Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. V. Semenov et al., “Commissioning of Electron Cooling System of NICA Booster”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 188-190. doi:10.18429/JACoW-RUPAC2018-TUPSA22
[n] E. G. Cook et al., “Solid-State Modulators for RF and Fast Kickers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB008, pp. 637-641.
[n] F. Khan, J. P. Hammonds, S. Narayanan, A. Sandy, and N. Schwarz, “Effective End-to-end Management of Data Acquisition and Analysis for X-ray Photon Correlation Spectroscopy”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOBA04, pp. 1004-1007.
[n] A. Chavan, A. DiChiara, P. D. Hartog, B. Hu, and K. J. Suthar, “Characterization of the Acoustic Field Generated by the Single-Axis Acoustic Levitator”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 226-229. doi:10.18429/JACoW-MEDSI2016-TUPE28
[n] R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302.
[n] G. J. Caporaso et al., “High Gradient Induction Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUYC02, pp. 857-861.
[n] A. Gholampour, S. Amiri, H. Ghasem, H. Khosroabadi, J. Rahighi, and M. Lamehi Rashti, “Effect of the Electron Beam Emittance on the ILSF Radiation of Sources and Beamline Design”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2075-2077. doi:10.18429/JACoW-IPAC2014-WEPRO057
[n] M. Kenda, T. Beltram, T. Juretic, B. Repic, D. Skvarc, and C. Valentincic, “Simplified Instrument/Application Development and System Integration Using Libera Base Software Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN009, pp. 890-893.
[n] R. Steinbr?â et al., “Control System Integration of a MicroTCA.4 Based Digital LLRF Using the ChimeraTK OPC UA Adapter”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1811-1814. doi:10.18429/JACoW-ICALEPCS2017-THPHA166
[n] G. A. Loew et al., “The SLC Energy Upgrade Program at SLAC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2748-2751.
[n] E. Mahner, R. Heiderhoff, N. Minatti, G. M??ller, H. Piel, and N. Pupeter, “Field Emission Measurements on Niobium Cathodes of High Purity”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F08, pp. XX-XX.
[n] S. Dewan, R. Holmes, K. Reiniger, F. V?Âlker, and J. Zeng, “High Power Switch-mode Power Converters for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THOAF102, pp. 333-335.
[n] Y. S. Cho, B. H. Choi, J. H. Jang, H. J. Kwon, and M. Y. Park, “Design of 20MeV DTL for PEFP”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB016, pp. 1219-1221.
[n] I. Wilson, “CLIC Test Beam Facilities - Status and Results”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper WE102, pp. 552-556.
[n] P. Schoessow et al., “Beam Breakup in Dielectric Wakefield Accelerating Structures: Modeling and Experiments”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP111, pp. 1689-1691.
[n] S. C. Wang, D. D. Dong, S. Fukuda, G. Pei, O. Xiao, and Z. S. Zhou, “Design Study of Collector for CEPC 650 MHz Klystron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 540-542. doi:10.18429/JACoW-IPAC2016-MOPMY013
[n] K. J. Suthar, P. K. Den Hartog, and A. M. Lurie, “A Discussion on Utilization of Heat Pipes and Vapour Chamber Technology as a Primary Device for Heat Extraction from Photon Absorber Surfaces”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 280-282. doi:10.18429/JACoW-MEDSI2016-WEBA04
[n] C. E. Hill, “Experiments on a 14.5 GHz ECR source”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP18, pp. 366-368.
[n] B. vanderHorst, A. Matheisen, B. Petersen, S. Saegebarth, and P. Schilling, “Update on Cavity Preparation for High Gradient Superconducting Multicell Cavities at DESY”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP30, pp. XX-XX.
[n] S. L. Sheehy, A. J. Egerton, A. Steinberg, and L. Wroe, “How Robust Are Existing Medical Linacs in Challenging Environments? A Study of Down Time and Failure Causes.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3530-3532. doi:10.18429/JACoW-IPAC2019-THPMP039
[n] V. N. Boriskin et al., “Control Power Supply System for Electromagnetic Elements for Tehnological Linac”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP063, pp. XX-XX.
[n] A. Degiovanni et al., “Emittance Measurements at the Strasbourg TR24 Cyclotron for the Addition of a 65 MeV Linac Booster”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT005, pp. 329-331.
[n] N. Krupka et al., “Quality Control at the TTF-Cleanroom Infrastructure for Cavity-Processing”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP18, pp. 322-326.
[n] J.-F. Ostiguy and L. Michelotti, “CHEF: A Status Report”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN112, pp. 3486-3488.
[n] D. Kostin et al., “European XFEL: Accelerating Module Repair at DESY”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 127-130. doi:10.18429/JACoW-SRF2019-MOP034
[n] J.-M. Capdevila, O. Gal, F. Laine, and A. Nguyen, “RF Field Generation in a Coaxial Cavity by a Micropulsed Electron Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1274-1277.
[n] S. Maury et al., “Commissioning and First Operation of the Antiproton Decelerator (AD)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA008, pp. 580-584.
[n] I. R. Bailey et al., “A Prototype Target Wheel for the ILC Positron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP069, pp. 706-708.
[n] S. Pei and O. Xiao, “Studies on An S-band Bunching System with Hybrid Buncher”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUODB101, pp. 1120-1122.
[n] B. W. Allardyce and K. Gase, “Use of a Secondary Emission Monitor in the Extraction Channel of the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-05, pp. 355-357.
[n] A.Bogomyagkov, “IR design for Super-ct-factory”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper WEACH10, pp. XX-XX.
[n] E. Hartwig, “The AEG Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F04, pp. XX-XX.
[n] N. Yu. Kazarinov, D. Boutin, and F. R. Osswald, “Induced Heating Power Evaluation in RIB Transfer Line of SPIRAL2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 570-572. doi:10.18429/JACoW-IPAC2014-MOPRI001
[n] I. Martel, C. Bontoiu, J. A. Duenas, D. Gordo, A. K. Orduz, and J. Sanchez-Segovia, “A New RF Laboratory for Developing Accelerator Cavities at the University of Huelva”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3046-3047. doi:10.18429/JACoW-IPAC2015-WEPMN052
[n] V. I. Moiseev and V. Korchuganov, “Em Fields in a Metal in an External Magnetic Field at Low Temperatures”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 340-342. doi:10.18429/JACoW-RUPAC2018-WEPSB28
[n] D. L. Hall et al., “Quench Studies in Single-Cell Nb3Sn Cavities Coated Using Vapour Diffusion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1119-1122. doi:10.18429/JACoW-IPAC2017-MOPVA116
[n] J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1288-1290. doi:10.18429/JACoW-IPAC2019-TUPMP023
[n] R. Apsimon, G. Burt, A. C. Dexter, R. B. Appleby, P. Baudrenghien, and K. N. Sjobak, “Modeling the Low Level RF Response on the Beam during Crab Cavity Quench”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1098-1101. doi:10.18429/JACoW-IPAC2017-MOPVA102
[n] J. Rahighi et al., “Status Report on the Iranian Light Source Facility Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUEPPB008, pp. 1131-1133.
[n] S. M. Gerbick and M. P. Kelly, “A Clean Pumping and Venting System for SRF Cavities and Cryomodules”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO029, pp. 619-621.
[n] D. A. Zavadtsev et al., “Construction and RF Test of the Debuncher for NICA Light Ion Beam Line”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 197-199. doi:10.18429/JACoW-RUPAC2018-TUPSA25
[n] U. Bartz, A. Bechtold, J. M. Maus, N. Mueller, and A. Schempp, “The New CW RFQ Prototype”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP025, pp. 870-872.
For LaTeX
Use Complete Form
For BibTeX
References
- S. V. Semenov et al., “Commissioning of Electron Cooling System of NICA Booster”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 188-190.
- E. G. Cook et al., “Solid-State Modulators for RF and Fast Kickers”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAB008, pp. 637-641.
- F. Khan, J. P. Hammonds, S. Narayanan, A. Sandy, and N. Schwarz, “Effective End-to-end Management of Data Acquisition and Analysis for X-ray Photon Correlation Spectroscopy”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper WECOBA04, pp. 1004-1007.
- A. Chavan, A. DiChiara, P. D. Hartog, B. Hu, and K. J. Suthar, “Characterization of the Acoustic Field Generated by the Single-Axis Acoustic Levitator”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 226-229.
- R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302.
- G. J. Caporaso et al., “High Gradient Induction Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUYC02, pp. 857-861.
- A. Gholampour, S. Amiri, H. Ghasem, H. Khosroabadi, J. Rahighi, and M. Lamehi Rashti, “Effect of the Electron Beam Emittance on the ILSF Radiation of Sources and Beamline Design”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2075-2077.
- M. Kenda, T. Beltram, T. Juretic, B. Repic, D. Skvarc, and C. Valentincic, “Simplified Instrument/Application Development and System Integration Using Libera Base Software Framework”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN009, pp. 890-893.
- R. Steinbr?â et al., “Control System Integration of a MicroTCA.4 Based Digital LLRF Using the ChimeraTK OPC UA Adapter”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1811-1814.
- G. A. Loew et al., “The SLC Energy Upgrade Program at SLAC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2748-2751.
- E. Mahner, R. Heiderhoff, N. Minatti, G. M??ller, H. Piel, and N. Pupeter, “Field Emission Measurements on Niobium Cathodes of High Purity”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F08, pp. XX-XX.
- S. Dewan, R. Holmes, K. Reiniger, F. V?Âlker, and J. Zeng, “High Power Switch-mode Power Converters for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THOAF102, pp. 333-335.
- Y. S. Cho, B. H. Choi, J. H. Jang, H. J. Kwon, and M. Y. Park, “Design of 20MeV DTL for PEFP”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB016, pp. 1219-1221.
- I. Wilson, “CLIC Test Beam Facilities - Status and Results”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper WE102, pp. 552-556.
- P. Schoessow et al., “Beam Breakup in Dielectric Wakefield Accelerating Structures: Modeling and Experiments”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP111, pp. 1689-1691.
- S. C. Wang, D. D. Dong, S. Fukuda, G. Pei, O. Xiao, and Z. S. Zhou, “Design Study of Collector for CEPC 650 MHz Klystron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 540-542.
- K. J. Suthar, P. K. Den Hartog, and A. M. Lurie, “A Discussion on Utilization of Heat Pipes and Vapour Chamber Technology as a Primary Device for Heat Extraction from Photon Absorber Surfaces”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 280-282.
- C. E. Hill, “Experiments on a 14.5 GHz ECR source”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP18, pp. 366-368.
- B. vanderHorst, A. Matheisen, B. Petersen, S. Saegebarth, and P. Schilling, “Update on Cavity Preparation for High Gradient Superconducting Multicell Cavities at DESY”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP30, pp. XX-XX.
- S. L. Sheehy, A. J. Egerton, A. Steinberg, and L. Wroe, “How Robust Are Existing Medical Linacs in Challenging Environments? A Study of Down Time and Failure Causes.”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3530-3532.
- V. N. Boriskin et al., “Control Power Supply System for Electromagnetic Elements for Tehnological Linac”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP063, pp. XX-XX.
- A. Degiovanni et al., “Emittance Measurements at the Strasbourg TR24 Cyclotron for the Addition of a 65 MeV Linac Booster”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT005, pp. 329-331.
- N. Krupka et al., “Quality Control at the TTF-Cleanroom Infrastructure for Cavity-Processing”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP18, pp. 322-326.
- J.-F. Ostiguy and L. Michelotti, “CHEF: A Status Report”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN112, pp. 3486-3488.
- D. Kostin et al., “European XFEL: Accelerating Module Repair at DESY”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 127-130.
- J.-M. Capdevila, O. Gal, F. Laine, and A. Nguyen, “RF Field Generation in a Coaxial Cavity by a Micropulsed Electron Beam”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1274-1277.
- S. Maury et al., “Commissioning and First Operation of the Antiproton Decelerator (AD)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPA008, pp. 580-584.
- I. R. Bailey et al., “A Prototype Target Wheel for the ILC Positron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP069, pp. 706-708.
- S. Pei and O. Xiao, “Studies on An S-band Bunching System with Hybrid Buncher”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUODB101, pp. 1120-1122.
- B. W. Allardyce and K. Gase, “Use of a Secondary Emission Monitor in the Extraction Channel of the CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-05, pp. 355-357.
- A.Bogomyagkov, “IR design for Super-ct-factory”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper WEACH10, pp. XX-XX.
- E. Hartwig, “The AEG Compact Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F04, pp. XX-XX.
- N. Yu. Kazarinov, D. Boutin, and F. R. Osswald, “Induced Heating Power Evaluation in RIB Transfer Line of SPIRAL2”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 570-572.
- I. Martel, C. Bontoiu, J. A. Duenas, D. Gordo, A. K. Orduz, and J. Sanchez-Segovia, “A New RF Laboratory for Developing Accelerator Cavities at the University of Huelva”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3046-3047.
- V. I. Moiseev and V. Korchuganov, “Em Fields in a Metal in an External Magnetic Field at Low Temperatures”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 340-342.
- D. L. Hall et al., “Quench Studies in Single-Cell Nb3Sn Cavities Coated Using Vapour Diffusion”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1119-1122.
- J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1288-1290.
- R. Apsimon, G. Burt, A. C. Dexter, R. B. Appleby, P. Baudrenghien, and K. N. Sjobak, “Modeling the Low Level RF Response on the Beam during Crab Cavity Quench”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1098-1101.
- J. Rahighi et al., “Status Report on the Iranian Light Source Facility Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUEPPB008, pp. 1131-1133.
- S. M. Gerbick and M. P. Kelly, “A Clean Pumping and Venting System for SRF Cavities and Cryomodules”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO029, pp. 619-621.
- D. A. Zavadtsev et al., “Construction and RF Test of the Debuncher for NICA Light Ion Beam Line”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 197-199.
- U. Bartz, A. Bechtold, J. M. Maus, N. Mueller, and A. Schempp, “The New CW RFQ Prototype”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP025, pp. 870-872.
Back to search