Favourites
For Word
[n] C. H. Boulware, T. L. Grimm, S. A. Belomestnykh, and I. Ben-Zvi, “Tunable 28 MHz Superconducting Cavity for RHIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC083, pp. 2405-2407.
[n] M. Y. Huang, L. Huang, N. Huang, J. Qiu, S. Wang, and S. Y. Xu, “Study on the transverse painting during the injection process for CSNS/RCS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2025-2027. doi:10.18429/JACoW-IPAC2015-TUPTY015
[n] N. S. Dikansky and D. V. Pestrikov, “Collisional Heating of Beams in Strong Focusing Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WEC0004, pp. 253-255.
[n] M. Hu et al., “Beam Profile Measurement with Flying Wires at the Fermilab Recycler Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT031, pp. 2182-2184.
[n] H. C. Fernandes et al., “Ultra-high Vacuum Seal for Long Chambers using Wire Seals”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC09, pp. 1157-1159.
[n] T. Hoffmann and H. Br?ñuning, “REMBRANDT - REMote Beam instRumentation And Network Diagnosis Tool”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC006, pp. 1103-1106.
[n] A. N. Aleshaev, I. V. Belousov, I. E. Borunov, R. G. Gromov, K. V. Gubin, and A. A. Nikiforov, “Forinjector VEPP-5 Klystron Gallery Control System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP41, pp. 750-752.
[n] V. S. Dyubkov and S. Korenev, “Physical Model of Partial RF Discharge in Isochronous Cyclotrons”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 323-325. doi:10.18429/JACoW-IPAC2015-MOPJE022
[n] A. V. Butenko et al., “Development of NICA Injection Complex”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2103-2105. doi:10.18429/JACoW-IPAC2014-WEPRO067
[n] J. L. Martinez Marin et al., “Reinforcement Learning and Bayesian Optimization for Ion Linac Operations”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 130-135. doi:10.18429/JACoW-HIAT2022-TH1I2
[n] C.-Y. Liu, Y.-C. Chien, and H. M. Shih, “Performance Evaluation of the Switching Mode AC Power Supply”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP125, pp. 3652-3654.
[n] A. V. Voronkov, E. S. Masunov, and S. M. Polozov, “Neutralized Ion Beam Dynamics Study in UNDULAC-E”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA011, pp. 1345-1347.
[n] A. D, A. Grudiev, V. F. Khan, W. Wuensch, T. Higo, and R. M. Jones, “Enhanced Coupling Design of a Detuned Damped Structure for CLIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC022, pp. 3323-3325.
[n] C. H. Kuo, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and C.-Y. Liao, “Operation Status of Bunch-by-bunch Feedback System in the TLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO015, pp. 514-516.
[n] C. L. Chen et al., “Development of an IGBT Pulser for TPS LTB Kicker”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3191-3193. doi:10.18429/JACoW-IPAC2015-WEPHA035
[n] H. Takahashi, T. Kojima, S. Maebara, T. Narita, H. Sakaki, and K. Tsutsumi, “Present Status of MPS and TS for IFMIF/EVEDA Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB006, pp. 2695-2697.
[n] F.-J. Boergermann, “Improvements in Production of Magnets and Pole Pieces for Undulators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1415-1417. doi:10.18429/JACoW-IPAC2017-TUPAB041
[n] P. Sanchez et al., “The ALBA RF Amplifier System Based on Inductive Output Tubes (IOT)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD033, pp. 523-525.
[n] M. Fan et al., “Correctiion Magnets for the Superconducting Supercollider”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1675-1678.
[n] O. A. Anderson et al., “The CCVV High-Current Megavolt-Range DC Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1117-1120.
[n] N. Wang, M. Y. Huang, N. Huang, and S. Wang, “Feasibility Studies of the Foil Scattering Extraction in CSNS/RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS042, pp. 3517-3519.
[n] V. A. Andreev et al., “Progress Work on High-current Heavy Ion Linac for ITEP TWAC Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD052, pp. 801-803.
[n] R. Modic, P. Della Faille, P. Mekuc, and D. Vandeplassche, “MYRRHA DAQ Development”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2645-2646. doi:10.18429/JACoW-IPAC2019-WEPGW074
For LaTeX
Use Complete Form
For BibTeX
References
- C. H. Boulware, T. L. Grimm, S. A. Belomestnykh, and I. Ben-Zvi, “Tunable 28 MHz Superconducting Cavity for RHIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC083, pp. 2405-2407.
- M. Y. Huang, L. Huang, N. Huang, J. Qiu, S. Wang, and S. Y. Xu, “Study on the transverse painting during the injection process for CSNS/RCS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2025-2027.
- N. S. Dikansky and D. V. Pestrikov, “Collisional Heating of Beams in Strong Focusing Accelerators”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WEC0004, pp. 253-255.
- M. Hu et al., “Beam Profile Measurement with Flying Wires at the Fermilab Recycler Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT031, pp. 2182-2184.
- H. C. Fernandes et al., “Ultra-high Vacuum Seal for Long Chambers using Wire Seals”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC09, pp. 1157-1159.
- T. Hoffmann and H. Br?ñuning, “REMBRANDT - REMote Beam instRumentation And Network Diagnosis Tool”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC006, pp. 1103-1106.
- A. N. Aleshaev, I. V. Belousov, I. E. Borunov, R. G. Gromov, K. V. Gubin, and A. A. Nikiforov, “Forinjector VEPP-5 Klystron Gallery Control System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP41, pp. 750-752.
- V. S. Dyubkov and S. Korenev, “Physical Model of Partial RF Discharge in Isochronous Cyclotrons”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 323-325.
- A. V. Butenko et al., “Development of NICA Injection Complex”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2103-2105.
- J. L. Martinez Marin et al., “Reinforcement Learning and Bayesian Optimization for Ion Linac Operations”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 130-135.
- C.-Y. Liu, Y.-C. Chien, and H. M. Shih, “Performance Evaluation of the Switching Mode AC Power Supply”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP125, pp. 3652-3654.
- A. V. Voronkov, E. S. Masunov, and S. M. Polozov, “Neutralized Ion Beam Dynamics Study in UNDULAC-E”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA011, pp. 1345-1347.
- A. D, A. Grudiev, V. F. Khan, W. Wuensch, T. Higo, and R. M. Jones, “Enhanced Coupling Design of a Detuned Damped Structure for CLIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC022, pp. 3323-3325.
- C. H. Kuo, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and C.-Y. Liao, “Operation Status of Bunch-by-bunch Feedback System in the TLS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO015, pp. 514-516.
- C. L. Chen et al., “Development of an IGBT Pulser for TPS LTB Kicker”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3191-3193.
- H. Takahashi, T. Kojima, S. Maebara, T. Narita, H. Sakaki, and K. Tsutsumi, “Present Status of MPS and TS for IFMIF/EVEDA Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB006, pp. 2695-2697.
- F.-J. Boergermann, “Improvements in Production of Magnets and Pole Pieces for Undulators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1415-1417.
- P. Sanchez et al., “The ALBA RF Amplifier System Based on Inductive Output Tubes (IOT)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD033, pp. 523-525.
- M. Fan et al., “Correctiion Magnets for the Superconducting Supercollider”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1675-1678.
- O. A. Anderson et al., “The CCVV High-Current Megavolt-Range DC Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1117-1120.
- N. Wang, M. Y. Huang, N. Huang, and S. Wang, “Feasibility Studies of the Foil Scattering Extraction in CSNS/RCS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS042, pp. 3517-3519.
- V. A. Andreev et al., “Progress Work on High-current Heavy Ion Linac for ITEP TWAC Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD052, pp. 801-803.
- R. Modic, P. Della Faille, P. Mekuc, and D. Vandeplassche, “MYRRHA DAQ Development”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2645-2646.
Back to search