Favourites
For Word
[n] Y. Eidelman and V. Yakimenko, “The Spin Motion Calculation Using Lie Method in Collider Nonlinear Magnetic Field”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 269-272.
[n] E.-S. Kim, “Beam Instabilities at the PLS Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB043, pp. 3105-3107.
[n] X. Qi and H. Geng, “Progress on the CSNS Power Supply System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2921-2923. doi:10.18429/JACoW-IPAC2015-WEPMN004
[n] V. M. Arrieta and S. R. McNeal, “Economical Manufacture of Seamless High-Purity Niobium”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO065, pp. 555-557.
[n] D. Corruble et al., “REVOLUTION at SOLEIL: Review and Prospect for Motion Control”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU040, pp. 525-528.
[n] G. Hemmie, “DESY II, a New Injector for the DESY Storage Rings PETRA and DORIS II”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2028-2031.
[n] R. J. Abrams et al., “Non-Magnetic Momentum Spectrometer Based on Fast Time-of-Flight System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP038, pp. 169-171.
[n] B. Terzic and R. Li, “New Particle-in-cell Code for Numerical Simulation of Coherent Synchrotron Radiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC084, pp. 1913-1915.
[n] G. Hemmie et al., “Design, Construction and Performance of the DESY II Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3625-3628.
[n] W. Venturini Delsolaro et al., “HIE-ISOLDE SC Linac Progress and Commissioning in 2016”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 663-667. doi:10.18429/JACoW-LINAC2016-WE1A05
[n] S. Wilde et al., “Physical Vapour Deposition of Thin Films for Use in Superconducting RF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3249-3252. doi:10.18429/JACoW-IPAC2015-WEPHA059
[n] H. Qin, R. C. Davidson, and E. A. Startsev, “Delta-f Simulation Studies of the Ion-Electron Two-Stream Instability in IBX”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB052, pp. 3120-3122.
[n] R. Gluckstern and R. Li, “Calculation of Cavity/Wave Guide Coupling”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-20, pp. 356-358.
[n] Y. Kawai, G. Alton, J. O. Kiggans, and D. W. Stracener, “ISOL Targets Prepared with a New Paint Infiltration Coating Method”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE016, pp. 1508-1510.
[n] R. Li, “Estimations of Coherent Instabilities for JLEIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3903-3905. doi:10.18429/JACoW-IPAC2017-THPAB080
[n] R. Yang et al., “A consecutive double-slit emittance meter for high-brightness electron source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4721-4724. doi:10.18429/JACoW-IPAC2023-THPL110
[n] V. G. Vaccaro et al., “High Precision Measurements of Linac Coupled Cells”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN018, pp. 2086-2088.
[n] E. D. Matias, M. Benmerrouche, G. Cubbon, A. Hodges, and H. Zhang, “A Hazard Driven Approach to Accelerator Safety System Design - How CLS Successfully Applied ALARP in the Design of Safety Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC040, pp. 172-174.
[n] P. Bagley, “Beam Beam Tune Shifts for 36 Bunch Operation in the Tevatron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP048L, pp. 1155-1157.
[n] J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
[n] D. L. Bruhwiler et al., “Cross-platform and Cloud-based Access to Multiple Particle Accelerator Codes via Application Containers”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 720-723. doi:10.18429/JACoW-IPAC2015-MOPMN009
[n] A. Ushakov, S. Covrig, J. Grames, S. Habet, C. Le Galliard, and E. Voutier, “Evaluation of a high-power target design for positron production at CEBAF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3842-3844. doi:10.18429/JACoW-IPAC2023-WEPM120
[n] P. Kuske, “Short Bunches at the Transition From Strong to Weak Longitudinal Instability”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3696-3699. doi:10.18429/JACoW-IPAC2017-THPAB007
[n] E. Daly et al., “Improved Prototype Cryomodule for the CEBAF 12 GeV Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB077, pp. 1377-1379.
[n] M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88.
[n] B. Kaizer et al., “Study and Development of CW Room Temperature Rebuncher for SARAF Accelerator”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 244-247. doi:10.18429/JACoW-LINAC2016-MOPLR050
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Eidelman and V. Yakimenko, “The Spin Motion Calculation Using Lie Method in Collider Nonlinear Magnetic Field”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 269-272.
- E.-S. Kim, “Beam Instabilities at the PLS Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB043, pp. 3105-3107.
- X. Qi and H. Geng, “Progress on the CSNS Power Supply System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2921-2923.
- V. M. Arrieta and S. R. McNeal, “Economical Manufacture of Seamless High-Purity Niobium”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO065, pp. 555-557.
- D. Corruble et al., “REVOLUTION at SOLEIL: Review and Prospect for Motion Control”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU040, pp. 525-528.
- G. Hemmie, “DESY II, a New Injector for the DESY Storage Rings PETRA and DORIS II”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2028-2031.
- R. J. Abrams et al., “Non-Magnetic Momentum Spectrometer Based on Fast Time-of-Flight System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP038, pp. 169-171.
- B. Terzic and R. Li, “New Particle-in-cell Code for Numerical Simulation of Coherent Synchrotron Radiation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC084, pp. 1913-1915.
- G. Hemmie et al., “Design, Construction and Performance of the DESY II Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3625-3628.
- W. Venturini Delsolaro et al., “HIE-ISOLDE SC Linac Progress and Commissioning in 2016”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 663-667.
- S. Wilde et al., “Physical Vapour Deposition of Thin Films for Use in Superconducting RF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3249-3252.
- H. Qin, R. C. Davidson, and E. A. Startsev, “Delta-f Simulation Studies of the Ion-Electron Two-Stream Instability in IBX”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB052, pp. 3120-3122.
- R. Gluckstern and R. Li, “Calculation of Cavity/Wave Guide Coupling”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-20, pp. 356-358.
- Y. Kawai, G. Alton, J. O. Kiggans, and D. W. Stracener, “ISOL Targets Prepared with a New Paint Infiltration Coating Method”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE016, pp. 1508-1510.
- R. Li, “Estimations of Coherent Instabilities for JLEIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3903-3905.
- R. Yang et al., “A consecutive double-slit emittance meter for high-brightness electron source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL110, pp. 4721-4724.
- V. G. Vaccaro et al., “High Precision Measurements of Linac Coupled Cells”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN018, pp. 2086-2088.
- E. D. Matias, M. Benmerrouche, G. Cubbon, A. Hodges, and H. Zhang, “A Hazard Driven Approach to Accelerator Safety System Design - How CLS Successfully Applied ALARP in the Design of Safety Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC040, pp. 172-174.
- P. Bagley, “Beam Beam Tune Shifts for 36 Bunch Operation in the Tevatron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP048L, pp. 1155-1157.
- J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
- D. L. Bruhwiler et al., “Cross-platform and Cloud-based Access to Multiple Particle Accelerator Codes via Application Containers”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 720-723.
- A. Ushakov, S. Covrig, J. Grames, S. Habet, C. Le Galliard, and E. Voutier, “Evaluation of a high-power target design for positron production at CEBAF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM120, pp. 3842-3844.
- P. Kuske, “Short Bunches at the Transition From Strong to Weak Longitudinal Instability”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3696-3699.
- E. Daly et al., “Improved Prototype Cryomodule for the CEBAF 12 GeV Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB077, pp. 1377-1379.
- M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88.
- B. Kaizer et al., “Study and Development of CW Room Temperature Rebuncher for SARAF Accelerator”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 244-247.
Back to search