Favourites
For Word
[n] V. Kain, K. Fuchsberger, B. Goddard, D. Karadeniz, M. Meddahi, and J. Wenninger, “Phase-dependant Coupling at Injection from Tilt Mismatch between the LHC and its Transfer Lines”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB065, pp. 1668-1670.
[n] A. Ijspeert and G. R. Stevenson, “Formulae for the Calculation of Energy Deposition Densities in the Graphite Dumps of the LHC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 533-536.
[n] E. Carlier et al., “A Novel Eddy Current Septum Magnet for SPS Extraction towards LHC and CNGS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B04, pp. 2370-2372.
[n] V. M. Biryukov, S. Bellucci, Y. Chesnokov, V. Guidi, and W. Scandale, “Creating Microbeams and Nanobeams by Channeling in Micro- and Nano-Structures”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB079, pp. 986-988.
[n] M. J. Barnes, G. D. Wait, E. Carlier, L. Ducimetiere, G. H. Schroder, and E. B. Vossenberg, “High Voltage Measurements on a Prototype PFN for the LHC Injection Kickers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP15, pp. 1509-1511.
[n] S. Sosa, “Accelerators for Quantum Technologies”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper THXE3, unpublished.
[n] B. J. A. Shepherd, “Permanent Magnets for Accelerators”, in Proc. IPAC'20, Caen, France, May 2020, pp. 1. doi:10.18429/JACoW-IPAC2020-MOVIRO05
[n] S. A. Veitzer and P. Stoltz, “Electron Cloud Buildup and Dissipation Models For PIP-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 626-628. doi:10.18429/JACoW-IPAC2015-MOPMA037
[n] R. Rassool et al., “The Australian X-Band electron test accelerator”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM112, unpublished.
[n] S. W. Jang, “Development of Button BPM Electronics for the Bunch by Bunch Feedback System of 4GSR”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 332-334. doi:10.18429/JACoW-IPAC2022-MOPOPT038
[n] S. De Santis et al., “Beam Diagnostic Requirements for the Next Generation Light Source”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO15, pp. 242-244.
[n] G. M. Arbique, B. G. Chidley, W. L. Michel, and B. H. Smith, “Optical Beam Sensors for RFQ1-1250”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-18, pp. 654-656.
[n] H. Dewa et al., “Electron Storage and Stretcher Ring, KSR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP093G, pp. 451-453.
[n] D. Liska et al., “Design of the Accelerating Structures for FMIT”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3052-3055.
[n] K. Fujii et al., “Construction of a Test Magnet for JLC Final Focus”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU438, pp. 408-410.
[n] S. Wang, S. Fu, and T. Kato, “Design Study of A MEBT With An Anti-Chopper for The JKJ”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO417, pp. 79-81.
[n] S. A. Veitzer and P. Stoltz, “Simulating Electron Cloud Evolution using Modulated Dielectric Models”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO068, pp. 1043-1045.
[n] G. Kube et al., “Transverse Beam Profile Imaging of Few-Micrometer Beam Sizes Based on a Scintillator Screen”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 330-334. doi:10.18429/JACoW-IBIC2015-TUPB012
[n] V. Danilov and A. Aleksandrov, “Proposal for Experiments on Wave Function Localisation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH041, pp. 1755-1757.
[n] S. De Silva, “Crabbing cavity system development for International Linear Collider”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 546-550. doi:10.18429/JACoW-LINAC2024-WEXA006
[n] E. Ikarios et al., “The Drive Beam Phase Stability in CTF3 and its Relation to the Bunch Compression Factor”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME039, pp. 1655-1657.
[n] D. Ungaro, A. Degiovanni, and P. Stabile, “LIGHT: A Linear Accelerator for Proton Therapy”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1282-1286. doi:10.18429/JACoW-NAPAC2016-FRB1IO02
[n] J. von Stecher, D. L. Bruhwiler, B. T. Schwartz, S. A. Veitzer, B. Han, and M. P. Stockli, “Reducing Emittance of a H- Beam in a Solenoid-based Low-energy Beam Transport through Numerical Modeling”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO059, pp. 2000-2002.
[n] H. BAcke et al., “First Experiments with a 100 Period Superconductive Undulator with a Period Length of 3.8 mm”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP16F, pp. 2234-2236.
[n] K. S. Tanaka et al., “Two-dimensional Beam Profile Monitor for Alpha Emitter”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 355-357. doi:10.18429/JACoW-IBIC2019-TUPP023
[n] G. H. Rees, D. J. Kelliher, S. Machida, C. R. Prior, and S. L. Sheehy, “A Model for a High-Power Scaling FFAG Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD020, pp. 409-411.
[n] E. Syresin, N. A. Morozov, and D. Shvidkiy, “Comparisons and Simulations of Superconducting Dipole Magnets for JINR Carbon Ion Gantry”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2174-2176. doi:10.18429/JACoW-IPAC2014-WEPRO092
[n] A. Brachmann, “Commissioning of LCLS-II”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 589-590. doi:10.18429/JACoW-LINAC2024-THZA001
[n] A. Aleksandrov and J. W. Staples, “3-D Calculations of Field Distribution in the MEBT Quad and Effect of the Fringe Field on Beam Dynamics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH037, pp. 1746-1748.
[n] J. A. Diaz Cruz, S. Biedron, R. Pirayesh, and S. Sosa, “Machine Learning-Based Tuning of Control Parameters for LLRF System of Superconducting Cavities”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 915-917. doi:10.18429/JACoW-IPAC2022-TUPOST027
[n] B. J. A. Shepherd and J. A. Clarke, “Magnetic Design of a Focusing Undulator for ALPHA-X”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF066, pp. 464-466.
[n] D. A. Dimitrov et al., “Modeling Cathode Roughness, Work Function, and Field Enhancement Effects on Electron Emission”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3869-3871. doi:10.18429/JACoW-IPAC2017-THPAB066
[n] R. Jung and R. J. Colchester, “Development of Beam Profile and Fast Position Monitors for the LEP Injector Linacs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1917-1920.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Kain, K. Fuchsberger, B. Goddard, D. Karadeniz, M. Meddahi, and J. Wenninger, “Phase-dependant Coupling at Injection from Tilt Mismatch between the LHC and its Transfer Lines”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB065, pp. 1668-1670.
- A. Ijspeert and G. R. Stevenson, “Formulae for the Calculation of Energy Deposition Densities in the Graphite Dumps of the LHC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 533-536.
- E. Carlier et al., “A Novel Eddy Current Septum Magnet for SPS Extraction towards LHC and CNGS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B04, pp. 2370-2372.
- V. M. Biryukov, S. Bellucci, Y. Chesnokov, V. Guidi, and W. Scandale, “Creating Microbeams and Nanobeams by Channeling in Micro- and Nano-Structures”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB079, pp. 986-988.
- M. J. Barnes, G. D. Wait, E. Carlier, L. Ducimetiere, G. H. Schroder, and E. B. Vossenberg, “High Voltage Measurements on a Prototype PFN for the LHC Injection Kickers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP15, pp. 1509-1511.
- S. Sosa, “Accelerators for Quantum Technologies”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper THXE3, unpublished.
- B. J. A. Shepherd, “Permanent Magnets for Accelerators”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 1.
- S. A. Veitzer and P. Stoltz, “Electron Cloud Buildup and Dissipation Models For PIP-II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 626-628.
- R. Rassool et al., “The Australian X-Band electron test accelerator”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM112, this conference.
- S. W. Jang, “Development of Button BPM Electronics for the Bunch by Bunch Feedback System of 4GSR”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 332-334.
- S. De Santis et al., “Beam Diagnostic Requirements for the Next Generation Light Source”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO15, pp. 242-244.
- G. M. Arbique, B. G. Chidley, W. L. Michel, and B. H. Smith, “Optical Beam Sensors for RFQ1-1250”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-18, pp. 654-656.
- H. Dewa et al., “Electron Storage and Stretcher Ring, KSR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP093G, pp. 451-453.
- D. Liska et al., “Design of the Accelerating Structures for FMIT”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3052-3055.
- K. Fujii et al., “Construction of a Test Magnet for JLC Final Focus”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU438, pp. 408-410.
- S. Wang, S. Fu, and T. Kato, “Design Study of A MEBT With An Anti-Chopper for The JKJ”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO417, pp. 79-81.
- S. A. Veitzer and P. Stoltz, “Simulating Electron Cloud Evolution using Modulated Dielectric Models”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO068, pp. 1043-1045.
- G. Kube et al., “Transverse Beam Profile Imaging of Few-Micrometer Beam Sizes Based on a Scintillator Screen”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 330-334.
- V. Danilov and A. Aleksandrov, “Proposal for Experiments on Wave Function Localisation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH041, pp. 1755-1757.
- S. De Silva, “Crabbing cavity system development for International Linear Collider”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 546-550.
- E. Ikarios et al., “The Drive Beam Phase Stability in CTF3 and its Relation to the Bunch Compression Factor”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME039, pp. 1655-1657.
- D. Ungaro, A. Degiovanni, and P. Stabile, “LIGHT: A Linear Accelerator for Proton Therapy”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1282-1286.
- J. von Stecher, D. L. Bruhwiler, B. T. Schwartz, S. A. Veitzer, B. Han, and M. P. Stockli, “Reducing Emittance of a H- Beam in a Solenoid-based Low-energy Beam Transport through Numerical Modeling”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO059, pp. 2000-2002.
- H. BAcke et al., “First Experiments with a 100 Period Superconductive Undulator with a Period Length of 3.8 mm”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP16F, pp. 2234-2236.
- K. S. Tanaka et al., “Two-dimensional Beam Profile Monitor for Alpha Emitter”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 355-357.
- G. H. Rees, D. J. Kelliher, S. Machida, C. R. Prior, and S. L. Sheehy, “A Model for a High-Power Scaling FFAG Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD020, pp. 409-411.
- E. Syresin, N. A. Morozov, and D. Shvidkiy, “Comparisons and Simulations of Superconducting Dipole Magnets for JINR Carbon Ion Gantry”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2174-2176.
- A. Brachmann, “Commissioning of LCLS-II”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 589-590.
- A. Aleksandrov and J. W. Staples, “3-D Calculations of Field Distribution in the MEBT Quad and Effect of the Fringe Field on Beam Dynamics”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH037, pp. 1746-1748.
- J. A. Diaz Cruz, S. Biedron, R. Pirayesh, and S. Sosa, “Machine Learning-Based Tuning of Control Parameters for LLRF System of Superconducting Cavities”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 915-917.
- B. J. A. Shepherd and J. A. Clarke, “Magnetic Design of a Focusing Undulator for ALPHA-X”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF066, pp. 464-466.
- D. A. Dimitrov et al., “Modeling Cathode Roughness, Work Function, and Field Enhancement Effects on Electron Emission”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3869-3871.
- R. Jung and R. J. Colchester, “Development of Beam Profile and Fast Position Monitors for the LEP Injector Linacs”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1917-1920.
Back to search