Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. C. Yoon, H. J. Park, J. Choi, and S. H. Nam, “EPICS Based New RF Control System for PAL Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99907, pp. XX-XX.
[n] S. Nakamura, “Commissioning of the Phase 2 and Phase 3 SuperKEKB / B-Factory”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 14-17. doi:10.18429/JACoW-NAPAC2019-MOYBA2
[n] F. Lin et al., “Storage-ring Electron Cooler for Relativistic Ion Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2466-2468. doi:10.18429/JACoW-IPAC2016-WEPMW020
[n] A. Kaftoosian and P. J. Gonzalez, “2 kW Balanced Amplifier Module for a 30 kW Solid-State Pulsed RF Power Amplifier at 352 MHz”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2279-2281. doi:10.18429/JACoW-IPAC2014-WEPME011
[n] D. G. Kim, J. Y. Kim, J.-W. Kim, M. Kim, C. C. Yun, and A. Zaghloul, “Magnet Designs of the In-flight Fragment Separator for the RISP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME024, pp. 3555-3557.
[n] W. F. Praeg, “Dual Frequency Ring Magnet Power Supply with Flat-Bottom”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2873-2876.
[n] Y. W. Kang et al., “Design and High Power Processing of RFQ Input Power Couplers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS074, pp. 2505-2507.
[n] Y. Shimosaki et al., “Optimization of Lower Emittance Optics for the SPring-8 Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC013, pp. 1182-1184.
[n] N. Biancacci, E. M?®tral, B. Salvant, M. Migliorati, L. Palumbo, and V. G. Vaccaro, “The Mode Matching Method Applied to Beam Coupling Impedance Calculations of Finite Length Devices”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR062, pp. 3069-3071.
[n] J. Wilgen and S. M. Meykopff, “A Unified Matlab API for TINE and DOOCS Control Systems at DESY”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO010, pp. 55-56.
[n] Y. Okayasu, S. Matsubara, H. Tomizawa, T. Matsukawa, H. Minamide, and K. Ogawa, “Progress Report of the Spectral Decoding Based EOS with Organic Pockels EO Crystals”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC35, pp. 765-768.
[n] K. Brackebusch, H.-W. Glock, and U. van Rienen, “Calculation of High Frequency Fields in Resonant Cavities Based on Perturbation Theory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC096, pp. 2235-2237.
[n] K. Hatanaka et al., “Design of HTS Sector Magnets for the RCNP New Injector Cyclotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO028, pp. 2460-2462.
[n] D. C. Plostinar et al., “Studies of Ultimate Intensity Limits for High Power Proton Linacs”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 951-954. doi:10.18429/JACoW-IPAC2016-MOPOY047
[n] M.-E. Couprie, “Possibilities for Future Synchrotron Radiation Sources”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 1000-1006. doi:10.18429/JACoW-NAPAC2019-FRCHC2
[n] D. G. Kim, H.-C. Bhang, and J.-W. Kim, “Beam Emittance Measurement in the Injection Beam Line for a Cyclotron Accelerator Mass Spectrometer”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS045, pp. 3523-3525.
[n] K. Oide et al., “Progress in the Design of Beam Optics for FCC-ee Collider Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1281-1284. doi:10.18429/JACoW-IPAC2017-TUOCB1
For LaTeX
Use Complete Form
For BibTeX
References
- J. C. Yoon, H. J. Park, J. Choi, and S. H. Nam, “EPICS Based New RF Control System for PAL Storage Ring”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99907, pp. XX-XX.
- S. Nakamura, “Commissioning of the Phase 2 and Phase 3 SuperKEKB / B-Factory”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 14-17.
- F. Lin et al., “Storage-ring Electron Cooler for Relativistic Ion Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2466-2468.
- A. Kaftoosian and P. J. Gonzalez, “2 kW Balanced Amplifier Module for a 30 kW Solid-State Pulsed RF Power Amplifier at 352 MHz”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2279-2281.
- D. G. Kim, J. Y. Kim, J.-W. Kim, M. Kim, C. C. Yun, and A. Zaghloul, “Magnet Designs of the In-flight Fragment Separator for the RISP”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME024, pp. 3555-3557.
- W. F. Praeg, “Dual Frequency Ring Magnet Power Supply with Flat-Bottom”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2873-2876.
- Y. W. Kang et al., “Design and High Power Processing of RFQ Input Power Couplers”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS074, pp. 2505-2507.
- Y. Shimosaki et al., “Optimization of Lower Emittance Optics for the SPring-8 Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC013, pp. 1182-1184.
- N. Biancacci, E. M?®tral, B. Salvant, M. Migliorati, L. Palumbo, and V. G. Vaccaro, “The Mode Matching Method Applied to Beam Coupling Impedance Calculations of Finite Length Devices”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR062, pp. 3069-3071.
- J. Wilgen and S. M. Meykopff, “A Unified Matlab API for TINE and DOOCS Control Systems at DESY”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO010, pp. 55-56.
- Y. Okayasu, S. Matsubara, H. Tomizawa, T. Matsukawa, H. Minamide, and K. Ogawa, “Progress Report of the Spectral Decoding Based EOS with Organic Pockels EO Crystals”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC35, pp. 765-768.
- K. Brackebusch, H.-W. Glock, and U. van Rienen, “Calculation of High Frequency Fields in Resonant Cavities Based on Perturbation Theory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC096, pp. 2235-2237.
- K. Hatanaka et al., “Design of HTS Sector Magnets for the RCNP New Injector Cyclotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO028, pp. 2460-2462.
- D. C. Plostinar et al., “Studies of Ultimate Intensity Limits for High Power Proton Linacs”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 951-954.
- M.-E. Couprie, “Possibilities for Future Synchrotron Radiation Sources”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 1000-1006.
- D. G. Kim, H.-C. Bhang, and J.-W. Kim, “Beam Emittance Measurement in the Injection Beam Line for a Cyclotron Accelerator Mass Spectrometer”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS045, pp. 3523-3525.
- K. Oide et al., “Progress in the Design of Beam Optics for FCC-ee Collider Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1281-1284.
Back to search