Favourites
For Word
[n] F. Furuta, T. Konomi, and K. Saito, “High Gradient Behaviors of Large Grain ICHIRO Single Cell Cavity by Chemical Polishing”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE004, pp. 3344-3346.
[n] A. R. Gamelin, C. Bruni, V. Chaumat, D. Le Guidec, P. Lepercq, and R. Marie, “Impedance Simulations and Measurements for ThomX Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 586-588. doi:10.18429/JACoW-IPAC2016-MOPOR002
[n] Y. Lu, C. Feng, and Q. Zhang, “An accumulator ring lattice design for swap-out injection scheme”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPG09, unpublished.
[n] V. Sajaev, “Evaluation of Power Supply and Alignment Tolerances for the Advanced Photons Source Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 556-558. doi:10.18429/JACoW-IPAC2015-MOPMA011
[n] A. V. Fedotov, “IBS and Possible Luminosity Improvement for RHIC Operation below Transition Energy”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP005, pp. 2486-2488.
[n] G. De Rijk, H. Piekarz, and L. Rossi, “Preliminary Study of Using quot;Pipetronquot;-type Magnets for a Pre-accelerator for the LHC Collider”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS005, pp. 1493-1495.
[n] J. Rosenzweig, S. Hartman, and J. Stevens, “RF Focusing Effects and Multi-Bunch Beam Breakup in Superconducting Linear Colliders”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3357-3360.
[n] M. R. Hadmack and E. B. Szarmes, “Scanning Wire Beam Position Monitor for Alignment of a High Brightness Inverse-Compton X-ray Source”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF21, pp. 856-859.
[n] A. Bertarelli et al., “Permanent Deformation of the LHC Collimator Jaws Induced by Shock Beam Impact: an Analytical and Numerical Interpretation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS127, pp. 1801-1803.
[n] H. G. Kirk et al., “A Solenoid Capture System for a Muon Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP265, pp. 1316-1318.
[n] S. Varnasseri et al., “Design of Stripline Beam Position Monitors for the ESS MEBT”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 620-622. doi:10.18429/JACoW-IBIC2016-WEPG05
[n] C. Benvenuti, D. Bloess, E. Chiaveri, N. Hilleret, M. Minestrini, and W. Weingarten, “Superconducting Cavities Produced by Magnetron Sputtering”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E01, pp. 445-468.
[n] O. Kugeler, J. Knobloch, J. M. Vogt, and S. Aull, “Impact of Trapped Flux and Thermal Gradients on the SRF Cavity Quality Factor”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC002, pp. 2203-2205.
[n] T. Ohkawa, H. Ao, K. Hasegawa, M. Ikegami, H. Sako, and A. Ueno, “Comparison of Trajectory Between Modeling and Experiment for J-PARC Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN043, pp. 3324-3326.
[n] V. Volkov and V. M. Petrov, “Numerical Estimation of Beam Break-Up Instability in TESLA Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1178-1181. doi:10.18429/JACoW-SRF2019-THP104
[n] S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Study of I-V Characteristics at Different Locations Inside a Demountable Nb SRF Cavity During Vertical BEP and EP Treatments”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO033, pp. 450-455.
[n] A. Shishlo, P. Chu, J. Galambos, and T. A. Pelaia, “The EPICS Based Virtual Accelerator - Concept and Implementation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE017, pp. 2366-2368.
[n] M. Youwu, B. Liu, and Z. Zhang, “Hybrid Undulator Design and Field Error Analysis”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1377-1380.
[n] Y. Yuri et al., “Simulation Study on Transverse Laser Cooling and Crystallization of Heavy-Ion Beams at the Cooler Storage Ring S-LSR”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THAM1HA03, pp. 162-165.
[n] J. S. Berg, “Optimizing the Design of Linear Non-scaling Fixed Field Alternating Gradient Arcs for the Electron Rings of eRHIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2475-2478. doi:10.18429/JACoW-IPAC2016-WEPMW025
[n] J. Barranco, T. Pieloni, C. Tambasco, X. Buffat, and S. V. Furuseth, “Beam-Beam Studies for FCC-hh”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2109-2112. doi:10.18429/JACoW-IPAC2017-TUPVA026
For LaTeX
Use Complete Form
For BibTeX
References
- F. Furuta, T. Konomi, and K. Saito, “High Gradient Behaviors of Large Grain ICHIRO Single Cell Cavity by Chemical Polishing”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE004, pp. 3344-3346.
- A. R. Gamelin, C. Bruni, V. Chaumat, D. Le Guidec, P. Lepercq, and R. Marie, “Impedance Simulations and Measurements for ThomX Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 586-588.
- Y. Lu, C. Feng, and Q. Zhang, “An accumulator ring lattice design for swap-out injection scheme”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG09, unpublished.
- V. Sajaev, “Evaluation of Power Supply and Alignment Tolerances for the Advanced Photons Source Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 556-558.
- A. V. Fedotov, “IBS and Possible Luminosity Improvement for RHIC Operation below Transition Energy”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP005, pp. 2486-2488.
- G. De Rijk, H. Piekarz, and L. Rossi, “Preliminary Study of Using quot;Pipetronquot;-type Magnets for a Pre-accelerator for the LHC Collider”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS005, pp. 1493-1495.
- J. Rosenzweig, S. Hartman, and J. Stevens, “RF Focusing Effects and Multi-Bunch Beam Breakup in Superconducting Linear Colliders”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3357-3360.
- M. R. Hadmack and E. B. Szarmes, “Scanning Wire Beam Position Monitor for Alignment of a High Brightness Inverse-Compton X-ray Source”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF21, pp. 856-859.
- A. Bertarelli et al., “Permanent Deformation of the LHC Collimator Jaws Induced by Shock Beam Impact: an Analytical and Numerical Interpretation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS127, pp. 1801-1803.
- H. G. Kirk et al., “A Solenoid Capture System for a Muon Collider”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP265, pp. 1316-1318.
- S. Varnasseri et al., “Design of Stripline Beam Position Monitors for the ESS MEBT”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 620-622.
- C. Benvenuti, D. Bloess, E. Chiaveri, N. Hilleret, M. Minestrini, and W. Weingarten, “Superconducting Cavities Produced by Magnetron Sputtering”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87E01, pp. 445-468.
- O. Kugeler, J. Knobloch, J. M. Vogt, and S. Aull, “Impact of Trapped Flux and Thermal Gradients on the SRF Cavity Quality Factor”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC002, pp. 2203-2205.
- T. Ohkawa, H. Ao, K. Hasegawa, M. Ikegami, H. Sako, and A. Ueno, “Comparison of Trajectory Between Modeling and Experiment for J-PARC Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN043, pp. 3324-3326.
- V. Volkov and V. M. Petrov, “Numerical Estimation of Beam Break-Up Instability in TESLA Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1178-1181.
- S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Study of I-V Characteristics at Different Locations Inside a Demountable Nb SRF Cavity During Vertical BEP and EP Treatments”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO033, pp. 450-455.
- A. Shishlo, P. Chu, J. Galambos, and T. A. Pelaia, “The EPICS Based Virtual Accelerator - Concept and Implementation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE017, pp. 2366-2368.
- M. Youwu, B. Liu, and Z. Zhang, “Hybrid Undulator Design and Field Error Analysis”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1377-1380.
- Y. Yuri et al., “Simulation Study on Transverse Laser Cooling and Crystallization of Heavy-Ion Beams at the Cooler Storage Ring S-LSR”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper THAM1HA03, pp. 162-165.
- J. S. Berg, “Optimizing the Design of Linear Non-scaling Fixed Field Alternating Gradient Arcs for the Electron Rings of eRHIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2475-2478.
- J. Barranco, T. Pieloni, C. Tambasco, X. Buffat, and S. V. Furuseth, “Beam-Beam Studies for FCC-hh”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2109-2112.
Back to search