Favourites
For Word
[n] M.-S. Chiu, Y.-S. Cheng, C. P. Felix, G.-H. Luo, H.-J. Tsai, and F. H. Tseng, “Simulation Study of Orbit Correction by Neural Network in Taiwan Photon Source”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 188-191. doi:10.18429/JACoW-FLS2023-WE4P19
[n] C. H. Rivetta, J. D. Fox, T. Mastorides, D. Teytelman, and D. Van Winkle, “Modeling and Simulation of Longitudinal Dynamics for LER-HER PEP II Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH101, pp. 3032-3034.
[n] J. Tang et al., “The Role of Laser Shaping in Microbunching Instability Suppression and Seeded X-Ray Free Electron Emission”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 990-992. doi:10.18429/JACoW-NAPAC2019-FRXBA5
[n] M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septum Prototype for Accumulator and Storage Rings of DAPhiNE, the Frascati Phi-Factory”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2403-2406.
[n] M. E. Biagini et al., “New Low Emittance Lattices for the SuperB Accelerator Project”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP040, pp. 2608-2610.
[n] R. P. Johnson, “Ionization Cooling”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUM2I04, pp. 68-72.
[n] N. Tsoupas et al., “Design of Beam Transfer Lines for the NSLS II”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS102, pp. 664-666.
[n] D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840.
[n] P. J. Chou, H.-P. Chang, C.-C. Kuo, and W. T. Liu, “Design Status of Transfer Lines in TPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP002, pp. 2261-2263.
[n] L. T. Jackson, A. H. Saab, and D. W. Shimer, “PEP-II Magnet Power Conversion Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP01, pp. 1961-1963.
[n] Yu. S. Ivanov, S. K. Esin, L. L. Filipchicov, V. A. Konovalov, B. P. Murin, and Y. Senichev, “Automated Control System Structure of the USSR Academy of Sciences Kaon Facility”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 352-355. doi:10.18429/JACoW-ICALEPCS1991-S10TS03
[n] O. Mohsen, M. Borland, and Y. Sun, “Machine learning-enhanced infrared imaging for temperature anomaly detection in power supplies”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM103, unpublished.
[n] M. Mapes and N. Tsoupas, “Design of an Ultra High Vacuum Compatible Copper Septum Magnet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB047, pp. 2141-2143.
[n] T. Higo et al., “Fabrication Process of Rounded Damped Detuned Structure”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA01, pp. 371-373.
[n] S. Kashiwagi et al., “Beam Loading Compensation Using Phase to Amplitude Modulation Method in ATF”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4019, pp. 91-93.
[n] E. Allaria et al., “First Lasing of a Free Electron Laser in the Soft X-Ray Spectral Range with Echo Enabled Harmonic Generation”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 7-10. doi:10.18429/JACoW-FEL2019-MOA02
[n] I. Reyzl, “Simulation of Feedback for Orbit Correction”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP043L, pp. 1887-1889.
[n] C. Zhang and H. Podlech, “Efficient Heavy Ion Acceleration with High Brilliance”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 83-86. doi:10.18429/JACoW-HIAT2022-TUP07
[n] B. Sinha, D. K. Bose, C. Mallik, P. Y. Nabhiraj, G. Pal, and G. S. Taki, “The Electron Cyclotron Resonance Ion Source at Variable Energy Cyclotron Centre, Calcutta”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-11, pp. 408-411.
[n] G. H. Mackenzie, “Injection into a High-Intensity Synchrotron from a Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-02, pp. 84-87.
For LaTeX
Use Complete Form
For BibTeX
References
- M.-S. Chiu, Y.-S. Cheng, C. P. Felix, G.-H. Luo, H.-J. Tsai, and F. H. Tseng, “Simulation Study of Orbit Correction by Neural Network in Taiwan Photon Source”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper WE4P19, pp. 188-191.
- C. H. Rivetta, J. D. Fox, T. Mastorides, D. Teytelman, and D. Van Winkle, “Modeling and Simulation of Longitudinal Dynamics for LER-HER PEP II Rings”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH101, pp. 3032-3034.
- J. Tang et al., “The Role of Laser Shaping in Microbunching Instability Suppression and Seeded X-Ray Free Electron Emission”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 990-992.
- M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septum Prototype for Accumulator and Storage Rings of DAPhiNE, the Frascati Phi-Factory”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2403-2406.
- M. E. Biagini et al., “New Low Emittance Lattices for the SuperB Accelerator Project”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP040, pp. 2608-2610.
- R. P. Johnson, “Ionization Cooling”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper TUM2I04, pp. 68-72.
- N. Tsoupas et al., “Design of Beam Transfer Lines for the NSLS II”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS102, pp. 664-666.
- D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840.
- P. J. Chou, H.-P. Chang, C.-C. Kuo, and W. T. Liu, “Design Status of Transfer Lines in TPS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP002, pp. 2261-2263.
- L. T. Jackson, A. H. Saab, and D. W. Shimer, “PEP-II Magnet Power Conversion Systems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPP01, pp. 1961-1963.
- Yu. S. Ivanov, S. K. Esin, L. L. Filipchicov, V. A. Konovalov, B. P. Murin, and Y. Senichev, “Automated Control System Structure of the USSR Academy of Sciences Kaon Facility”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S10TS03, pp. 352-355.
- O. Mohsen, M. Borland, and Y. Sun, “Machine learning-enhanced infrared imaging for temperature anomaly detection in power supplies”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM103, this conference.
- M. Mapes and N. Tsoupas, “Design of an Ultra High Vacuum Compatible Copper Septum Magnet”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB047, pp. 2141-2143.
- T. Higo et al., “Fabrication Process of Rounded Damped Detuned Structure”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA01, pp. 371-373.
- S. Kashiwagi et al., “Beam Loading Compensation Using Phase to Amplitude Modulation Method in ATF”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4019, pp. 91-93.
- E. Allaria et al., “First Lasing of a Free Electron Laser in the Soft X-Ray Spectral Range with Echo Enabled Harmonic Generation”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 7-10.
- I. Reyzl, “Simulation of Feedback for Orbit Correction”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP043L, pp. 1887-1889.
- C. Zhang and H. Podlech, “Efficient Heavy Ion Acceleration with High Brilliance”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 83-86.
- B. Sinha, D. K. Bose, C. Mallik, P. Y. Nabhiraj, G. Pal, and G. S. Taki, “The Electron Cyclotron Resonance Ion Source at Variable Energy Cyclotron Centre, Calcutta”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-11, pp. 408-411.
- G. H. Mackenzie, “Injection into a High-Intensity Synchrotron from a Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-02, pp. 84-87.
Back to search