Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. E. Scarpine, N. Eddy, D. Frolov, M. A. Ibrahim, L. R. Prost, and R. M. Thurman-Keup, “Beam Instrumentation Challenges for the Fermilab PIP-II Accelerator”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 181-183. doi:10.18429/JACoW-IBIC2019-MOPP034
[n] C. G. Beetham, K. Kohler, C. R. C. B, and J.-B. Ribes, “The Transmission of Accelerator Timing Information around CERN”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 306-309. doi:10.18429/JACoW-ICALEPCS1991-S08NC05
[n] G. Baribaud et al., “Control Protocol: The Proposed New CERN Standard Access Procedure to Accelerator Equipment. Status Report”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 591-594. doi:10.18429/JACoW-ICALEPCS1991-S19SP01
[n] F. A. Emanov et al., “Status of VEPP-5 Injection Complex”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3796-3798. doi:10.18429/JACoW-IPAC2021-THPAB021
[n] L. Andolfato et al., “The ELT primary mirror fault detection, isolation, and recovery software”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1372-1379. doi:10.18429/JACoW-ICALEPCS2025-THBR001
[n] M. P. S. Nightingale, A. J. T. Holmes, and N. Griffiths, “Booster Linear Accelerators for Proton Therapy”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-36, pp. 398-400.
[n] S. Essabaa et al., “The Study of a New PARRNe Experimental Area using an Electron Linac close to the Orsay Tandem”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE032, pp. 888-890.
[n] A. Pronikov et al., “Electromagnetic Design of 402 MHz Normal Conducting Coaxial Window for SNS Facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4369-4372. doi:10.18429/JACoW-IPAC2023-THPA172
[n] A. A. Khan and C. A. Preissner, “Bringing the Ground Up (When Is Two Less Than One?)”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 182. doi:10.18429/JACoW-MEDSI2020-TUPC02
[n] A. Mondelli et al., “Three-Dimensional Simulations for Accelerator Physics Using ARGUS”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3267-3270.
[n] K. Hansz, H. Gaus, and H. Patel, “Ultra-fast switching utilizing an IVA topology for chopper applications”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 272-275. doi:10.18429/JACoW-NAPAC2025-MOP095
[n] J. Zemella, J. Roensch-Schulenburg, S. Schreiber, and M. Vogt, “Recommissioning of the FLASH injector and linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1816-1819. doi:10.18429/JACoW-IPAC2023-TUPL022
[n] D. Gorelov et al., “Beam Dynamics Studies at NSCL of the RIA Superconducting Driver Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE062, pp. 900-902.
[n] W. D. Kimura and L. C. Steinhauer, “Phase Control in High-Gradient Laser Particle Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2581-2584.
[n] J. Schaber et al., “Impact of Surface Cleaning on the Quantum Efficiency of Mg Photocathodes”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA005, unpublished.
[n] A. S. Chepurnov, I. V. Gribov, S. Yu. Morozov, A. V. Shumakov, and S. V. Zinoviev, “Moscow University Race-Track Microtron Control System: Ideas and Development”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 140-142. doi:10.18429/JACoW-ICALEPCS1991-S03SRD09
[n] Y. Luo et al., “Operational Measurement of Coupling by Skew Quadrupole Modulation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT184, pp. 1559-1561.
[n] A. Narayanan, “Third integer resonant extraction transit time simulation studies”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP051, unpublished.
[n] J. Lyles et al., “New concepts for a high power 805 MHz RF amplifier for LANSCE using Gallium Nitride semiconductors”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 238-240. doi:10.18429/JACoW-LINAC2024-MOPB088
[n] S. Kwon et al., “Development of the digital low level RF system for the LANSCE proton storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4212-4215. doi:10.18429/JACoW-IPAC2023-THPA107
[n] A. Pauluhn, “Stochastic Mappings for Density Calculations”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 911-914.
[n] W. P. McDowell et al., “Standards and the Design of the Advanced Photon Source Control System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 116-120. doi:10.18429/JACoW-ICALEPCS1991-S03SRD04
[n] M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “Interleaved Wide and Narrow Pulses for the KAON Factory 1 MHz Chopper”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1181-1184.
[n] F. Krienen, “Electron Wind in Strong Waveguide Fields”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2912-2915.
[n] L. Scibile, C. Martel, and P. Villeton Pachot, “A New Distributed Control System for the Consolidation of the CERN Tertiary Infrastructures”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 390-393. doi:10.18429/JACoW-ICALEPCS2017-TUPHA011
[n] V. M. Kotov and R. A. Pose, “Control System for a Heavy-Ion Accelerator Complex K4 - K10”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 47-49. doi:10.18429/JACoW-ICALEPCS1991-S01SRA12
[n] M. Haworth et al., “Physic Requirements of Commissioning Diagnostics for SSCL Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2124-2127.
[n] B. Rusnak, M. Hall, and S. Shen, “Rotating Aperture Deuterium Gas Cell Development for High Brightness Neutron Production”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE029, pp. 2074-2076.
[n] N. Stapley and W. Sliwinski, “Applying Agile Project Management for Accelerator Controls Software”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB05, pp. 612-614.
[n] M. Schuett, U. Ratzinger, and M. Syha, “Progress of the Modulated 325 MHz Ladder RFQ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 952-954. doi:10.18429/JACoW-IPAC2018-TUPAK001
[n] D. A. Kogut, S. Fadeev, and N. K. Kuksanov, “Improving of Uniformity of the Electron-Beam Treatment of Materials by ELV Accelerators”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC056, pp. 557-559.
[n] G. Eremeev et al., “Achieving 10 MV cryomodule with Nb3Sn cavities”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper THYN02, unpublished.
[n] E. S. McCrory, V. D. Shiltsev, A. J. Slaughter, and A. Xiao, “Fitting the Luminosity Decay in the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP036, pp. 2434-2436.
[n] M. Dubois et al., “MONOBOB II : Latest Results of Monocharged Ion Source for SPIRAL2 Project”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT013, pp. 64-66.
[n] G. V. Dolbilov et al., “Status of the Test Facility for Studies FEL Bunching Technique for CLIC Driving Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP057G, pp. 730-732.
[n] J. C. Oliveira, A. Diaz Fontalva, and L. Arnaudon, “The PLC Control System for the RF Upgrade of the Super Proton Synchrotron”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 457. doi:10.18429/JACoW-ICALEPCS2019-MOPHA103
[n] M. M. Gordon and V. Taivassalo, “Nonlinear Effects of Focusing Bars Used in the Extraction Systems of Superconducting Cyclotrons”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2447-2450.
[n] M. Lamont, R. Bailey, P. Collier, G. de Rijk, A. Belk, and M. Tarrant, “The Impact of New Accelerator Control Software on LEP Performance”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1937-1940.
[n] F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866.
[n] R. Kazimi, J. Grames, A. Hofler, C. Hernandez-Garcia, and G. Palacios Serrano, “Polarized electron injector for positron production at CEBAF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2727-2730. doi:10.18429/JACoW-IPAC2023-WEPA035
[n] V. N. Boriskin et al., “POWER SUPPLY CONTROL SYSTEM FOR THE LINAC OF THE NESTOR STORAGE RING”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH04, pp. XX-XX.
[n] D. A. Kogut, S. Fadeev, N. K. Kuksanov, P. I. Nemytov, and R. A. Salimov, “Extended Scope of Application of Industrial ELV Accelerator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WECA06, pp. 137-139.
[n] C. E. Hess, H. A. Schwettman, and T. I. Smith, “Harmonically Resonant Cavities for High Brightness Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2924-2927.
[n] A. Reiter, A. Peters, and M. Schwickert, “Integrated Beam Diagnostics Systems for HICAT and CNAO”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH015, pp. 1028-1030.
[n] A. V. Rauchas et al., “Betatron Tune Measurement at the Argonne Rapid Cycling Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2331-2334.
[n] J. B. Murphy, S. Krinsky, and R. L. Gluckstern, “Longitudinal Wakefield for Synchrotron Radiation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ14, pp. 2980-2982.
[n] S. L. Shope et al., “RADLAC II/SMILE Performance with a Magnetically Insulated Voltage Adder”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3129-3132.
[n] L. Crincoli et al., “Characterization of plasma-discharge capillaries for plasma-based particle acceleration”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1545-1548. doi:10.18429/JACoW-IPAC2023-TUPA097
[n] Y. A. Fomin, V. Korchuganov, A. G. Valentinov, R. Hrovatin, P. Leban, and N. I. Moseiko, “New Electron Beam Reference Orbit Measurement System at Dedicated Synchrotron Radiation Light Source SIBERIA-2”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD053, pp. 662-664.
[n] J. Safranek, O. Singh, and L. Solomon, “Orbit Stability Improvements at the NSLS X-Ray Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ19, pp. 2711-2713.
[n] W. Y. Lai et al., “Auto-alignment System and CalibrationPprocedure in TPS Girder System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP088, pp. 2918-2920.
[n] I. L. Sheinman and O. S. Alekseeva, “Wakefield Undulator Based on a Sinusoidal Dielectric Waveguide”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 274-276. doi:10.18429/JACoW-RuPAC2021-TUPSB22
[n] Yu. I. Maltseva et al., “Current Status of VEPP-5 Injection Complex”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 37-40. doi:10.18429/JACoW-RuPAC2021-TUA02
[n] A. Narayanan et al., “Machine Learning for Slow Spill Regulation in the Fermilab Delivery Ring for Mu2e”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 214-217. doi:10.18429/JACoW-NAPAC2022-MOPA75
[n] T. Xu et al., “Low-emittance SRF photo-injector prototype cryomodule for the LCLS-II high-energy upgrade: design and fabrication”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1396-1399. doi:10.18429/JACoW-IPAC2023-TUPA028
[n] S. Brockhauser, V. Bugris, K. Csank??, Zs. Fil?íkovics, P. Acs, and V. Hanyecz, “Extending Tango Control System With Kepler Workflow, Presented on an X-Ray Crystallographic Application”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1167. doi:10.18429/JACoW-ICALEPCS2019-WEPHA038
[n] K. Yamakawa, M. Ishii, M. Yamaga, and T. Fukui, “Development of an EtherCAT-based control system for an In-Vacuum Undulator for SPring-8-II”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 362-366. doi:10.18429/JACoW-ICALEPCS2025-TUMG004
[n] C. Hovater et al., “Commissioning and Operation Experience with the CEBAF Recirculation Arc Beam Transport System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 587-590.
For LaTeX
Use Complete Form
For BibTeX
References
- V. E. Scarpine, N. Eddy, D. Frolov, M. A. Ibrahim, L. R. Prost, and R. M. Thurman-Keup, “Beam Instrumentation Challenges for the Fermilab PIP-II Accelerator”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 181-183.
- C. G. Beetham, K. Kohler, C. R. C. B, and J.-B. Ribes, “The Transmission of Accelerator Timing Information around CERN”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S08NC05, pp. 306-309.
- G. Baribaud et al., “Control Protocol: The Proposed New CERN Standard Access Procedure to Accelerator Equipment. Status Report”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S19SP01, pp. 591-594.
- F. A. Emanov et al., “Status of VEPP-5 Injection Complex”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3796-3798.
- L. Andolfato et al., “The ELT primary mirror fault detection, isolation, and recovery software”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1372-1379.
- M. P. S. Nightingale, A. J. T. Holmes, and N. Griffiths, “Booster Linear Accelerators for Proton Therapy”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-36, pp. 398-400.
- S. Essabaa et al., “The Study of a New PARRNe Experimental Area using an Electron Linac close to the Orsay Tandem”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE032, pp. 888-890.
- A. Pronikov et al., “Electromagnetic Design of 402 MHz Normal Conducting Coaxial Window for SNS Facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA172, pp. 4369-4372.
- A. A. Khan and C. A. Preissner, “Bringing the Ground Up (When Is Two Less Than One?)”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 182.
- A. Mondelli et al., “Three-Dimensional Simulations for Accelerator Physics Using ARGUS”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3267-3270.
- K. Hansz, H. Gaus, and H. Patel, “Ultra-fast switching utilizing an IVA topology for chopper applications”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 272-275.
- J. Zemella, J. Roensch-Schulenburg, S. Schreiber, and M. Vogt, “Recommissioning of the FLASH injector and linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL022, pp. 1816-1819.
- D. Gorelov et al., “Beam Dynamics Studies at NSCL of the RIA Superconducting Driver Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE062, pp. 900-902.
- W. D. Kimura and L. C. Steinhauer, “Phase Control in High-Gradient Laser Particle Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2581-2584.
- J. Schaber et al., “Impact of Surface Cleaning on the Quantum Efficiency of Mg Photocathodes”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA005, unpublished.
- A. S. Chepurnov, I. V. Gribov, S. Yu. Morozov, A. V. Shumakov, and S. V. Zinoviev, “Moscow University Race-Track Microtron Control System: Ideas and Development”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S03SRD09, pp. 140-142.
- Y. Luo et al., “Operational Measurement of Coupling by Skew Quadrupole Modulation”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT184, pp. 1559-1561.
- A. Narayanan, “Third integer resonant extraction transit time simulation studies”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP051, unpublished.
- J. Lyles et al., “New concepts for a high power 805 MHz RF amplifier for LANSCE using Gallium Nitride semiconductors”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 238-240.
- S. Kwon et al., “Development of the digital low level RF system for the LANSCE proton storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA107, pp. 4212-4215.
- A. Pauluhn, “Stochastic Mappings for Density Calculations”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 911-914.
- W. P. McDowell et al., “Standards and the Design of the Advanced Photon Source Control System”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S03SRD04, pp. 116-120.
- M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “Interleaved Wide and Narrow Pulses for the KAON Factory 1 MHz Chopper”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1181-1184.
- F. Krienen, “Electron Wind in Strong Waveguide Fields”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2912-2915.
- L. Scibile, C. Martel, and P. Villeton Pachot, “A New Distributed Control System for the Consolidation of the CERN Tertiary Infrastructures”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 390-393.
- V. M. Kotov and R. A. Pose, “Control System for a Heavy-Ion Accelerator Complex K4 - K10”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S01SRA12, pp. 47-49.
- M. Haworth et al., “Physic Requirements of Commissioning Diagnostics for SSCL Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2124-2127.
- B. Rusnak, M. Hall, and S. Shen, “Rotating Aperture Deuterium Gas Cell Development for High Brightness Neutron Production”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE029, pp. 2074-2076.
- N. Stapley and W. Sliwinski, “Applying Agile Project Management for Accelerator Controls Software”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB05, pp. 612-614.
- M. Schuett, U. Ratzinger, and M. Syha, “Progress of the Modulated 325 MHz Ladder RFQ”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 952-954.
- D. A. Kogut, S. Fadeev, and N. K. Kuksanov, “Improving of Uniformity of the Electron-Beam Treatment of Materials by ELV Accelerators”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC056, pp. 557-559.
- G. Eremeev et al., “Achieving 10 MV cryomodule with Nb3Sn cavities”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper THYN02, unpublished.
- E. S. McCrory, V. D. Shiltsev, A. J. Slaughter, and A. Xiao, “Fitting the Luminosity Decay in the Tevatron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP036, pp. 2434-2436.
- M. Dubois et al., “MONOBOB II : Latest Results of Monocharged Ion Source for SPIRAL2 Project”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT013, pp. 64-66.
- G. V. Dolbilov et al., “Status of the Test Facility for Studies FEL Bunching Technique for CLIC Driving Beam”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP057G, pp. 730-732.
- J. C. Oliveira, A. Diaz Fontalva, and L. Arnaudon, “The PLC Control System for the RF Upgrade of the Super Proton Synchrotron”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 457.
- M. M. Gordon and V. Taivassalo, “Nonlinear Effects of Focusing Bars Used in the Extraction Systems of Superconducting Cyclotrons”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2447-2450.
- M. Lamont, R. Bailey, P. Collier, G. de Rijk, A. Belk, and M. Tarrant, “The Impact of New Accelerator Control Software on LEP Performance”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1937-1940.
- F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866.
- R. Kazimi, J. Grames, A. Hofler, C. Hernandez-Garcia, and G. Palacios Serrano, “Polarized electron injector for positron production at CEBAF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA035, pp. 2727-2730.
- V. N. Boriskin et al., “POWER SUPPLY CONTROL SYSTEM FOR THE LINAC OF THE NESTOR STORAGE RING”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH04, pp. XX-XX.
- D. A. Kogut, S. Fadeev, N. K. Kuksanov, P. I. Nemytov, and R. A. Salimov, “Extended Scope of Application of Industrial ELV Accelerator”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WECA06, pp. 137-139.
- C. E. Hess, H. A. Schwettman, and T. I. Smith, “Harmonically Resonant Cavities for High Brightness Beams”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2924-2927.
- A. Reiter, A. Peters, and M. Schwickert, “Integrated Beam Diagnostics Systems for HICAT and CNAO”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH015, pp. 1028-1030.
- A. V. Rauchas et al., “Betatron Tune Measurement at the Argonne Rapid Cycling Synchrotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2331-2334.
- J. B. Murphy, S. Krinsky, and R. L. Gluckstern, “Longitudinal Wakefield for Synchrotron Radiation”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ14, pp. 2980-2982.
- S. L. Shope et al., “RADLAC II/SMILE Performance with a Magnetically Insulated Voltage Adder”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3129-3132.
- L. Crincoli et al., “Characterization of plasma-discharge capillaries for plasma-based particle acceleration”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA097, pp. 1545-1548.
- Y. A. Fomin, V. Korchuganov, A. G. Valentinov, R. Hrovatin, P. Leban, and N. I. Moseiko, “New Electron Beam Reference Orbit Measurement System at Dedicated Synchrotron Radiation Light Source SIBERIA-2”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD053, pp. 662-664.
- J. Safranek, O. Singh, and L. Solomon, “Orbit Stability Improvements at the NSLS X-Ray Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ19, pp. 2711-2713.
- W. Y. Lai et al., “Auto-alignment System and CalibrationPprocedure in TPS Girder System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP088, pp. 2918-2920.
- I. L. Sheinman and O. S. Alekseeva, “Wakefield Undulator Based on a Sinusoidal Dielectric Waveguide”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 274-276.
- Yu. I. Maltseva et al., “Current Status of VEPP-5 Injection Complex”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 37-40.
- A. Narayanan et al., “Machine Learning for Slow Spill Regulation in the Fermilab Delivery Ring for Mu2e”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 214-217.
- T. Xu et al., “Low-emittance SRF photo-injector prototype cryomodule for the LCLS-II high-energy upgrade: design and fabrication”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA028, pp. 1396-1399.
- S. Brockhauser, V. Bugris, K. Csank??, Zs. Fil?íkovics, P. Acs, and V. Hanyecz, “Extending Tango Control System With Kepler Workflow, Presented on an X-Ray Crystallographic Application”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1167.
- K. Yamakawa, M. Ishii, M. Yamaga, and T. Fukui, “Development of an EtherCAT-based control system for an In-Vacuum Undulator for SPring-8-II”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 362-366.
- C. Hovater et al., “Commissioning and Operation Experience with the CEBAF Recirculation Arc Beam Transport System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 587-590.
Back to search