JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. H. Boulware, T. L. Grimm, R. Hipple, S. M. Lund, and V. S. Morozov, “Double-Bend Achromat Beamline for Injection Into a High-Power Superconducting Electron Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 494-496. doi:10.18429/JACoW-NAPAC2019-TUPLH03
[n]	Y. Yan et al., “Developing Criteria for Laser Transverse Instability in LWFA Simulations”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 855-857. doi:10.18429/JACoW-NAPAC2019-WEPLO05
[n]	A. Hanuka, “Accurate and Confident Prediction of Electron Beam Longitudinal Properties Using Spectral Virtual Diagnostics”, presented at the IPAC'22, Bangkok, Thailand, Jun. 2022, paper TUIXGD1, unpublished. 
[n]	E. Cullerton, T. A. Butler, and V. Tupikov, “Proposed LLRF Improvements for Fermilab 201.25 MHz Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP058, pp. 713-715. 
[n]	C. S. Narug et al., “Design Status of BCC Cryomodule for LCLS-II HE”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 263-266. doi:10.18429/JACoW-SRF2023-MOPMB065
[n]	D. Mirarchi et al., “Operational handling of Crystal collimation at the LHC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 559-562. doi:10.18429/JACoW-IPAC2023-MOPL022
[n]	G. Arnolds, H. Heinrichs, R. Mayer, N. Minatti, H. Piel, and W. Weingarten, “Design and Status of an Experimental Superconducting Linear Accelerator for Electrons”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3775-3778. 
[n]	H. J. Moe, J. H. Vacca, V. R. Veluri, and M. White, “Radiation Measurements at the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA07, pp. 1064-1066. 
[n]	A. Khaleghi, M. Akbari, H. H. Haedar, and K. Mahmoudi, “Key Factors and Drivers for Utilizing Machine Learning in Experimental Data Analysis: A Case Study of Synchrotron Experimental Data”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper WEP044, unpublished. 
[n]	C. Reece and R. Sundelin, “Simulation of Multiturn Transverse Instabilities in Electron Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2350-2353. 
[n]	J. A. MacLachlan, “Correcting Closed-Orbit Distortion in the NAL Main Ring”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 892-895. 
[n]	M. Guijarro et al., “Beamline Experiments at ESRF with BLISS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 70. doi:10.18429/JACoW-ICALEPCS2019-MOCPL03
[n]	J. E. Griffin, C. Ankenbrandt, J. A. MacLachlan, and A. Moretti, “Isolated Bucket RF Systems in the Fermilab Antiproton Facility”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3502-3505. 
[n]	C. Wang, Q. Chu, T. Tan, D. Luo, and P. Xiong, “Study on the laser treatment of NB and Nb3Sn thin films on copper substrate with a kW nanosecond fiber laser”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4384-4385. doi:10.18429/JACoW-IPAC2023-THPA178
[n]	E. R. Moog et al., “A Phase Shifter for Inline Undulators at the Advanced Photon Source Upgrade Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3830-3833. doi:10.18429/JACoW-IPAC2021-THPAB040
[n]	G. Westenskow, G. Caporaso, Y. Chen, T. Houck, and S. Sampayan, “Double Pulse Experiment with a Velvet Cathode on the ATA Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC16, pp. 1027-1029. 
[n]	D. Luo et al., “Analysis of High Field Q-Slope (HFQS) Causes and Development of New Chemical Polishing Acid”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 699-702. doi:10.18429/JACoW-NAPAC2019-WEPLM47
[n]	M. C. Rocha et al., “High Rigidity Girder System for the Sirius Machine”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 261-263. doi:10.18429/JACoW-MEDSI2018-WEPH26
[n]	R. Lorenz, I. Reyzl, and S. Sabah, “Study of Orbit Feedback Systems for the TESLA Linear Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P066, pp. 2392-2394. 
[n]	L. Rybarcyk and R. Garnett, “A Linac-to-Booster Injection Line for Transverse Matching and Correlated Injection Painting”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP07, pp. 303-305. 
[n]	C. C. Paulson et al., “Accelerator Systems Optimizing Code”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR20, pp. 1164-1166. 
[n]	B. A. Shadwick and J. S. Wurtele, “Numerical Studies of Wake Excitation in Plasma Channels”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP21H, pp. 827-829. 
[n]	V. Morozov et al., “Development of FFA RLA design concept”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPC42, unpublished. 
[n]	R. C. Trendler, “Operation Experience with the Fermilab 150 GeV Injection Kicker”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3012-3015. 
[n]	A. Roth et al., “Energy Reduction of VarianÔÇÖs ProBeam 250 MeV Cyclotron to 226 MeV”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 344-347. doi:10.18429/JACoW-CYCLOTRONS2019-FRA03
[n]	Ph. Guimbal et al., “Status of the ELSA-2 Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI066, pp. 1768-1770. 
[n]	M. J. Clarke, G. C. Murphy, R. N, and T. S. Richter, “Improving User Experience in Complex Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 813. doi:10.18429/JACoW-ICALEPCS2019-TUCPR04
[n]	F. Quetscher, H. De Gersem, and E. Gjonaj, “Shunt impedance calculations for an in-vacuum undulator at Petra IV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1064-1067. doi:10.18429/JACoW-IPAC2023-MOPM034
[n]	A. Z. Chen et al., “Test Results of PIP2IT MEBT Vacuum Protection System”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 278-281. doi:10.18429/JACoW-NAPAC2019-MOPLO19
[n]	N. Diehl, F. Hinterberger, T. Mayer-Kuckuk, and D. Prasuhn, “Beam Emittance Growth by Internal Target Effects in COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 714-717. 
[n]	Z. Mart?¡, J. Campmany, and M. Traveria, “A General Method for 2d Magnet Pole Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF032, pp. 1672-1674. 
[n]	F. Saint-Laurent et al., “Real Time Control of Long Duration Plasma Discharges in Tore Supra”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH115, pp. XX-XX. 
[n]	Y.-C. Du, Q. Du, W.-H. Huang, Y. Lin, C.-X. Tang, and S. Zheng, “Preliminary Experiment of the Thomson Scattering X-ray Source at Tsinghua University”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS044, pp. 3386-3388. 
[n]	A. R. Donaldson, “Telemetry of Control and Monitoring Signals Across a High-Voltage Interface Using Light Links”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-9, pp. 591-600. 
[n]	W. Chou, A. I. Drozhdin, C. Johnstone, D. Ritson, and S. Ohnuma, “An Imaginary γt Lattice for the Fermilab Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH022, pp. 1711-1713. 
[n]	Q. Kerns et al., “Fermilab Tevatron High Level RF Accelerating Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2809-2812. 
[n]	J. Grieser, J. Adamy, D. E. M. Lens, and H. Klingbeil, “A Method to Obtain the Frequency of the Longitudinal Dipole Oscillation for Modeling and Control in Synchrotrons with Single or Double Harmonic RF Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP061, pp. 2846-2848. 
[n]	K. Bertsche and J. Palkovic, “Beam Profile Measurement in the Presence of Noise”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB19, pp. 2572-2573. 
[n]	R. B. Meinke, A. Faltens, and R. O. Bangerter, “Conceptual Design of Superconducting Quadrupole Arrays for the Heavy-Ion Fusion”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP110, pp. 3215-3217. 
[n]	A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806. 
[n]	A. N. Payne, “System Modeling for the Longitudinal Beam Dynamics Control Problem in Heavy Ion Induction Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 736-739. 
[n]	C. Xu, H. Deng, G. Geloni, T. Long, B. Yan, and J. Yan, “Bayesian optimization for generating attosecond X-ray FEL pulses”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 146-149. doi:10.18429/JACoW-IPAC2025-MOPB038
[n]	J. Tueckmantel, “Review of Experience with Superconducting Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 279-284. 
[n]	C.-C. Kuo et al., “Vertical Beam Size Control in TLS and TPS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS067, pp. 3442-3444. 
[n]	L. Hagge, M. Huening, and J. Kreutzkamp, “Engineering Collaboration Experience at the European XFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2604-2606. doi:10.18429/JACoW-IPAC2017-WEPAB018
[n]	M. Ono et al., “Development of TESLA-type Cavity at KEK”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPP07, pp. 1629-1631. 
[n]	Z. Sun, Z. Baraissov, M. Liepe, D. A. Muller, T. E. Oseroff, and M. O. Thompson, “Materials Design for Superconducting RF Cavities: Electroplating Sn, Zr, and Au onto Nb and and Chemical Vapor Deposition”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 401-404. doi:10.18429/JACoW-SRF2023-TUPTB006

For LaTeX

Use Complete Form

For BibTeX

References

Back to search