Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. H. Bai, W. Li, L. Wang, P. H. Yang, and Z. H. Yang, “Design of the Second Version of the HALS Storage Ring Lattice”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4601-4604. doi:10.18429/JACoW-IPAC2018-THPMK121
[n] M. Anerella et al., “Superconducting Magnets for use inside the HERA ep Interaction Regions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUOA02A, pp. 308-310.
[n] P. H. Nallin, G. R. S. Franco, R. C. Ito, and A. R. D. Rodrigues, “Exploring Embedded Systems' Dedicated Cores for Real-Time Applications”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1037. doi:10.18429/JACoW-ICALEPCS2019-WEMPR003
[n] G. M. Kazakevich, R. P. Johnson, B. Chase, R. J. Pasquinelli, and V. P. Yakovlev, “Modeling of Magnetron Transmitter for the Project X CW 1 GEV Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO15, pp. 966-968.
[n] S. Fukuda et al., “Compensation of Initial Beam Loading for Electron Linacs”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5A07, pp. 2462-2464.
[n] M. Benedikt et al., “Injection Matching Studies Using Turn-By-Turn Beam Profile Measurements in the CERN PS”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM11, pp. XX-XX.
[n] J. M. Schippers and H. H. Kiewiet, “A Beam Profile Monitor Using the Ionization of Residual Gas”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXD-03, pp. 477-478.
[n] S. Udrea et al., “Preparatory Work for a Fluorescence Based Profile Monitor for an Electron Lens”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 528-531. doi:10.18429/JACoW-IBIC2016-TUPG73
[n] Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
[n] G. B. Christian et al., “An FPGA-based Turn-by-Turn Beam Position Monitoring System for Studying Multiple Bunch Beams in the ATF Damping Ring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD79, pp. 230-232.
[n] A. Novokhatski, “Numerical Study of RF-Focusing Using Fokker-Plank Equation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS078, pp. 4228-4230.
[n] F. Antoniotti et al., “Quality Management of CERN Vacuum Controls”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC027, pp. 608-611.
[n] G. Feng, W. Fan, W. W. Gao, W. Li, L. Wang, and S. C. Zhang, “Conceptual Design of Injection System for Hefei Light Source (HLS) Upgrade Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC030, pp. 1785-1787.
[n] A. D. Wu et al., “Design of a Medium Beta Half-Wave SC Prototype Cavity at IMP”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB015, pp. 1097-1099.
[n] A. Wagner, “International Collaboration with High Energy Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOXAMH01, pp. XX-XX.
[n] Z. Wang, C. H. Li, H. Qu, and H. Wang, “Vibration Study of Magnet Girder of the HEPS-TF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4554-4556. doi:10.18429/JACoW-IPAC2017-THPVA051
[n] J. Li et al., “RF Design and Processing of a Power Coupler for Third Harmonic Superconducting Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN100, pp. 2265-2267.
[n] S. R. Norum et al., “The Machine Protection System for the Linac Coherent Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP039, pp. 4856-4858.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. H. Bai, W. Li, L. Wang, P. H. Yang, and Z. H. Yang, “Design of the Second Version of the HALS Storage Ring Lattice”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4601-4604.
- M. Anerella et al., “Superconducting Magnets for use inside the HERA ep Interaction Regions”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUOA02A, pp. 308-310.
- P. H. Nallin, G. R. S. Franco, R. C. Ito, and A. R. D. Rodrigues, “Exploring Embedded Systems' Dedicated Cores for Real-Time Applications”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1037.
- G. M. Kazakevich, R. P. Johnson, B. Chase, R. J. Pasquinelli, and V. P. Yakovlev, “Modeling of Magnetron Transmitter for the Project X CW 1 GEV Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO15, pp. 966-968.
- S. Fukuda et al., “Compensation of Initial Beam Loading for Electron Linacs”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP5A07, pp. 2462-2464.
- M. Benedikt et al., “Injection Matching Studies Using Turn-By-Turn Beam Profile Measurements in the CERN PS”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM11, pp. XX-XX.
- J. M. Schippers and H. H. Kiewiet, “A Beam Profile Monitor Using the Ionization of Residual Gas”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXD-03, pp. 477-478.
- S. Udrea et al., “Preparatory Work for a Fluorescence Based Profile Monitor for an Electron Lens”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 528-531.
- Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
- G. B. Christian et al., “An FPGA-based Turn-by-Turn Beam Position Monitoring System for Studying Multiple Bunch Beams in the ATF Damping Ring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD79, pp. 230-232.
- A. Novokhatski, “Numerical Study of RF-Focusing Using Fokker-Plank Equation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS078, pp. 4228-4230.
- F. Antoniotti et al., “Quality Management of CERN Vacuum Controls”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC027, pp. 608-611.
- G. Feng, W. Fan, W. W. Gao, W. Li, L. Wang, and S. C. Zhang, “Conceptual Design of Injection System for Hefei Light Source (HLS) Upgrade Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC030, pp. 1785-1787.
- A. D. Wu et al., “Design of a Medium Beta Half-Wave SC Prototype Cavity at IMP”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB015, pp. 1097-1099.
- A. Wagner, “International Collaboration with High Energy Accelerators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOXAMH01, pp. XX-XX.
- Z. Wang, C. H. Li, H. Qu, and H. Wang, “Vibration Study of Magnet Girder of the HEPS-TF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4554-4556.
- J. Li et al., “RF Design and Processing of a Power Coupler for Third Harmonic Superconducting Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN100, pp. 2265-2267.
- S. R. Norum et al., “The Machine Protection System for the Linac Coherent Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP039, pp. 4856-4858.
Back to search