JaCoW Logo

Reference Search
Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	W. Leijenaar, “Design of a 2300 W 352 MHz solid-state amplifier module with integrated EtherCAT interface for monitoring and control”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1771-1774. doi:10.18429/JACoW-IPAC2025-WEPB021
[n]	H. Ohgaki, Y. Iwasaki, S. Koda, Y. Takabayashi, T. Tomimasu, and K. Yoshida, “Global COD Correction of SAGA-LS Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN044, pp. 3327-3329. 
[n]	C. M. Bhat et al., “The Main Injector Chromaticity Correction Sextupole Magnets: Measurements and Operating Schemes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP05, pp. 1334-1336. 
[n]	A. Ando, T. Suzuki, E. Takasaki, and K. Takayama, “Coupling Resonance 2 vh - 2 vv = 0 in the KEK Proton Synchrotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3541-3544. 
[n]	Y. Suetsugu et al., “First Commissioning of the SuperKEKB Vacuum System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1086-1088. doi:10.18429/JACoW-IPAC2016-TUOCB01
[n]	V. Bechtold, L. Friedrich, and F. Schulz, “External Ion Sources at the Karlsruhe Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B28, pp. 118-121. 
[n]	C. M. Ankenbrandt, R. J. Abrams, T. J. Roberts, C. Y. Yoshikawa, and D. V. Neuffer, “Novel Muon Beam Facilities for Project X at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD043, pp. 457-459. 
[n]	M. Mori et al., “Stabilization of Laser Accelerated Electron Bunch by the Ionization-stage Control”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC003, pp. 4062-4064. 
[n]	E. Sombrowski, A. Petrosyan, K. Rehlich, and W. Sch??tte, “jddd, a State-of-the-art Solution for Control Panel Development”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THBHAUST04, pp. 1189-1192. 
[n]	H. Li et al., “First High Power Test of the ESS High Beta Elliptical Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 841-844. doi:10.18429/JACoW-LINAC2018-THPO066
[n]	C. Darve et al., “The Superconducting Radio-Frequency Linear Accelerator Components for the European Spallation Source: First Test Results”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 651-656. doi:10.18429/JACoW-LINAC2016-WE1A03
[n]	Y. Tadenuma, M. Brameld, T. Murakami, K. Sakaue, and M. Washio, “Study on Coherent THz Radiation Using Tilt Control of Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1489-1491. doi:10.18429/JACoW-IPAC2019-TUPGW038
[n]	P. F. Beloshitsky, I. N. Meshkov, E. M. Syresin, and I. V. Titkova, “Magnet Lattice of the Synchrotron Radiation Source DELSY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B05, pp. 708-710. 
[n]	S. Inagaki, “Periodic Approach to Space Charge Limit in Proton Linear Accelerators”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3501-3504. 
[n]	M. Notani, C. M. Ankenbrandt, R. P. Johnson, T. J. Roberts, and C. Bowman, “Handling GEM*STER Volatile Radioactive Fission Products”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR062, pp. 4115-4117. 
[n]	N. Miyawaki, H. Kashiwagi, S. Kurashima, S. Okumura, and M. Fukuda, “Analysis of Phase Bunching in the Central Region of the JAEA AVF Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT014, pp. 350-352. 
[n]	S. Ohnuma, “Bunching for High-Intensity Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 8-02, pp. 273-278. 
[n]	Y. Kimura, T. Kamei, T. Kawakubo, and K. Takata, “Synchronous Transfer of Beam from the Booster to the Main Ring in the KEK Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1461-1464. 
[n]	M. Neubauer et al., “High-Power RF Window Design for the PEP-II B Factory”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2033-2036. 
[n]	J. Petter, J. Marriner, and J. McCarthy, “Transverse Beam Dampers for the FNAL  Antiproton Rings”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 791-794. 
[n]	R. Santiago Kern et al., “The HNOSS Horizontal Cryostat and the Helium Liquefaction Plant at FREIA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2759-2761. doi:10.18429/JACoW-IPAC2014-WEPRI110
[n]	Z. C. Liu et al., “High Current Superconducting Cavity Study and Design”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO023, pp. 2366-2368. 
[n]	T. Ladzinski, M. Gateau, P. Martel, A. Siemko, and D. Widegren, “Configuration Management System for the LHC Superconducting Magnet Test Benches”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP521, pp. XX-XX. 
[n]	C. Charrondi?¿re, A. Rijllart, M. Bajko, J. G. Perez, E. Gorskaia, and G. Koltin, “Magnetic Axis and Geometric Measurement for the LHC Cryomagnet”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP575, pp. XX-XX. 
[n]	Y. Chen et al., “Frequency-Detuning Dependent Transient Coaxial RF Coupler Kick”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 599-602. doi:10.18429/JACoW-FEL2019-THP007
[n]	Z. C. Liu et al., “IHEP03 Fabrication and Testing Status”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO022, pp. 2364-2365. 
[n]	R. Pendleton et al., “Broad-Band, Multi-Kilowatt, Vacuum, HOM Waveguide Loads for the PEP-II RF Cavity”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2013-2016. 
[n]	Z. G. He, Q. K. Jia, B. G. Sun, and X. H. Wang, “Commissioning of a Photoinjector in HLS”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA01, pp. 331-333. 
[n]	A. Raimondo et al., “The Hardware Recognition System for the SM18 LHC Cryomagnet Test Benches”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP522, pp. XX-XX. 
[n]	T. T. Arkan et al., “LCLS-II 1.3 GHz Design Integration for Assembly and Cryomodule Assembly Facility Readiness at Fermilab”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB110, pp. 893-897. 
[n]	W. Lisowski and Kevin W, “Status of The Los Alamos Neutron Science Center and Plans for The Future”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU433, pp. 386-388. 
[n]	M. L. Neubauer, R. P. Johnson, A. Moretti, and M. Popovic, “Phase and Frequency Locked Magnetrons for SRF Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP019, pp. 852-854. 
[n]	S. Ohnuma and Th. Sluyters, “Limitations of Acceleration of Deuterons in Alvarez-Type Proton Linacs”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper H02, pp. 191-196. 
[n]	K. Yonehara et al., “Simulation of Beam-induced Gas Plasma in High Gradient RF Field for Muon Colliders”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI058, pp. 1478-1480. 
[n]	A. U. Luccio, J. Beebe-Wang, and N. L. D, “Space Charge Dynamics Simulated in 3-D in the Code ORBIT”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE058, pp. 1368-1370. 
[n]	R. A. Byrns, W. S. Gilbert, G. R. Lambertson, R. B. Meuser, and J. B. Rechen, “Items from the Construction of ESCAR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1325-1328. 
[n]	S. Jin et al., “Development of Frequency Measurement Setup for ADS 650MHz and 1.3GHz Superconducting RF Cavities at IHEP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO019, pp. 2358-2360. 
[n]	S. Ahmed, K. B. Beard, T. J. Roberts, D. M. Kaplan, and L. K. Spentzouris, “Interaction of Muon Beam with Plasma Developed During Ionization Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THXB01, pp. 3200-3202. 
[n]	M. A. Rayner and J. H. Cobb, “Measurements of Muon Beam Properties in MICE”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE061, pp. 3482-3484. 
[n]	B. C. Brown, “Beam Loss Control for the Fermilab Main Injector”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO1B04, pp. 264-268. 
[n]	R. Yanagisawa, T. Toida, K. Kan, K. Sakaue, and M. Washio, “Study on a Time-Domain Spectroscopy System for Coherent Terahertz Pulse Spectrum Measurement from 5 MeV Electron Beam”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4003-4006. doi:10.18429/JACoW-IPAC2017-THPAB119
[n]	P. N. Ostroumov et al., “Accelerator Physics Advances in FRIB (Facility for Rare Isotope Beams)”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2950-2952. doi:10.18429/JACoW-IPAC2018-THYGBF4
[n]	S. Okumura et al., “Control System for JAERI AVF Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-04, pp. 648-651. 
[n]	R. P. Johnson, C. M. Ankenbrandt, C. M. Bhat, S. A. Bogacz, Y. S. Derbenev, and M. Popovic, “Muon Bunch Coalescing”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN095, pp. 2930-2932. 
[n]	R. E. Pollock, “Invited Paper: Storage Rings for Cyclotrons”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper O01, pp. 583-588. 
[n]	A. Miyamoto and S. Sasaki, “Ultra-Low Emittance Light Source with a Torus-knot Type Accumulator Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO04, pp. 240-242. 
[n]	T. J. Roberts and P. L. Gueye, “MuSim, a Graphical User Interface for Multiple Simulation Programs”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 678-680. doi:10.18429/JACoW-IPAC2015-MOPMA055
[n]	K. Takayama, T. Adachi, and K. W. Leo, “The Einzel Lens Longitudinal Chopper”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEYO01, pp. 95-100. 
[n]	K. H?Âppner et al., “Integration of Abeans and ACS in the GSI Controls Environment”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP539, pp. XX-XX. 
[n]	E. Minehara and K. Whitham, “83 MHz Electron Gun System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP28F, pp. 1474-1478. 
[n]	S. Ohnuma, “Particle Motions and the Focusing System in Proton Linacs”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART3-3, pp. 266-282. 
[n]	Z. C. Liu et al., “ADS 650MHz =0.82 Supercongducting Cavity Research Status”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO021, pp. 2361-2363. 
[n]	M. A. Rayner and M. Bonesini, “The MICE PID Detector System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE079, pp. 1164-1166. 
[n]	K. Hatanaka et al., “A HTS Scanning Magnet and AC Operation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB036, pp. 352-354. 
[n]	T. Nakagawa et al., “Production of Intense Beams of Highly Charged Heavy Ions from RIKEN 18 GHz ECRIS and Liquid He Free SC-ECRIS”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper G-4, pp. XX-XX. 
[n]	J. Beebe-Wang, N. L. D, A. U. Luccio, and S. Machida, “Space Charge Simulation Methods Incorporated in some Multi-Particle Tracking Codes and their Results Comparison”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE059, pp. 1329-1331. 
[n]	K. Tsuchiya et al., “Superconducting Magnet System for the TRISTAN Low-Beta Insertion”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1151-1154. 
[n]	E. Chiaveri, “Production by Industry of a Large Number of Superconducting Cavities: Status and Future”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95G01, pp. 181-194. 
[n]	W. S. Gilbert, “Radiation Problems with High-Energy Proton Accelerators”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 965-977. 
[n]	T. Ishida, “Neutrino and Other Beam-Lines at J-PARC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUXKI03, pp. 686-690. 
[n]	K. Nakajima et al., “Polarization Study in TRISTAN”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 717-720. 
[n]	S. Hunt, “The Design of Very High Availability Accelerator Control Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP519, pp. XX-XX. 
[n]	S. Ohnuma, “Coupled Motion in Low-Energy Proton Linear Accelerators”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper V-03, pp. 214-219. 
[n]	J. Tamura et al., “Numerical Study on the Effect of Magnetic Shield of a Bunch Shape Monitor in J-PARC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO035, pp. 3842-3844. 
[n]	R. E. Pollock, “Physics with Storage Rings (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XIV-03, pp. 753-757. 
[n]	R. Cassel and H. Pfeffer, “The Power Supply System, Control, and Response of the NAL Main Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 860-864. 
[n]	M. Li and S. Ohnuma, “Two-Parameter Sorting of Dipoles in Large Synchrotrons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1175-1178. 
[n]	C. Liu et al., “Reducing Spin Tune Spread by Matching DX Prime at Snakes in RHIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO074, pp. 2030-2032. 
[n]	E. Mahner and W. Weingarten, “A Feasibility Study of a Triaxial Cavity to Determine the Surface Resistance of Superconducting Samples”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B04, pp. 316-330. 
[n]	G. Velev et al., “Fermilab Superconducting Nb?Sn High Field Magnet R&D Program”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4338-4341. doi:10.18429/JACoW-IPAC2019-THPTS099
[n]	M. Apollonio and M. A. Rayner, “Optimization of the MICE Muon Beam Line”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE052, pp. 3461-3463. 
[n]	N. Miyawaki, H. Kashiwagi, S. Kurashima, S. Okumura, and M. Fukuda, “Phase Bunching in the Central Region of the JAEA AVF Cyclotron for Heavy-Ion Acceleration in the Third-Harmonic Mode”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA11, pp. 62-64. 
[n]	H. Kashiwagi, S. Kurashima, N. Miyawaki, and S. Okumura, “Transverse-acceptance Measurement System for the JAEA AVF Cyclotron”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB65, pp. 499-501. 
[n]	C. Montag, N. L. D, J. Kewisch, R. Lee, and T. Satogata, “Longitudinal Phase-Space Tomography in RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI074, pp. 1942-1944. 
[n]	M. Popovic, “Ferrite Tuned Cavity as Possible Source of Bunched Beam Instability”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 655-658. 
[n]	S. A. Kahn, M. A. C. Cummings, T. J. Roberts, D. Hedin, A. O. Morris, and J. F. Kozminski, “Bethe-Heitler Muon Background at a Muon Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC038, pp. 214-216. 
[n]	T. J. Roberts, “G4beamline Code Development”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC084, pp. 334-336. 
[n]	K. Lee, E. Hashimoto, S. Hirai, T. Natsui, M. Uesaka, and T. Yamamoto, “Material Recognition System using 950 keV X-band Linac with Dual Energy X-ray Scintillator Array”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA030, pp. 130-132. 
[n]	A. Aragona et al., “New Injection System for ADONE”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1243-1246. 
[n]	S. Sasaki and A. Miyamoto, “Use of the Projected Torus Knot Lattice for a Compact Storage Ring FEL”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUOC03, pp. 221-224. 
[n]	A. T. Visser, “Protective Relaying and Monitoring of the Ring Magnet Power Supply for the Argonne National Laboratory Zero Gradient Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 507-512. 
[n]	M. Zobov et al., “DAFNE Operation and Plans for DAFNE2”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAA001, pp. 112-116. 
[n]	A. Facco, V. Zviagintsev, E. Chiaveri, and R. E. Laxdal, “The Superconducting Medium Beta Prototype for Radioactive Beam Acceleration at TRIUMF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH134, pp. 1092-1094. 
[n]	E. Kadokura, T. Ishida, and T. Kawakubo, “Direct Measuring System of the Time Dependence of the Beam Size by a Non-destructive Beam Profile Monitor”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1652-1655. 
[n]	T. S. Dixit, Y. Shimosaki, and K. Takayama, “Adiabatic Damping During Acceleration in the Induction Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN033, pp. 4009-4011. 
[n]	D.-O. Jeon and P. Chu, “Transverse Matching of the SNS Linac Based on Profile Measurements”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA105, pp. 250-252. 
[n]	G. W. Wheeler, “Status Report on the Coaxitron Development Program”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-9, pp. 531-532. 
[n]	J. Petter, J. Marriner, and D. McGinnis, “Novel Stochastic Cooling Pickups/Kickers”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 636-639. 
[n]	K. Hatanaka, M. Fukuda, T. Yorita, T. Kawaguchi, K. Noda, and Y. Sakemi, “Application of HTS Wire to Magnets”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP085, pp. 224-226. 
[n]	W. S. Gilbert and F. Voelker, “Measured Losses in Pulsed Superconducting Magnets”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 717-720. 
[n]	V. G. Ziemann and L. Hermansson, “Tracking the Helium Balance in FREIA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1202-1204. doi:10.18429/JACoW-IPAC2016-TUPMB047
[n]	B. C. Brown et al., “Fermilab Main Injector Collimation Systems: Design, Commissioning and Operation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP025, pp. 2841-2843. 
[n]	A. Afanasev et al., “Quasi-Monoenergetic Photon Source Based on Electron-Positron In-Flight Annihilation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA043, pp. 169-171. 
[n]	Y. Zhang, P. Chu, and Z. Q. He, “Phase and Amplitude Tuning Algorithms for the FRIB Superconducting Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1207-1210. doi:10.18429/JACoW-IPAC2015-MOPWI025
[n]	A. Osa et al., “The RI Beams from the Tokai Radioactive Ion Accelerator Complex (TRIAC)”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper MO-03, pp. XX-XX. 
[n]	X. Singer et al., “Surface Investigation on Prototype Cavities for the European XFEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC007, pp. 2902-2904. 
[n]	T. Toida, M. Washio, R. Yanagisawa, and K. Sakaue, “Development of an EO Sampling Method for THz Pulse Detection”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 155-157. doi:10.18429/JACoW-IPAC2016-MOPMB030
[n]	D. J. Harding et al., “Restoring the Skew Quadrupole Moment in Tevatron Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT053, pp. 3244-3246. 
[n]	J. T. Volk et al., “Adjustable Permanent Quadrupoles for the Next Linear Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB012, pp. 217-219. 
[n]	A. U. Luccio, J. Beebe-Wang, N. L. D'Imperio, and R. Samulyak, “Solving by Parallel Computation the Poisson Problem for High Intensity Beams in Circular Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB005, pp. 270-272. 
[n]	K. R. Chu, F. Schoenfeld, Y. C. Tsai, and E. Weihreter, “Layout of a Broadband Circular Waveguide to Coaxial Transition”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP003L, pp. 1937-1939. 
[n]	A. Y. Molodozhentsev, A. Ando, T. Koseki, M. J. Shirakata, J. Takano, and M. Tomizawa, “Study of the Beam Dynamics for the 'Fast Extraction' Operating Scenario of the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD009, pp. 1937-1939. 
[n]	F. Tazzioli et al., “Activities on RF Superconductivity in Frascati, Genova, Milano Laboratories”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89A06, pp. XX-XX. 
[n]	H. Yokomizo et al., “Injection System for the 8 GeV Synchrotron Radiation Facility in Japan”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1245-1248. 
[n]	J. R. Zagel et al., “Permanent Magnet Ion Profile Monitor at the Fermilab Main Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH036, pp. 1303-1305. 
[n]	Y. Enomoto, K. Furukawa, T. Natsui, M. Satoh, and H. S. Saotome, “Pulsed Magnet Control System Using COTS PXIe Devices and LabVIEW”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 945. doi:10.18429/JACoW-ICALEPCS2019-WECPR05
[n]	H. Zhang, A. Freyberger, G. A. Krafft, Y. Roblin, and B. Terzic, “Optimization of the RF Cavity Heat Load and Trip Rates for CEBAF at 12 GeV”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1170-1173. doi:10.18429/JACoW-IPAC2017-MOPVA133
[n]	E. Sombrowski and K. Rehlich, “First Experiences with jddd for PETRA Vacuum Controls”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUZ04, pp. 74-76. 
[n]	S. Kurashima, H. Kashiwagi, N. Miyawaki, and M. Fukuda, “Improvement of Mass-to-Charge Ratio Resolution of the JAEA AVF Cyclotron Using a Beam Chopping System”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA13, pp. 68-70. 
[n]	D. S. Dancila et al., “A Compact 10 kW Solid-State RF Power Amplifier at 352 MHz”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4292-4295. doi:10.18429/JACoW-IPAC2017-THPIK088
[n]	Y. Hashimoto et al., “Beam Profile Monitor for Slow Extracted Beam Using Multi-Layered Graphene at J-PARC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2532-2535. doi:10.18429/JACoW-IPAC2019-WEPGW030
[n]	S. Ninomiya, K. Hatanaka, Y. Sakemi, T. Kawaguchi, and N. Takahashi, “The Study of High Magnetic Field and AC Operation of High Temperature Superconducting Magnet”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM403, pp. XX-XX. 
[n]	S. Ohnuma, “On a Uniform Charge Density of a Beam and its Phase-Space Distribution”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper V-04, pp. 220-223. 
[n]	Y. Suetsugu, T. Ishibashi, S. Terui, H. Ishizaki, A. Kimura, and T. Sawhata, “Fabrication of Ferrite-Copper Block by Spark Plasma Sintering (SPS)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3654-3656. doi:10.18429/JACoW-IPAC2016-THPMY002
[n]	H. Li et al., “RF Test of ESS Superconducting Spoke Cavities at Uppsala University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2227-2229. doi:10.18429/JACoW-IPAC2016-WEPMB050
[n]	I. Kourbanis et al., “Current and Future High Power Operation of Fermilab Main Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP060, pp. 1421-1423. 
[n]	S. Kurokawa et al., “KEK NODAL System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2071-2074. 
[n]	D. Carey, “Achromaticity vs. Isochronicity”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2409-2412. 
[n]	Y. Yamamoto et al., “Performance of the 1 GeV Electron Storage Ring for the Synchrotron Radiation Source at SORTEC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 475-478. 
[n]	W. S. Gilbert and R. H. Thomas, “Problems of Induced Radioactivity Around the 200 - BeV Alternating-Gradient Synchrotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 665-668. 
[n]	V. G. Ziemann, A. K. Bhattacharyya, M. Holz, and J. Oegren, “Wave Propagation in a Fractal Wave Guide”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3128-3130. doi:10.18429/JACoW-IPAC2017-WEPIK086
[n]	J. Y. Tang, W. Lei, and Y. F. Wang, “A New Buncher System for SFC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-26, pp. 265-268. 
[n]	I. N. Meshkov, E. L. Saldin, E. A. Schneidmiller, E. M. Syresin, and M. V. Yurkov, “Perspective of DELSY for the Fourth Generation SR Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B02, pp. 660-662. 
[n]	E. Sombrowski, P. Gessler, J. M. Meyer, A. Petrosyan, and K. Rehlich, “JDDD in Action”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP035, pp. 164-166. 
[n]	R. Rimmer et al., “High-Power RF Cavity R&D for the PEP-II B Factory”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2101-2104. 
[n]	J. Marriner, “Review of the Physics, Technology and Practice of Stochastic Beam Cooling”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1383-1388. 
[n]	J. Shi, R. L. Gluckstern, and S. Ohnuma, “Diffusion rate for the Emittance Growth due to Periodic Crossings of Nonlinear Coupled Resonances”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 714-717. 
[n]	B. X. Yang, W. E. Norum, S. E. Shoaf, and J. B. Stevens, “Bunch-by-Bunch Diagnostics at the APS Using Time-Correlated Single-Photon Counting Techniques”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM044, pp. 238-242. 
[n]	G. W. Wheeler, “RF Power Developments”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper D-03, pp. 303-305. 
[n]	M. Popovic et al., “Phase and Frequency Locked Magnetrons for SRF Sources”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP083, pp. 979-981. 
[n]	H. Tomizawa et al., “Novel Nondestructive Shot-by-Shot Monitor to Measure 3D Bunch Charge Distribution With a Femtosecond EO-Sampling”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB20, pp. 445-448. 
[n]	B. C. Brown, “Collimation System for Beam Loss Localization with Slip Stacking Injection in the Fermilab Main Injector”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC11, pp. 312-319. 
[n]	Y. Yuri et al., “Formation of a Uniform Ion Beam Using Multipole Magnets”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP082, pp. 3895-3897. 
[n]	J. W. Glenn, I. Chiang, D. Lazarus, M. Sivertz, and S. Koscielniak, “Micro-Bunching of the AGS Slow Extracted Beam for a Rare Kaon Decay Search”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH135, pp. 1529-1531. 
[n]	T. Nagatsuka, T. Koseki, Y. Kamiya, and Y. Terada, “3D Numerical Analysis of Magnets and the Effect of Eddy Current on Fast Steering”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP22, pp. 1384-1386. 
[n]	H. P. Ehret et al., “The Ion Sources at the Karlsruhe Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F1-07, pp. 194-196. 
[n]	S. Kurokawa et al., “Software Development in the TRISTAN Control”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 698-701. 
[n]	M. Popovic and J.-F. Ostiguy, “A Concept: 8GeV CW Linac, Staged Approach”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB017, pp. 885-887. 
[n]	W. Chou et al., “Operational Aspects of the Main Injector Large Aperture Quadrupole”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS015, pp. 1685-1687. 
[n]	K. Hosono, M. Kibayashi, I. Miura, and J. Abe, “Magnetic System of the RCNP Ring-Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-04, pp. 474-477. 
[n]	J. Cobb, N. L. D, J. D. Galambos, J. A. Holmes, A. U. Luccio, and D. K. Olsen, “Parallel Tracking in Rings with Space Charge”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A05, pp. 1372-1374. 
[n]	R. E. Pollock, “Status Report on the Indiana University Cyclotron Facility (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-02, pp. 27-32. 
[n]	R. E. Pollock, “Coupling Cyclotrons to Other Machines”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper HI-01, pp. 731-736. 
[n]	B. C. Brown and G. H. Wu, “Measuring Correlations Between Beam Loss and Residual Radiation in the Fermilab Main Injector”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO2C04, pp. 391-394. 
[n]	T. Tomimasu, “A 500 MeV Low Operating Cost Electron Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3523-3526. 
[n]	D. E. Johnson and S. Ohnuma, “MESSYMESH - An Improved Version”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C02, pp. 119-121. 
[n]	H. Ikegami, “Invited Paper: Cyclotron Maser Cooling of Electron and Ion Beams”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper C-01, pp. 55-61. 
[n]	T. J. Roberts, “LinguaFranca - A Graphical User Interface for Accelerator Modeling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC083, pp. 331-333. 
[n]	J. Beebe-Wang, N. L. D, A. U. Luccio, S. Peggs, and S. Y. Zhang, “Beam Dynamics Simulation in the Rapid Cycling Medical Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI082, pp. 2718-2720. 
[n]	K. Yoshida et al., “Commissioning of a Compact Synchrotron Radiation Source at Hiroshima University”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6B002, pp. 653-657. 
[n]	S. Hunt, “Integration of Industrial PLCs into an EPICS Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP550, pp. XX-XX. 
[n]	S. Kurashima, I. Ishibori, T. Nara, W. Yokota, and M. Taguchi, “Progress in Formation of Single-Pulse Beams by a Chopping System at the JAEA/TIARA facility”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP090, pp. 233-235. 
[n]	M. Kodaira et al., “Design and Performance of the Electron Synchrotron for the 1-GeV Synchrotron Radiation Source at Sortec”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 409-412. 
[n]	K. Ammigan et al., “The RaDIATE High-Energy Proton Materials Irradiation Experiment at the Brookhaven Linac Isotope Producer Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3593-3596. doi:10.18429/JACoW-IPAC2017-WEPVA138
[n]	S. Sato et al., “Study of J-PARC Linac Beam Position Monitor as Phase Monitor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP061, pp. 3591-3593. 
[n]	K. W. Leo, T. Adachi, T. Kawakubo, T. Monma, K. Takayama, and T. S. Dixit, “A Compact Hadron Driver for Cancer Therapies with Continuous Energy Sweep Scanning”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper FRM1C03, pp. 291-293. 
[n]	M. Popovic, “Muon Test Area at Fermilab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT118, pp. 812-814. 
[n]	R. Kinjo et al., “End Field Termination for Bulk HTSC Staggered Array Undulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD029, pp. 3156-3158. 
[n]	P. Krejcik et al., “Recent Improvements in the SLC Positron System Performance”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 527-530. 
[n]	M. Eshraqi et al., “Conceptual Design of the ESS LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD053, pp. 804-806. 
[n]	C. Yao, W. E. Norum, and J. Wang, “An FPGA-based Tune Measurement System for the APS Booster Synchrotron”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF078, pp. 303-306. 
[n]	M. Wilson, D. Anderson, C. Pappas, and L. Schneider, “Fast Kicker Requirements for the SSC's Low and Medium Energy Boosters”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 863-866. 
[n]	H. Geng et al., “Issues in CEPC Pretzel and Partial Double Ring Scheme Design”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 39-42. doi:10.18429/JACoW-eeFACT2016-MOT3BH3
[n]	H. Ikegami, “Invited Paper: The RCNP Ring Cyclotron Facilities”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper B-03, pp. 30-39. 
[n]	G. W. Wheeler, “Status of the BNL 200-MeV Injector Linac”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper A-1, pp. 1-14. 
[n]	W. S. Gilbert et al., “Superconducting Beam Transport Magnets for the Bevatron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 683-688. 
[n]	H. Hotchi et al., “High-Intensity Demonstrations in the J-PARC 3-GeV RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP090, pp. 1504-1506. 
[n]	G. Cox, “Control Desk: A Generic Control Application for the SRS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP564, pp. XX-XX. 
[n]	S. Johnson, G. A. Krafft, and B. Terzic, “Mobile Free-Electron Laser for Remote Atmospheric Survey”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4351-4353. doi:10.18429/JACoW-IPAC2018-THPMK026
[n]	C. Biscari et al., “Status of LISA Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 511-514. 
[n]	G. F. Krebs et al., “New High-Dispersion Beamlines at the Bevalac for the Production, Purification and Transport of Radioactive Beams”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 848-851. 
[n]	T. Kurita, S. Fukumoto, S. H. Hatori, and S. Ninomiya, “An Improvement of Matching Circuit of RF Kicker Electrodes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS114, pp. 1771-1773. 
[n]	Q. Qin et al., “Beam Dynamic Issues in the BEPCII Luminosity Commissioning”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB020, pp. 1560-1562. 
[n]	Y. F. Wang, W. Lei, and J. Y. Tang, “Consideration of HIRFL Vacuum Pressure”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-41, pp. 301-304. 
[n]	D. Filippetto et al., “Diagnostic for a High Repetition Rate Electron Photo-Gun and First Measurements”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOAL3, pp. 4-7. 
[n]	J. H. Thie et al., “Mechanical Design of Automatic Cavity Tuning Machines”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO074, pp. 797-800. 
[n]	G. W. Wheeler and T. W. Ludlam, “A Possible Approach to the Initial Adjustment of a Long Linac”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART6-1, pp. 533-539. 
[n]	K. H. Assmus, K. J?ñger, F. Schulz, R. Sch??tz, and H. Schweickert, “Routine Production of Iodine-123 at the Karlsruhe Isochronous Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-11, pp. 2265-2268. 
[n]	M. Nishiyama et al., “Longitudinal Diagnostics of RF Electron Gun using a 2-cell RF Deflector”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP084, pp. 929-932. 
[n]	T. Junquera et al., “Design of a New Horizontal Test Cryostat for SCRF Cavities at the Uppsala University”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP080, pp. 328-330. 
[n]	Y. Kimura, “The Performance of TRISTAN and Accelerator Development at KEK”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 23-28. 
[n]	B. Autin, J. Marriner, A. Ruggiero, and K. Takayama, “Fast Betatron Cooling in the Debuncher Ring for the Fermilab Tevatron I Project”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2593-2596. 
[n]	E. Chiaveri, “Large-Scale Industrial Production of Superconducting Cavities”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEZ01A, pp. 200-204. 
[n]	A. Miyamoto, H. Hara, K. Sennyu, and T. Yanagisawa, “SRF Cavity Assembly in Clean Room with Horizontal Laminar Flow”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 620-622. doi:10.18429/JACoW-SRF2017-TUPB096
[n]	B. Alberdi-Esuain, J.-G. Hwang, T. Kamps, A. Neumann, and J. V?Âlker, “Prospects of Ultrafast Electron Diffraction Experiments at Sealab”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2201-2204. doi:10.18429/JACoW-IPAC2022-WEPOTK060
[n]	Y. Ogawa et al., “Operation Status and Statistics of the KEK Electron/Positron Linac”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS138, pp. 2700-2702. 
[n]	R. M. Zwaska, B. C. Brown, I. Kourbanis, A. Marchionni, and E. Prebys, “Beam Loss at the Fermilab Booster and Main Injector: Recent Experience and the Road to MW Class Beams”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAZ02, pp. XX-XX. 
[n]	J. N. Corlett et al., “Impedance and Instabilities in the NLC Damping Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH076, pp. 1841-1843. 
[n]	J. Blau, D. T. Burggraff, W. B. Colson, and T. Voughs, “Simulations of High Power-FEL Amplifiers”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH075, pp. 222-225. 
[n]	I. Kourbanis et al., “A Gap Clearing Kicker for Main Injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP205, pp. 1870-1872. 
[n]	J. Blau, K. R. Cohn, and W. B. Colson, “Four-Dimensional Models of FEL Amplifiers and Oscillators”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 607-614. doi:10.18429/JACoW-FEL2015-WEP008
[n]	J. Oegren, A. K. Bhattacharyya, M. Holz, J. M. Y. Ruber, V. G. Ziemann, and W. Farabolini, “Beam-Based Alignment Studies at CTF3 Using the Octupole Component of CLIC Accelerating Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 371-373. doi:10.18429/JACoW-IPAC2017-MOPAB108
[n]	D. J. Harding et al., “Air-Cooled Trim Dipoles for the Fermilab Main Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P034, pp. 3291-3293. 
[n]	G. W. Wheeler, “Progress in Proton Linear Accelerators”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 345-351. 
[n]	M. Brameld et al., “Evaluation of Coherent Terahertz Radiation Generated from Tilted Electron Beams Aiming for Higher Light Intensity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4642-4644. doi:10.18429/JACoW-IPAC2018-THPMK145
[n]	S. Ninomiya, T. Adachi, S. Fukumoto, S. H. Hatori, and T. Kurita, “Dual-mode Beam Current Monitor”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH059, pp. 1145-1147. 
[n]	S. Hunt, “The Control System for the SLS Superconducting Third Harmonic Cavities.”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP545, pp. XX-XX. 
[n]	R. M. Thurman-Keup, A. S. Johnson, A. H. Lumpkin, J. C. T. Thangaraj, D. H. Zhang, and W. Blokland, “Initial Characterization of a Commercial Electron Gun for Profiling High Intensity Proton Beams in Project X”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP225, pp. 525-527. 
[n]	M. Krasilnikov et al., “Beam-Based Procedures for RF Guns”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP005, pp. 967-969. 
[n]	M. Popovic, C. M. Ankenbrandt, M. A. C. Cummings, R. P. Johnson, A. Moretti, and M. L. Neubauer, “Dielectric Loaded RF Cavities for Muon Facilities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA047, pp. 3783-3785. 
[n]	K. L. F. Bane et al., “First Bunch Length Studies in the SLC South Final Focus”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP19H, pp. 487-492. 
[n]	M. Tomizawa et al., “Slow Beam Extraction TARN-II”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1488-1491. 
[n]	H. Li et al., “Test Characterization of Superconducting Spoke Cavities at Uppsala University”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB083, pp. 791-794. 
[n]	B. C. Brown, N. S. Chester, D. J. Harding, and P. S. Martin, “The Design and Manufacture of the Fermilab Main Injector Dipole Magnet”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1376-1379. 
[n]	M. Hosaka et al., “Present Status of Accelerators in Aichi Synchrotron Radiation Center”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2691-2693. doi:10.18429/JACoW-IPAC2017-WEPAB048

For LaTeX

Use Complete Form

For BibTeX

References

Back to search