Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hayano, “The KEK Accelerator Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY03T, pp. 27-31.
[n] K. G. Meisner, J. E. Griffin, E. F. Higgins, and S. P. Jachim, “A New Low Level RF System for the Fermilab Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4061-4063.
[n] M. J. Chin and J. A. Hinkson, “PEP-II Bunch-by-Bunch Current Monitor”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P059, pp. 2235-2237.
[n] L. M. Sevryukova, A. M. Korotkov, and S. M. Pesterev, “Feasibilities of the Methods of Anode Oxipolishing and Anodization in the Technology of Superconducting Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I28, pp. XX-XX.
[n] S. Di Mitri and M. Cornacchia, “CSR-Immune Arc Compressors for Recirculating Accelerators Driving High Brightness Electron Beams”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1108-1111. doi:10.18429/JACoW-NAPAC2016-THPOA06
[n] A. Morgillo et al., “Superconducting 8 cm Corrector Magnets for the Relativistic Heavy Ion Collider (RHIC)”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ03, pp. 1393-1395.
[n] N. Tsoupas, J. Claus, E. Rodger, and H. W. Foelsche, “Design of a Lambertson Injection Magnet for the RHIC Machine”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2895-2898.
[n] Y.-C. Chae, K. Harkay, and X. Sun, “Horizontal Coupling Impedance of the APS Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB002, pp. 3011-3013.
[n] C. Montag, T. Okugi, and J. Urakawa, “Beam Lifetimes in the ATF Damping Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D037, pp. 483-485.
[n] R. T. P. D'Arcy, “Energy Spread Control in Plasma Wakefield Accelerators”, in Proc. IPAC'20, Caen, France, May 2020, paper TUVIR05, pp. XX-XX.
[n] R. A. Kenefick, “Report on EBIS Development at Texas AM”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-11, pp. 2167-2170.
[n] N. Hubert, L. Cassinari, J.-C. Denard, P. Lebasque, L. S. Nadolski, and D. Pedeau, “SOLEIL Beam Orbit Stability Improvements”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD78, pp. 488-490.
[n] R. J. Bennett, J. M. Lefebvre, and B. A. Trickett, “The ESRF Vacuum System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1243-1246.
[n] K. Furukawa, “Modern Accelerator Control Systems”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUZAC02, pp. 873-877.
[n] S. C. Leemann, M. Aiba, J. Bengtsson, L. O. Dallin, F. Sannibale, and A. Streun, “Progress on a Novel 7BA Lattice for a 196-m Circumference Diffraction-Limited Soft X-Ray Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1635-1638. doi:10.18429/JACoW-IPAC2019-TUPGW095
[n] L. Zhang, “Thermal Deformation Modelling Attempt of a Storage Ring Vacuum Vessel”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5B13, pp. 2486-2488.
[n] M. Kwon, “Status of the Raon Heavy Ion Accelerator Project”, in Proc. IPAC'20, Caen, France, May 2020, paper TUVIR17, pp. XX-XX.
[n] J. Y. Tang, H. H. Li, and Y. J. Yuan, “Matching Modes Between HIRFL and CSR”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-16, pp. XX-XX.
[n] T. Overett, E. Bowles, D. B. Remsen, R. E. Smith, and G. E. Thomas, “Phase Locked Magnetrons as Accelerator RF Sources”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1464-1466.
[n] G. Boicourt and J. Merson, “Calculations on Permanent-Magnet Quadrupoles with Nonrectangular Cross Section”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-33, pp. 391-393.
[n] R. Katayama et al., “High-Q/High-G R&D at KEK Using 9-Cell TESLA-Shaped Niobium Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 268. doi:10.18429/JACoW-SRF2021-MOPCAV006
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hayano, “The KEK Accelerator Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY03T, pp. 27-31.
- K. G. Meisner, J. E. Griffin, E. F. Higgins, and S. P. Jachim, “A New Low Level RF System for the Fermilab Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4061-4063.
- M. J. Chin and J. A. Hinkson, “PEP-II Bunch-by-Bunch Current Monitor”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P059, pp. 2235-2237.
- L. M. Sevryukova, A. M. Korotkov, and S. M. Pesterev, “Feasibilities of the Methods of Anode Oxipolishing and Anodization in the Technology of Superconducting Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I28, pp. XX-XX.
- S. Di Mitri and M. Cornacchia, “CSR-Immune Arc Compressors for Recirculating Accelerators Driving High Brightness Electron Beams”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1108-1111.
- A. Morgillo et al., “Superconducting 8 cm Corrector Magnets for the Relativistic Heavy Ion Collider (RHIC)”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ03, pp. 1393-1395.
- N. Tsoupas, J. Claus, E. Rodger, and H. W. Foelsche, “Design of a Lambertson Injection Magnet for the RHIC Machine”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2895-2898.
- Y.-C. Chae, K. Harkay, and X. Sun, “Horizontal Coupling Impedance of the APS Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB002, pp. 3011-3013.
- C. Montag, T. Okugi, and J. Urakawa, “Beam Lifetimes in the ATF Damping Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D037, pp. 483-485.
- R. T. P. D'Arcy, “Energy Spread Control in Plasma Wakefield Accelerators”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper TUVIR05, pp. XX-XX.
- R. A. Kenefick, “Report on EBIS Development at Texas AM”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-11, pp. 2167-2170.
- N. Hubert, L. Cassinari, J.-C. Denard, P. Lebasque, L. S. Nadolski, and D. Pedeau, “SOLEIL Beam Orbit Stability Improvements”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD78, pp. 488-490.
- R. J. Bennett, J. M. Lefebvre, and B. A. Trickett, “The ESRF Vacuum System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1243-1246.
- K. Furukawa, “Modern Accelerator Control Systems”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUZAC02, pp. 873-877.
- S. C. Leemann, M. Aiba, J. Bengtsson, L. O. Dallin, F. Sannibale, and A. Streun, “Progress on a Novel 7BA Lattice for a 196-m Circumference Diffraction-Limited Soft X-Ray Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1635-1638.
- L. Zhang, “Thermal Deformation Modelling Attempt of a Storage Ring Vacuum Vessel”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP5B13, pp. 2486-2488.
- M. Kwon, “Status of the Raon Heavy Ion Accelerator Project”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper TUVIR17, pp. XX-XX.
- J. Y. Tang, H. H. Li, and Y. J. Yuan, “Matching Modes Between HIRFL and CSR”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P1-16, pp. XX-XX.
- T. Overett, E. Bowles, D. B. Remsen, R. E. Smith, and G. E. Thomas, “Phase Locked Magnetrons as Accelerator RF Sources”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1464-1466.
- G. Boicourt and J. Merson, “Calculations on Permanent-Magnet Quadrupoles with Nonrectangular Cross Section”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-33, pp. 391-393.
- R. Katayama et al., “High-Q/High-G R&D at KEK Using 9-Cell TESLA-Shaped Niobium Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 268.
Back to search