Favourites
For Word
[n] C. M. Cheng et al., “Effect of Ozonated Water Cleaning on Photon Stimulated Desorption in a Stainless Steel Chamber”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3778-3780. doi:10.18429/JACoW-IPAC2018-THPAL058
[n] L. F. Wang, “Adaptive Electromagnetic Field Analysis for Axisymmetric Structure and Uniform Waveguide Using the Finite Element Method”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH088, pp. 3048-3050.
[n] I. Ben-Zvi, R. Malone, X. J. Wang, and V. Yakimenko, “High-Resolution Beam Profile Monitor R&D at BNL ATF”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1B17, pp. 1821-1823.
[n] A. Gerbershagen, D. Schulte, and P. Burrows, “CLIC Recombination Scheme for the Low Energy Operation Mode”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR024, pp. 1864-1866.
[n] T. Masuda, T. Fukui, T. Kudo, T. Ohata, and R. T. Tanaka, “Evaluation and Improvement of PoE-based Temperature Measurement Module”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP018, pp. 207-209.
[n] M. Sapinski, R. Singh, D. M. Vilsmeier, and J. W. Storey, “Application of Machine Learning for the IPM-Based Profile Reconstruction”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 410-415. doi:10.18429/JACoW-HB2018-THA2WE02
[n] D. B. Cline, X. P. Ding, and J. L. Lederman, “Higgs Boson Muon Collider Factory: h0, A, H Studies”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC042, pp. 226-228.
[n] M. McAteer, C. Carli, V. Forte, G. Rumolo, and R. Tomas, “Observation of Coherent Instability in the CERN PS Booster”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3076-3078. doi:10.18429/JACoW-IPAC2014-THPRO082
[n] P. Duval, H. Wu, and J. Bobnar, “Common Device Interface 2.0”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO207, pp. 144-146.
[n] Y. Petenev, A. V. Bondarenko, and A. N. Matveenko, “Modeling of the Beam Break Up Instability in Berlin Energy Recovery Linac Project”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB05, pp. 568-571.
[n] F. Yan et al., “Investigation of Regulation Plan for the Vibration Utility Equipment of HEPS”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 136-139. doi:10.18429/JACoW-MEDSI2018-TUPH41
[n] T. Ogitsu, A. Terashima, K. Tsuchiya, G. Ganetis, J. Muratore, and P. Wanderer, “Quench Antennas for RHIC Quadrupole Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ02, pp. 1390-1392.
[n] W. Wuensch et al., “Experience Operating an X-band High-Power Test Stand at CERN”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2288-2290. doi:10.18429/JACoW-IPAC2014-WEPME016
[n] A. Calanna et al., “Study of The New Return Yoke for The Upgraded Superconducting Cyclotron of INFN-LNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3381-3384. doi:10.18429/JACoW-IPAC2017-WEPVA054
[n] F. Tamura et al., “Development of the Feed-forward System for Beam Loading Compensation in the J-PARC RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH130, pp. 1319-1321.
[n] L. F. Wang, Y. Z. Lin, T. Higo, and K. Takata, “High Accuracy Analysis of Arbitrary Modes in Tapered Disk-Loaded Structures”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH087, pp. 3045-3047.
[n] K. Fan, K. Ishii, H. Matsumoto, and N. Matsumoto, “Low Leakage Field Septa for J-PARC Main Ring Injection System Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB009, pp. 295-297.
[n] G. Cattenoz et al., “Vacuum Acceptance Tests for the UHV Room Temperature Vacuum System of the LHC during LS1”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2357-2359. doi:10.18429/JACoW-IPAC2014-WEPME041
[n] M. J. Frank, E. Held, and C. R. Wolf, “Columbus - A Simple Ion Source”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT021, pp. 364-365.
[n] N. Magnin et al., “Consolidation of Re-Triggering System of LHC Beam Dumping System at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 411. doi:10.18429/JACoW-ICALEPCS2019-MOPHA088
[n] A. Todd et al., “High-Power Electron Beam Injectors for 100 kW Free-Electron Lasers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB075, pp. 977-979.
[n] H. Maesaka et al., “Design and Performance of the Synchronization System and Beam Diagnostic Instruments for SACLA”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG4001, pp. 110-115.
[n] S. Verdú-Andrés, U. Amaldi, A. Degiovanni, A. Faus-Golfe, and P. A. Posocco, “Feasibility Study of a High-gradient Linac for Hadrontherapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS045, pp. 2589-2591.
[n] Y. Jiao and G. Xu, “Exploring the Ultimate Linear and Nonlinear Performance of the HEPS hybrid 7BA design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2883-2885. doi:10.18429/JACoW-IPAC2016-WEPOW025
[n] R. Stefanic, J. Dedic, R. Tavcar, J. Gutleber, and R. Moser, “Timing-system Solution for MedAustron; Real-time Event and Data Distribution Network”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN015, pp. 909-911.
[n] V. S. Pronskikh et al., “Target Station Design for the Mu2e Experiment”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3970-3972. doi:10.18429/JACoW-IPAC2014-THPRI085
[n] J. A. Briz Monago et al., “Multi-turn Study in FLUKA for the Design of CERN-PS Internal Beam Dumps”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 724-727. doi:10.18429/JACoW-IPAC2018-TUPAF025
[n] F. Zhou, I. Ben-Zvi, and X. J. Wang, “Beam Dynamics Simulations for a DC Gun Based Injector for PERL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH075, pp. 2266-2268.
[n] A. Palmieri, F. Grespan, and A. Pisent, “Tuning the IFMIF 5MeV RFQ Accelerator”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 969-971. doi:10.18429/JACoW-LINAC2016-THPLR049
[n] H. J. Qian, M. Gross, M. Krasilnikov, A. Oppelt, and F. Stephan, “Investigation of High Repetition Rate Femtosecond Electron Diffraction at PITZ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3727-3729. doi:10.18429/JACoW-IPAC2017-THPAB017
[n] M. A. Fraser et al., “Modelling the Radioactivity Induced by Slow-Extraction Losses in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1897-1900. doi:10.18429/JACoW-IPAC2017-TUPIK086
[n] M. Meddahi et al., “Status of the LHC Injectors Upgrade (LIU) Project at CERN”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3915-3918. doi:10.18429/JACoW-IPAC2015-THPF093
For LaTeX
Use Complete Form
For BibTeX
References
- C. M. Cheng et al., “Effect of Ozonated Water Cleaning on Photon Stimulated Desorption in a Stainless Steel Chamber”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3778-3780.
- L. F. Wang, “Adaptive Electromagnetic Field Analysis for Axisymmetric Structure and Uniform Waveguide Using the Finite Element Method”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH088, pp. 3048-3050.
- I. Ben-Zvi, R. Malone, X. J. Wang, and V. Yakimenko, “High-Resolution Beam Profile Monitor R&D at BNL ATF”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1B17, pp. 1821-1823.
- A. Gerbershagen, D. Schulte, and P. Burrows, “CLIC Recombination Scheme for the Low Energy Operation Mode”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR024, pp. 1864-1866.
- T. Masuda, T. Fukui, T. Kudo, T. Ohata, and R. T. Tanaka, “Evaluation and Improvement of PoE-based Temperature Measurement Module”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP018, pp. 207-209.
- M. Sapinski, R. Singh, D. M. Vilsmeier, and J. W. Storey, “Application of Machine Learning for the IPM-Based Profile Reconstruction”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 410-415.
- D. B. Cline, X. P. Ding, and J. L. Lederman, “Higgs Boson Muon Collider Factory: h0, A, H Studies”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC042, pp. 226-228.
- M. McAteer, C. Carli, V. Forte, G. Rumolo, and R. Tomas, “Observation of Coherent Instability in the CERN PS Booster”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3076-3078.
- P. Duval, H. Wu, and J. Bobnar, “Common Device Interface 2.0”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO207, pp. 144-146.
- Y. Petenev, A. V. Bondarenko, and A. N. Matveenko, “Modeling of the Beam Break Up Instability in Berlin Energy Recovery Linac Project”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB05, pp. 568-571.
- F. Yan et al., “Investigation of Regulation Plan for the Vibration Utility Equipment of HEPS”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 136-139.
- T. Ogitsu, A. Terashima, K. Tsuchiya, G. Ganetis, J. Muratore, and P. Wanderer, “Quench Antennas for RHIC Quadrupole Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ02, pp. 1390-1392.
- W. Wuensch et al., “Experience Operating an X-band High-Power Test Stand at CERN”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2288-2290.
- A. Calanna et al., “Study of The New Return Yoke for The Upgraded Superconducting Cyclotron of INFN-LNS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3381-3384.
- F. Tamura et al., “Development of the Feed-forward System for Beam Loading Compensation in the J-PARC RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH130, pp. 1319-1321.
- L. F. Wang, Y. Z. Lin, T. Higo, and K. Takata, “High Accuracy Analysis of Arbitrary Modes in Tapered Disk-Loaded Structures”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH087, pp. 3045-3047.
- K. Fan, K. Ishii, H. Matsumoto, and N. Matsumoto, “Low Leakage Field Septa for J-PARC Main Ring Injection System Upgrade”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB009, pp. 295-297.
- G. Cattenoz et al., “Vacuum Acceptance Tests for the UHV Room Temperature Vacuum System of the LHC during LS1”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2357-2359.
- M. J. Frank, E. Held, and C. R. Wolf, “Columbus - A Simple Ion Source”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT021, pp. 364-365.
- N. Magnin et al., “Consolidation of Re-Triggering System of LHC Beam Dumping System at CERN”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 411.
- A. Todd et al., “High-Power Electron Beam Injectors for 100 kW Free-Electron Lasers”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB075, pp. 977-979.
- H. Maesaka et al., “Design and Performance of the Synchronization System and Beam Diagnostic Instruments for SACLA”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG4001, pp. 110-115.
- S. Verdú-Andrés, U. Amaldi, A. Degiovanni, A. Faus-Golfe, and P. A. Posocco, “Feasibility Study of a High-gradient Linac for Hadrontherapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS045, pp. 2589-2591.
- Y. Jiao and G. Xu, “Exploring the Ultimate Linear and Nonlinear Performance of the HEPS hybrid 7BA design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2883-2885.
- R. Stefanic, J. Dedic, R. Tavcar, J. Gutleber, and R. Moser, “Timing-system Solution for MedAustron; Real-time Event and Data Distribution Network”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN015, pp. 909-911.
- V. S. Pronskikh et al., “Target Station Design for the Mu2e Experiment”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3970-3972.
- J. A. Briz Monago et al., “Multi-turn Study in FLUKA for the Design of CERN-PS Internal Beam Dumps”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 724-727.
- F. Zhou, I. Ben-Zvi, and X. J. Wang, “Beam Dynamics Simulations for a DC Gun Based Injector for PERL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH075, pp. 2266-2268.
- A. Palmieri, F. Grespan, and A. Pisent, “Tuning the IFMIF 5MeV RFQ Accelerator”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 969-971.
- H. J. Qian, M. Gross, M. Krasilnikov, A. Oppelt, and F. Stephan, “Investigation of High Repetition Rate Femtosecond Electron Diffraction at PITZ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3727-3729.
- M. A. Fraser et al., “Modelling the Radioactivity Induced by Slow-Extraction Losses in the CERN SPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1897-1900.
- M. Meddahi et al., “Status of the LHC Injectors Upgrade (LIU) Project at CERN”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3915-3918.
Back to search