upgrade Plans of the RIBF Accelerator Complex”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-Cyclotrons2016-MOA01
[n]	C. Deibele et al., “Experimental Tests of a Prototype System for Active Damping of the E-P Instability at the LANL PSR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXC01, pp. 1991-1995. 
[n]	E. Gjonaj et al., “Large Scale Parallel Wake Field Computations for 3D-Accelerator Structures with the PBCI Code”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOM2IS02, pp. 29-34. 
[n]	M. Stettler et al., “A Distributed Timing System for Synchronizing Control and Data Correlation”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-74, pp. 820-822. 
[n]	J. R. Leibfritz et al., “Status and Plans for a SRF Accelerator Test Facility at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP009, pp. 118-120. 
[n]	A. Lumpkin et al., “Overall Design Concepts for the APS Storage Ring Machine Protection System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ08, pp. 2467-2469. 
[n]	K. L. F. Bane, R. Gluckstern, and N. Holtkamp, “The Coupled Dipole Modes of the NLC Accelerator Structure”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 904-907. 
[n]	A. Lasheen et al., “Synchrotron Frequency Shift as a Probe of the CERN SPS Reactive Impedance”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO4LR02, pp. 409-413. 
[n]	D. P. Grote, A. Friedman, and I. Haber, “Three Dimensional Simulations of a Small Induction Recirculator Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR15, pp. 831-833. 
[n]	A. Massarotti, G. D'Auria, A. Fabris, C. Pasotti, C. Rossi, and M. Svandrlik, “Status Report on the ELETTRA R.F. System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 710-713. 
[n]	Y. Sato et al., “Design of the Low Energy Beam Transport in RIKEN New Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB023, pp. 3936-3938. 
[n]	T. Tanikawa et al., “A Superradiant THz Undulator Source for XFELs”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 48-51. doi:10.18429/JACoW-FEL2019-TUP004
[n]	P. N. Ostroumov, Z. A. Conway, B. Mustapha, and A. S. Plastun, “Design and Beam Dynamics Studies of a Multi-Ion Linac Injector for the JLEIC Ion Complex”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 559-561. doi:10.18429/JACoW-HB2016-THPM5Y01
[n]	S. Shibata, Z. Igarashi, H. Ishii, and K. Muto, “KEK Beam Position Monitor System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1736-1739. 
[n]	N. Kuklev, Y. K. Kim, and A. L. Romanov, “Synchrotron Radiation Beam Diagnostics for the Integrable Optics Test Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2073-2076. doi:10.18429/JACoW-IPAC2018-WEPAG005
[n]	A. D. Wu et al., “Vertical Test Results of Plasma In-situ Cleaning on Low Beta HWR Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 408-411. doi:10.18429/JACoW-LINAC2018-TUPO036
[n]	H. Ishizuka, A. Fisher, K. Kamada, R. Prohaska, and N. Rostoker, “Preliminary Experiment on the Electron Beam Extraction from a Stellatron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 136-139. 
[n]	I. Krouptchenkov and K. Wittenburg, “FPGA based Frame Grabber for Video Beam Diagnostics”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC12, pp. 174-176. 
[n]	R. Moser et al., “ProShell ÔÇô The MedAustron Accelerator Control Procedure Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN005, pp. 246-249. 
[n]	H. Ao et al., “Fabrication of Disk-and-Washer Cavity”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D042, pp. 187-189. 
[n]	M. Dehn, H. Euteneuer, and A. Jankowiak, “Longitudinal Beam Dynamics in the HDSM at MAMI”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP063, pp. 3594-3596. 
[n]	N. I. Zaitsev et al., “500 keV, 200 A MICROSECOND ELECTRON ACCELERATOR WITH A REPETITION RATE OF 10 Hz”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THBPH09, pp. XX-XX. 
[n]	D. A. Liakin, S. V. Barabin, T. Kulevoy, A. Y. Orlov, and M. S. Saratovskikh, “Some Development Aspects of Control and Diagnostic Systems for Fourth-Generation Russian Synchrotron Radiation Source”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 450-452. doi:10.18429/JACoW-RUPAC2018-THPSC20
[n]	V. L. Auslender et al., “ELECTRON ACCELERATOR FOR ENERGY UP TO 5.0 MEV AND BEAM POWER UP TO 50 KW”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THJI03, pp. XX-XX. 
[n]	J. F. Chen et al., “Multipacting Study in INFN-LASA ESS Medium-Beta Cavity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1019-1022. doi:10.18429/JACoW-IPAC2017-MOPVA064
[n]	F. J. Bermejo, I. Bustinduy, and J. Lucas, “Baseline Design for the ESS-Bilbao Superconducting Proton Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP082, pp. 1482-1484. 
[n]	L. M. Bobb, A. F. D. Morgan, and G. Rehm, “Streak Camera PSF Optimisation and Dual Sweep Calibration for Sub-ps Bunch Length Measurement”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 206-210. doi:10.18429/JACoW-IBIC2015-MOPB066

For LaTeX

Use Complete Form

For BibTeX

References

Back to search