Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Fagotti et al., “The Couplers for the IFMIF-EVEDA RFQ High Power Test Stand at LNL: Design, Construction and Operation”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP093, pp. 643-645.
[n] P. Manini, A. Bonucci, L. Caruso, A. Conte, F. Siviero, and L. Viale, “A Novel Approach in UHV Pumping of Accelerators: the NEXTorr® Pump”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS010, pp. 1536-1538.
[n] A. Pepato et al., “Construction of the Modules of the IFMIF-EVEDA RFQ”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP087, pp. 257-260.
[n] G. Bassato, R. Ponchia, and I. Ben-Zvi, “A Microprocessor Based Controller for Superconducting Resonators”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G04, pp. XX-XX.
[n] K. Moon and M. Chung, “Numerical Studies of Self Modulation Instability in the Beam-driven Plasma Wakefield Experiments”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2585-2587. doi:10.18429/JACoW-IPAC2016-WEPMY017
[n] J. A. Martin et al., “Superconducting Conversion of the Oak Ridge Isochronous Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2092-2095.
[n] T.-Y. Lee, J. Lee, S. Shin, C. U. Choi, and M. Chung, “Cyclotrons for Accelerator-Driven Systems”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 305-307. doi:10.18429/JACoW-NAPAC2016-TUPOA10
[n] P. Manini, A. Bonucci, A. Conte, and S. Raimondi, “Deposition of Non Evaporable Getter (NEG) Films on Vacuum Chambers for High Energy Machines and Synchrotron Radiation Sources”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH178, pp. 1435-1437.
[n] A. Bonucci, A. Conte, P. Manini, and S. Raimondi, “Measurement of the Sorption Characteristics of NEG Coated Pipes: The Transmission Factor Method”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH177, pp. 1432-1434.
[n] L. O. Dallin and D. G. Bilbrough, “Multi-function Corrector Magnet”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB001, pp. 274-276.
[n] W. V. Drachenfels et al., “Acceleration of Polarized Electrons in ELSA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP31G, pp. 433-435.
[n] A. Conte, A. Bonucci, P. Manini, and S. Raimondi, “NEG Coating of Pipes for RHIC : An Example of Industrialization Process”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN027, pp. 212-214.
[n] S. W. Jang et al., “Developments of 4GSR BPM Electronics”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 87-89. doi:10.18429/JACoW-IBIC2023-MOP030
[n] K. Moon, M. Chung, and P. Muggli, “Determination of the Phase of Wakefield Driven by a Self-Modulated Proton Bunch in Plasma”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1710-1712. doi:10.18429/JACoW-IPAC2021-TUPAB138
[n] W. Fischer et al., “eRHIC in Electron-Ion Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 738-741. doi:10.18429/JACoW-IPAC2019-MOPRB072
[n] D. Choe, M. Chung, S. Y. Kim, S. G. Arutunian, A. V. Margaryan, and E. G. Lazareva, “Beam Halo Measurements using Vibrating Wire at the KOMAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 680-682. doi:10.18429/JACoW-IPAC2016-MOPOR037
[n] J. Hyun et al., “Commissioning and First Results From a Channeling-Radiation Experiment at FAST”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 428-431. doi:10.18429/JACoW-NAPAC2016-TUPOA73
[n] K. Moon, M. Cho, H. Yang, C. H. Shim, and I. Nam, “Electron beam shaping by laser heater for attosecond pulse duration X-ray free electron laser”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG42, unpublished.
[n] P. Park, M. Chung, and B. K. Shin, “Highly Charged Argon Ion Spectroscopy Experiment at PAL-XFEL with the UNIST-EBIT”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR4WH02, unpublished.
[n] A. Bonucci, A. Conte, P. Manini, and S. Raimondi, “Critical Issues in Ensuring Reproducible and Reliable Deposition of NEG Coatings for Particle Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN026, pp. 209-211.
[n] S. W. Jang et al., “The Development of Button Type BPM Electronics for RAON”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 362-364. doi:10.18429/JACoW-IPAC2017-MOPAB100
[n] S. H. Kim et al., “PAL XFEL Pulse Modulator System Test Results Using a High Precision CCPS”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 89-92. doi:10.18429/JACoW-FEL2015-MOP029
[n] C. A. Ludemann, J. M. Domaschko, and S. W. Mosko, “Computer Control System for ORIC”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 500-510.
[n] C. A. Ludemann, J. M. Domaschko, K. Hagemann, and S. W. Mosko, “Computer Control of the Oak Ridge Isochronous Cyclotron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 618-621.
[n] A. Tsymbaliuk et al., “Current Status of the ALPI Linac Upgrade for the SPES Facilities at INFN LNL”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 11. doi:10.18429/JACoW-SRF2021-SUPCAV005
[n] V. Rieker, J. J. Bateman, R. Corsini, L. A. Dyks, W. Farabolini, and P. Korysko, “VHEE High Dose Rate Dosimetry Studies in CLEAR”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3026-3029. doi:10.18429/JACoW-IPAC2022-THPOMS031
For LaTeX
Use Complete Form
For BibTeX
References
- E. Fagotti et al., “The Couplers for the IFMIF-EVEDA RFQ High Power Test Stand at LNL: Design, Construction and Operation”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP093, pp. 643-645.
- P. Manini, A. Bonucci, L. Caruso, A. Conte, F. Siviero, and L. Viale, “A Novel Approach in UHV Pumping of Accelerators: the NEXTorr® Pump”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS010, pp. 1536-1538.
- A. Pepato et al., “Construction of the Modules of the IFMIF-EVEDA RFQ”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP087, pp. 257-260.
- G. Bassato, R. Ponchia, and I. Ben-Zvi, “A Microprocessor Based Controller for Superconducting Resonators”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G04, pp. XX-XX.
- K. Moon and M. Chung, “Numerical Studies of Self Modulation Instability in the Beam-driven Plasma Wakefield Experiments”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2585-2587.
- J. A. Martin et al., “Superconducting Conversion of the Oak Ridge Isochronous Cyclotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2092-2095.
- T.-Y. Lee, J. Lee, S. Shin, C. U. Choi, and M. Chung, “Cyclotrons for Accelerator-Driven Systems”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 305-307.
- P. Manini, A. Bonucci, A. Conte, and S. Raimondi, “Deposition of Non Evaporable Getter (NEG) Films on Vacuum Chambers for High Energy Machines and Synchrotron Radiation Sources”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH178, pp. 1435-1437.
- A. Bonucci, A. Conte, P. Manini, and S. Raimondi, “Measurement of the Sorption Characteristics of NEG Coated Pipes: The Transmission Factor Method”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH177, pp. 1432-1434.
- L. O. Dallin and D. G. Bilbrough, “Multi-function Corrector Magnet”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB001, pp. 274-276.
- W. V. Drachenfels et al., “Acceleration of Polarized Electrons in ELSA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP31G, pp. 433-435.
- A. Conte, A. Bonucci, P. Manini, and S. Raimondi, “NEG Coating of Pipes for RHIC : An Example of Industrialization Process”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN027, pp. 212-214.
- S. W. Jang et al., “Developments of 4GSR BPM Electronics”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP030, pp. 87-89.
- K. Moon, M. Chung, and P. Muggli, “Determination of the Phase of Wakefield Driven by a Self-Modulated Proton Bunch in Plasma”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1710-1712.
- W. Fischer et al., “eRHIC in Electron-Ion Operation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 738-741.
- D. Choe, M. Chung, S. Y. Kim, S. G. Arutunian, A. V. Margaryan, and E. G. Lazareva, “Beam Halo Measurements using Vibrating Wire at the KOMAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 680-682.
- J. Hyun et al., “Commissioning and First Results From a Channeling-Radiation Experiment at FAST”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 428-431.
- K. Moon, M. Cho, H. Yang, C. H. Shim, and I. Nam, “Electron beam shaping by laser heater for attosecond pulse duration X-ray free electron laser”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG42, unpublished.
- P. Park, M. Chung, and B. K. Shin, “Highly Charged Argon Ion Spectroscopy Experiment at PAL-XFEL with the UNIST-EBIT”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR4WH02, unpublished.
- A. Bonucci, A. Conte, P. Manini, and S. Raimondi, “Critical Issues in Ensuring Reproducible and Reliable Deposition of NEG Coatings for Particle Accelerators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN026, pp. 209-211.
- S. W. Jang et al., “The Development of Button Type BPM Electronics for RAON”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 362-364.
- S. H. Kim et al., “PAL XFEL Pulse Modulator System Test Results Using a High Precision CCPS”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 89-92.
- C. A. Ludemann, J. M. Domaschko, and S. W. Mosko, “Computer Control System for ORIC”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 500-510.
- C. A. Ludemann, J. M. Domaschko, K. Hagemann, and S. W. Mosko, “Computer Control of the Oak Ridge Isochronous Cyclotron”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 618-621.
- A. Tsymbaliuk et al., “Current Status of the ALPI Linac Upgrade for the SPES Facilities at INFN LNL”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 11.
- V. Rieker, J. J. Bateman, R. Corsini, L. A. Dyks, W. Farabolini, and P. Korysko, “VHEE High Dose Rate Dosimetry Studies in CLEAR”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3026-3029.
Back to search