Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Goetz et al., “Simulation Methods for Transverse Beam Size Measurements Using the Heterodyne Near Field Speckles of Hard X-rays”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 272-275. doi:10.18429/JACoW-IBIC2020-THPP33
[n] B. Bolzon, S. Bai, P. Bambade, A. Jeremie, and G. R. White, “Linear Collider Test Facility: Twiss Parameter Analysis at the IP/Post-IP location of the ATF2 beam line”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD077, pp. 4458-4460.
[n] M. E. Saleski and E. Carrone, “Configuration Management Plan for Interlock Safety Systems at the Linac Coherent Light Source (LCLS)”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP106, pp. XX-XX.
[n] D. Douglas et al., “Architectural Considerations for Recirculated and Energy-Recovered Hard XFEL Drivers”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4560-4563. doi:10.18429/JACoW-IPAC2018-THPMK106
[n] F. Collamati, M. Boscolo, H. Burkhardt, and R. Kersevan, “Synchrotron Radiation Backgrounds for the FCC-hh Experiments”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2031-2034. doi:10.18429/JACoW-IPAC2017-TUPVA004
[n] J. F. Schmidt, W. Hillert, M. Schedler, and J.-P. Thiry, “Measurement of Momentum Compaction Factor via Depolarizing Resonances at ELSA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 811-813. doi:10.18429/JACoW-IPAC2015-MOPHA015
[n] T. Lef?¿vre, “The CLIC Test Facility 3 Instrumentation”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper WEIOTIO02, pp. 323-331.
[n] A. S. Fisher, A. Goldblatt, and T. Lef?¿vre, “The LHC Synchrotron-Light Monitors”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB03, pp. 164-166.
[n] V. D. Burlakov et al., “Status of the Construction of the INR Meson Factory”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0002, pp. 9-13.
[n] V. F. Khan and R. M. Jones, “Wake-field Suppression in the CLIC Main Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP089, pp. 2725-2727.
[n] R. B. Palmer et al., “Higher Luminosity eRHIC Ring-Ring Options and Upgrade”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2472-2474. doi:10.18429/JACoW-IPAC2016-WEPMW023
[n] O. Pinazza et al., “How Low-Cost Devices Can Help on the Way to ALICE Upgrade”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 114-117. doi:10.18429/JACoW-ICALEPCS2017-MODPL07
[n] U. Happek, M. James, K. Jordan, G. A. Krafft, P. Piot, and J. Song, “Measuring and Characterizing Ultrashort Bunches in the Jefferson Lab Free-Electron Laser”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP24G, pp. 1580-1582.
[n] S. Mitsunobu et al., “Activities of Superconducting Cavity for KEK B-Factory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J05, pp. XX-XX.
[n] Yu. Zuev et al., “A 5 to 20 MeV Electron Linear Accelerator for Metrology”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 103-105. doi:10.18429/JACoW-RUPAC2016-WECDMH03
[n] Y. Yamamoto et al., “Recent Results of the Vertical Test for 1.3GHz Superconducting 9-Cell Cavities at KEK-STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP074, pp. 996-998.
[n] G. Ambrosio, G. Bellomo, and L. Rossi, “A 300 T/m NbSn Quadrupole for the Low-beta Insertions of the LHC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP088G, pp. 2290-2292.
[n] P. Emma, G. Annala, and B. Hendricks, “Fermilab's Automated Accelerator Start-Up Program”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1940-1943.
[n] S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149.
[n] A. Benot-Morell et al., “Design and Characterization of a Prototype Stripline Beam Position Monitor for the CLIC Drive Beam”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA16, pp. 87-89.
[n] H. Witte and J. S. Berg, “Quadrupole Magnet for a Rapid Cycling Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3428-3430. doi:10.18429/JACoW-IPAC2015-WEPTY065
[n] H. Hattori et al., “Manufacturing Techniques of Full Scale Crab Cavities and a Simplified Co-Axial Coupler for KEKB”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP027, pp. 481-483.
[n] I. V. Khodak and V. A. Kushnir, “Performances of the Beam Generated by Metal-Dielectric Cathodes in RF Electron Guns”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT101, pp. 767-769.
[n] A. Dubrovskiy, “Towards Stable Acceleration in Linacs”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 65-67. doi:10.18429/JACoW-IPAC2014-MOPRO003
[n] Y. I. Kim et al., “Development of Electronics for the ATF2 Interaction Point Region Beam Position Monitor”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE035, pp. 1050-1052.
[n] S. Molloy et al., “Development of the C-Band BPM System for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP028, pp. 4009-4011.
[n] C. Maccani, “Simulated beam performance of the TWOCRYST proof of principle experiment at the LHC”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 631-634. doi:10.18429/JACoW-IPAC2025-MOPS019
[n] M. Schedler, F. Frommberger, P. Haenisch, W. Hillert, and C. Reinsch, “Broad and Narrow Band Feedback Systems at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI006, pp. 2714-2716.
[n] S. Mitsunobu et al., “Cryostat for TRISTAN Superconducting Cavity”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G29, pp. XX-XX.
[n] P. Kuske, R. G?Ârgen, J. Kuszynski, and P. O. Schmid, “Improvements of the Set-up and Procedures for Beam Energy Measurements at BESSY II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD083, pp. 891-893.
[n] L. Shang, W. Liu, Y. Lu, F. L. Shang, W. B. Song, and Z. B. Sun, “Status of the R&D for HALS Injection System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2335-2337. doi:10.18429/JACoW-IPAC2019-WEPMP015
[n] J. Chiba et al., “A Control System of the Joint-Project Accelerator Complex”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP002, pp. XX-XX.
[n] G. Tabacaru, J. Arje, and D. P. May, “The Light Ion Guide CB-ECRIS Project at the Texas A&M University Cyclotron Institute”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper WECO-B02, pp. 194-197.
[n] V. V. Kashikhin, N. Dhanaraj, M. J. Lamm, N. V. Mokhov, and V. S. Pronskikh, “Impact of Radiation on the Mu2e Production Solenoid Performance”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA14, pp. 1259-1261.
[n] H. J. Kim, M. O. Hyun, and B.-S. Park, “The Fabrication of Prototype Normal Conducting Rebuncher for the MEBT in RISP”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3000-3002. doi:10.18429/JACoW-IPAC2015-WEPMN033
[n] J. Miszczak, “CONTROL SYSTEM FOR THE WARSAW CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P11, pp. XX-XX.
[n] L. W. Funk et al., “52 MHz RF System of HERA”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1099-1102.
[n] Y. Yamamoto et al., “A New Cavity Diagnostic System for the Vertical Test of 1.3GHz Superconducting 9-Cell Cavities at KEK-STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP076, pp. 1002-1004.
[n] M. S. de Jong, P. J. P. Bunge, R. J. Burton, S. T. Craig, L. W. Funk, and R. M. Hutcheon, “Final Testing, Installation and Commissioing of the HERA 52 MHz”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 952-955.
[n] F. Carra et al., “The MultiMat Experiment at CERN HiRadMat Facility: Advanced Testing of Novel Materials and Instrumentation for HL-LHC Collimators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 76-79. doi:10.18429/JACoW-IPAC2017-MOPAB005
[n] J.-W. Kim, S. Hong, J. H. Kim, M. Kim, and J. Song, “DEVELOPMENT OF A TARGET SYSTEM FOR RARE ISOTOPE BEAM PRODUCTION WITH HIGH-POWER HEAVY-ION BEAMS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI040, pp. 3373-3375.
[n] A. Garonna, D. Abler, and C. Carli, “Proposal for a Slow Extraction System for a Biomedical Research Facility at CERN based on LEIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 833-835. doi:10.18429/JACoW-IPAC2014-MOPRI094
[n] R. M. Hutcheon, J. C. Brown, R. J. Burton, and R. A. Vokes, “A Simple Higher Order Mode Damping System for the PETRA II Cavities”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1546-1549.
[n] A. P. Sabersky, “Monitoring the Beams in SPEAR with Synchrotron Light”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 638-642.
[n] T. A. Puntambekar et al., “Experience of Beam Diagnostic Systems in Commissioning Stage of Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA065, pp. 413-415.
[n] G. S. Sedykh, V. G. Elkin, and E. V. Gorbachev, “Tango Web Access Modules and Web Clients for NICA Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 806-808. doi:10.18429/JACoW-ICALEPCS2017-TUPHA167
[n] P. Sha et al., “Research and Development of 650 MHz Cavities for CEPC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 616. doi:10.18429/JACoW-SRF2021-WEPCAV012
For LaTeX
Use Complete Form
For BibTeX
References
- A. Goetz et al., “Simulation Methods for Transverse Beam Size Measurements Using the Heterodyne Near Field Speckles of Hard X-rays”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 272-275.
- B. Bolzon, S. Bai, P. Bambade, A. Jeremie, and G. R. White, “Linear Collider Test Facility: Twiss Parameter Analysis at the IP/Post-IP location of the ATF2 beam line”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD077, pp. 4458-4460.
- M. E. Saleski and E. Carrone, “Configuration Management Plan for Interlock Safety Systems at the Linac Coherent Light Source (LCLS)”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP106, pp. XX-XX.
- D. Douglas et al., “Architectural Considerations for Recirculated and Energy-Recovered Hard XFEL Drivers”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4560-4563.
- F. Collamati, M. Boscolo, H. Burkhardt, and R. Kersevan, “Synchrotron Radiation Backgrounds for the FCC-hh Experiments”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2031-2034.
- J. F. Schmidt, W. Hillert, M. Schedler, and J.-P. Thiry, “Measurement of Momentum Compaction Factor via Depolarizing Resonances at ELSA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 811-813.
- T. Lef?¿vre, “The CLIC Test Facility 3 Instrumentation”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper WEIOTIO02, pp. 323-331.
- A. S. Fisher, A. Goldblatt, and T. Lef?¿vre, “The LHC Synchrotron-Light Monitors”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB03, pp. 164-166.
- V. D. Burlakov et al., “Status of the Construction of the INR Meson Factory”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOA0002, pp. 9-13.
- V. F. Khan and R. M. Jones, “Wake-field Suppression in the CLIC Main Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP089, pp. 2725-2727.
- R. B. Palmer et al., “Higher Luminosity eRHIC Ring-Ring Options and Upgrade”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2472-2474.
- O. Pinazza et al., “How Low-Cost Devices Can Help on the Way to ALICE Upgrade”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 114-117.
- U. Happek, M. James, K. Jordan, G. A. Krafft, P. Piot, and J. Song, “Measuring and Characterizing Ultrashort Bunches in the Jefferson Lab Free-Electron Laser”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP24G, pp. 1580-1582.
- S. Mitsunobu et al., “Activities of Superconducting Cavity for KEK B-Factory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93J05, pp. XX-XX.
- Yu. Zuev et al., “A 5 to 20 MeV Electron Linear Accelerator for Metrology”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 103-105.
- Y. Yamamoto et al., “Recent Results of the Vertical Test for 1.3GHz Superconducting 9-Cell Cavities at KEK-STF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP074, pp. 996-998.
- G. Ambrosio, G. Bellomo, and L. Rossi, “A 300 T/m NbSn Quadrupole for the Low-beta Insertions of the LHC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP088G, pp. 2290-2292.
- P. Emma, G. Annala, and B. Hendricks, “Fermilab's Automated Accelerator Start-Up Program”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1940-1943.
- S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149.
- A. Benot-Morell et al., “Design and Characterization of a Prototype Stripline Beam Position Monitor for the CLIC Drive Beam”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA16, pp. 87-89.
- H. Witte and J. S. Berg, “Quadrupole Magnet for a Rapid Cycling Synchrotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3428-3430.
- H. Hattori et al., “Manufacturing Techniques of Full Scale Crab Cavities and a Simplified Co-Axial Coupler for KEKB”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP027, pp. 481-483.
- I. V. Khodak and V. A. Kushnir, “Performances of the Beam Generated by Metal-Dielectric Cathodes in RF Electron Guns”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT101, pp. 767-769.
- A. Dubrovskiy, “Towards Stable Acceleration in Linacs”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 65-67.
- Y. I. Kim et al., “Development of Electronics for the ATF2 Interaction Point Region Beam Position Monitor”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE035, pp. 1050-1052.
- S. Molloy et al., “Development of the C-Band BPM System for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP028, pp. 4009-4011.
- C. Maccani, “Simulated beam performance of the TWOCRYST proof of principle experiment at the LHC”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS019, pp. 631-634.
- M. Schedler, F. Frommberger, P. Haenisch, W. Hillert, and C. Reinsch, “Broad and Narrow Band Feedback Systems at ELSA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI006, pp. 2714-2716.
- S. Mitsunobu et al., “Cryostat for TRISTAN Superconducting Cavity”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G29, pp. XX-XX.
- P. Kuske, R. G?Ârgen, J. Kuszynski, and P. O. Schmid, “Improvements of the Set-up and Procedures for Beam Energy Measurements at BESSY II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD083, pp. 891-893.
- L. Shang, W. Liu, Y. Lu, F. L. Shang, W. B. Song, and Z. B. Sun, “Status of the R&D for HALS Injection System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2335-2337.
- J. Chiba et al., “A Control System of the Joint-Project Accelerator Complex”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP002, pp. XX-XX.
- G. Tabacaru, J. Arje, and D. P. May, “The Light Ion Guide CB-ECRIS Project at the Texas A&M University Cyclotron Institute”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper WECO-B02, pp. 194-197.
- V. V. Kashikhin, N. Dhanaraj, M. J. Lamm, N. V. Mokhov, and V. S. Pronskikh, “Impact of Radiation on the Mu2e Production Solenoid Performance”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA14, pp. 1259-1261.
- H. J. Kim, M. O. Hyun, and B.-S. Park, “The Fabrication of Prototype Normal Conducting Rebuncher for the MEBT in RISP”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3000-3002.
- J. Miszczak, “CONTROL SYSTEM FOR THE WARSAW CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P11, pp. XX-XX.
- L. W. Funk et al., “52 MHz RF System of HERA”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1099-1102.
- Y. Yamamoto et al., “A New Cavity Diagnostic System for the Vertical Test of 1.3GHz Superconducting 9-Cell Cavities at KEK-STF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP076, pp. 1002-1004.
- M. S. de Jong, P. J. P. Bunge, R. J. Burton, S. T. Craig, L. W. Funk, and R. M. Hutcheon, “Final Testing, Installation and Commissioing of the HERA 52 MHz”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 952-955.
- F. Carra et al., “The MultiMat Experiment at CERN HiRadMat Facility: Advanced Testing of Novel Materials and Instrumentation for HL-LHC Collimators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 76-79.
- J.-W. Kim, S. Hong, J. H. Kim, M. Kim, and J. Song, “DEVELOPMENT OF A TARGET SYSTEM FOR RARE ISOTOPE BEAM PRODUCTION WITH HIGH-POWER HEAVY-ION BEAMS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI040, pp. 3373-3375.
- A. Garonna, D. Abler, and C. Carli, “Proposal for a Slow Extraction System for a Biomedical Research Facility at CERN based on LEIR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 833-835.
- R. M. Hutcheon, J. C. Brown, R. J. Burton, and R. A. Vokes, “A Simple Higher Order Mode Damping System for the PETRA II Cavities”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1546-1549.
- A. P. Sabersky, “Monitoring the Beams in SPEAR with Synchrotron Light”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 638-642.
- T. A. Puntambekar et al., “Experience of Beam Diagnostic Systems in Commissioning Stage of Indus-2”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA065, pp. 413-415.
- G. S. Sedykh, V. G. Elkin, and E. V. Gorbachev, “Tango Web Access Modules and Web Clients for NICA Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 806-808.
- P. Sha et al., “Research and Development of 650 MHz Cavities for CEPC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 616.
Back to search