Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Li Vecchi et al., “Distributed Optical Fiber Radiation Sensing at CERN”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2039-2042. doi:10.18429/JACoW-IPAC2018-WEPAF083
[n] T. Spickermann et al., “Stripper Foil Temperatures and Electron Emission at the Los Alamos Proton Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB083, pp. 3455-3457.
[n] H. H. Chen et al., “TLS Booster Injection Scheme Exploration”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4016-4018. doi:10.18429/JACoW-IPAC2016-THPOW034
[n] G. Myneni, “Material Science Challenges for ILC Cavities”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUZMA03, pp. XX-XX.
[n] H. Qin, “Progress in Accelerator Ramp;D for High Energy Density Physics and Warm Dense Matter Applications”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAY05, pp. XX-XX.
[n] S. Aguilera, H. Hofmann, and P. Odier, “Comparative Study of Magnetic Properties for CERN Beam Current Transformers”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 127-130. doi:10.18429/JACoW-IBIC2016-MOPG37
[n] F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4219-4222. doi:10.18429/JACoW-IPAC2018-THPMF064
[n] B. Dehning et al., “LHC Beam Loss Detector Design: Simulations and Measurements”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN072, pp. 4198-4200.
[n] S. Cohen and P. Kowalski, “Precision sbRIO-based Magnet Power Supply Annunciator and Control Interface for Accelerator Control Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD068, pp. 3668-3670.
[n] P. K. Roy et al., “Development of a Li+ Alumino-Silicate Ion Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP033, pp. 426-428.
[n] D. H. Chang, Y. W. Jun, B. H. Oh, and S. J. Hong, “Data Acquisition and Control System for the Prototype KSTAR NB Heating System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP520, pp. XX-XX.
[n] C. Madec et al., “CEA Cryomodules Design for SARAF Phase 2”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 70-73. doi:10.18429/JACoW-SRF2017-MOPB011
[n] R. Assmann et al., “Design Status of the CLIC 3-TeV Beam Delivery System and Damping Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A20, pp. 522-526.
[n] B. Martin et al., “A New Injector Concept: The RFQ-Cyclotron Combination at ISL-Berlin”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-11, pp. 78-81.
[n] J. Wei et al., “Collective Effects and their Control at the Spallation Neutron Source Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE014, pp. 1067-1069.
[n] K. H. Hu, J. Chen, C. J. Wang, S. Y. Hsu, C. H. Kuo, and K. T. Hsu, “Applications of the Log-Ratio BPM in NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16048, pp. XX-XX.
[n] S. Kersten et al., “Detector Control System of the ATLAS Insertable B-Layer”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS021, pp. 364-367.
[n] J. Lund-Nielsen, N. Baboi, and W. Riesch, “Button Beam Position Monitors for FLASH”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC26, pp. 201-203.
[n] H. Homeyer, “ISL-Berlin, an Ion Beam Laboratory for Applications”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-09, pp. 70-73.
[n] J. C. Huang, K.-B. Liu, and Y. S. Wong, “Zero Voltage Switching of Two-switch Flyback-Forward Converter”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD063, pp. 3656-3658.
[n] M. A. Gallilee et al., “LHC Detector Vacuum System Consolidation for Long Shutdown 1 (LS1) in 2013-2014”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD025, pp. 2555-2557.
[n] S. Cohen and R. Stuewe, “Magnet Power Supply as a Network Object”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 929-932.
[n] Y. C. Lee, H.-P. Chang, and P. J. Chou, “Simulation Studies of Injection Scheme in TPS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC078, pp. 316-318.
[n] L. Soby, D. Belohrad, M. Krupa, P. Odier, J. F. Bergoz, and F. Stulle, “A New Integrating Current Transformer for the LHC”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF06, pp. 540-543.
[n] D. Neuffer, “Collective Longitudinal Motion in Intense Ion Beams”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2434-2437.
[n] P. Arndt, H. Bertschat, W. Jenter, and H.-E. Mahnke, “The New Van de Graaff Terminal for VICKSI”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1162-1165.
[n] K. H. Maier, “The Cyclotron as Seen by the Accelerated Particle”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper K-01, pp. 615-616.
[n] R. Tomas, M. Hayes, and F. Schmidt, “Completion of the Sextupole Driving Terms Measurement at the SPS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB081, pp. 2231-2233.
[n] A. Filipchenko et al., “SIBERIA-2: Work in Progress”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP007G, pp. 608-610.
[n] R. C. Sethi et al., “Commissioning Experience of the LPRFQ Accelerator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E205, pp. 301-303.
[n] C. H. Huang et al., “Synchronous Data Acquisition System for TPS and its Applications”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3186-3188. doi:10.18429/JACoW-IPAC2014-THPRO125
[n] K. N. Sjobak et al., “New Features of the 2017 SixTrack Release”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3815-3818. doi:10.18429/JACoW-IPAC2017-THPAB047
[n] V. G. Kurakin, “Recovery Process Stability Study in Energy Recovery Accelerator”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHA02, pp. 283-285.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Li Vecchi et al., “Distributed Optical Fiber Radiation Sensing at CERN”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2039-2042.
- T. Spickermann et al., “Stripper Foil Temperatures and Electron Emission at the Los Alamos Proton Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB083, pp. 3455-3457.
- H. H. Chen et al., “TLS Booster Injection Scheme Exploration”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4016-4018.
- G. Myneni, “Material Science Challenges for ILC Cavities”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUZMA03, pp. XX-XX.
- H. Qin, “Progress in Accelerator Ramp;D for High Energy Density Physics and Warm Dense Matter Applications”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THAY05, pp. XX-XX.
- S. Aguilera, H. Hofmann, and P. Odier, “Comparative Study of Magnetic Properties for CERN Beam Current Transformers”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 127-130.
- F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4219-4222.
- B. Dehning et al., “LHC Beam Loss Detector Design: Simulations and Measurements”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN072, pp. 4198-4200.
- S. Cohen and P. Kowalski, “Precision sbRIO-based Magnet Power Supply Annunciator and Control Interface for Accelerator Control Systems”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD068, pp. 3668-3670.
- P. K. Roy et al., “Development of a Li+ Alumino-Silicate Ion Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP033, pp. 426-428.
- D. H. Chang, Y. W. Jun, B. H. Oh, and S. J. Hong, “Data Acquisition and Control System for the Prototype KSTAR NB Heating System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP520, pp. XX-XX.
- C. Madec et al., “CEA Cryomodules Design for SARAF Phase 2”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 70-73.
- R. Assmann et al., “Design Status of the CLIC 3-TeV Beam Delivery System and Damping Rings”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A20, pp. 522-526.
- B. Martin et al., “A New Injector Concept: The RFQ-Cyclotron Combination at ISL-Berlin”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-11, pp. 78-81.
- J. Wei et al., “Collective Effects and their Control at the Spallation Neutron Source Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE014, pp. 1067-1069.
- K. H. Hu, J. Chen, C. J. Wang, S. Y. Hsu, C. H. Kuo, and K. T. Hsu, “Applications of the Log-Ratio BPM in NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16048, pp. XX-XX.
- S. Kersten et al., “Detector Control System of the ATLAS Insertable B-Layer”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS021, pp. 364-367.
- J. Lund-Nielsen, N. Baboi, and W. Riesch, “Button Beam Position Monitors for FLASH”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC26, pp. 201-203.
- H. Homeyer, “ISL-Berlin, an Ion Beam Laboratory for Applications”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-09, pp. 70-73.
- J. C. Huang, K.-B. Liu, and Y. S. Wong, “Zero Voltage Switching of Two-switch Flyback-Forward Converter”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD063, pp. 3656-3658.
- M. A. Gallilee et al., “LHC Detector Vacuum System Consolidation for Long Shutdown 1 (LS1) in 2013-2014”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD025, pp. 2555-2557.
- S. Cohen and R. Stuewe, “Magnet Power Supply as a Network Object”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 929-932.
- Y. C. Lee, H.-P. Chang, and P. J. Chou, “Simulation Studies of Injection Scheme in TPS Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC078, pp. 316-318.
- L. Soby, D. Belohrad, M. Krupa, P. Odier, J. F. Bergoz, and F. Stulle, “A New Integrating Current Transformer for the LHC”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF06, pp. 540-543.
- D. Neuffer, “Collective Longitudinal Motion in Intense Ion Beams”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2434-2437.
- P. Arndt, H. Bertschat, W. Jenter, and H.-E. Mahnke, “The New Van de Graaff Terminal for VICKSI”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1162-1165.
- K. H. Maier, “The Cyclotron as Seen by the Accelerated Particle”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper K-01, pp. 615-616.
- R. Tomas, M. Hayes, and F. Schmidt, “Completion of the Sextupole Driving Terms Measurement at the SPS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB081, pp. 2231-2233.
- A. Filipchenko et al., “SIBERIA-2: Work in Progress”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP007G, pp. 608-610.
- R. C. Sethi et al., “Commissioning Experience of the LPRFQ Accelerator”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E205, pp. 301-303.
- C. H. Huang et al., “Synchronous Data Acquisition System for TPS and its Applications”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3186-3188.
- K. N. Sjobak et al., “New Features of the 2017 SixTrack Release”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3815-3818.
- V. G. Kurakin, “Recovery Process Stability Study in Energy Recovery Accelerator”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHA02, pp. 283-285.
Back to search