Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2675-2677. doi:10.18429/JACoW-IPAC2014-WEPRI078
[n] M. Carl?á, G. Benedetti, T. F. G. G??nzel, U. Iriso, and Z. Mart?¡, “Local Impedance Measurements at ALBA from Turn-by-Turn Acquisition”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 598-601. doi:10.18429/JACoW-IPAC2016-MOPOR007
[n] C. S. Yang, C.-H. Chang, Y. L. Chu, T. Y. Chung, C.-S. Hwang, and F.-Y. Lin, “Design and Performance of the TPS DC Septum Magnet”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1301-1303. doi:10.18429/JACoW-IPAC2014-TUPRO108
[n] Y.-H. Liu et al., “The HV Withstands Test for In Vacuum Booster Kicker”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA043, pp. 765-767.
[n] Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz TESLA-type SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3594-3596. doi:10.18429/JACoW-IPAC2015-WEPWI046
[n] P. Songsiriritthigul et al., “Improvement of BPM System for the Siam Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR053, pp. 903-905.
[n] F. H. Chao et al., “Room-temperature Burst-mode GHz and THz Pulse-train Photoinjector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1492-1494. doi:10.18429/JACoW-IPAC2014-TUPME055
[n] T. L. Vardanyan, M. Ivanyan, V. Sahakyan, A. V. Tsakanian, and G. S. Zanyan, “Modal Analysis of Helical Undulator Radiation In Cylindrical Waveguide”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1989-1991. doi:10.18429/JACoW-IPAC2014-WEPRO022
[n] G.-Y. Hsiung et al., “Progress of the Construction for the TPS Vacuum System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUODB01, pp. 976-978.
[n] K. Escherich et al., “Electro Polishing at DESY, A Set Up for Multi-cell Resonator Treatment”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT015, pp. XX-XX.
[n] M. Pont, “Operation Status of ALBA Synchrotron Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP023, pp. 1659-1661.
[n] B. Grigoryan et al., “Advanced Research Electron Accelerator Laboratory Based on Photocathode RF Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC031, pp. 1066-1068.
[n] Y.-H. Liu, J.-C. Chang, C. S. Chen, H. H. Chen, and J.-R. Chen, “Conductive EMI Reduction to Kicker Magnet Power Supply in NSRRC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD059, pp. 3647-3649.
[n] L. Yu, Y. F. Sui, J. X. Zhao, and D. C. Zhu, “Design and Application of Double-slit Emittance Meter for C-ADS Proton Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 164-166. doi:10.18429/JACoW-IPAC2016-MOPMB034
[n] M. Kuriki et al., “High Aspect Ratio Beam Generation with the Phase-space Rotation Technique for Linear Colliders”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 685-687. doi:10.18429/JACoW-LINAC2018-THPO005
[n] J. W. McKenzie and B. L. Militsyn, “A Velocity Bunching Scheme for Creating Sub-picosecond Electron Bunches from an RF Photocathode Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC132, pp. 3194-3196.
[n] R. Gobin, O. Delferriere, F. Harrault, B. Pottin, and O. Tuske, “High Intensity Helium Beam at CEA/Saclay”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-20, pp. 115-115.
[n] A. Salom, J. M. Alvarez, B. Bravo, and F. P?®rez, “HOM Damped Normal Conducting 1.5 GHz Cavity Design Evolution for the 3rd Harmonic System of the ALBA Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2948-2951. doi:10.18429/JACoW-IPAC2019-WEPRB060
[n] A. Sargsyan, V. Sahakyan, G. S. Zanyan, and W. Decking, “New BBA Algorithm for Electron Beam Orbit Steering in Linear Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1650-1652. doi:10.18429/JACoW-IPAC2014-TUPRI040
[n] J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1243-1246.
[n] J. Campmany and M. Traveria, “Pulsed Magnets for Injection and Extraction at LSB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP125G, pp. 2491-2493.
[n] P. J. Tipping, J. W. McKenzie, and B. L. Militsyn, “Simulations of Field Emitted Dark Current Dynamics in DC Photoinjectors”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3971-3974. doi:10.18429/JACoW-IPAC2016-THPOW018
[n] Z. Wang, C. Feng, Q. Gu, Z. T. Zhao, and L. Yu, “Operating Cascaded High-gain Harmonic Generation with Double-pulse Electron Beams”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1661-1664. doi:10.18429/JACoW-IPAC2015-TUPJE019
[n] J. C. Jan et al., “Magnetic Field Character of TPS Booster Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME037, pp. 3594-3596.
[n] Y. T. Huang et al., “Development of a Feedthrough with Small Reflection for the TPS BPM”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS029, pp. 1593-1595.
[n] J. A. Clarke et al., “CLARA - A Proposed New FEL Test Facility for the UK”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP066, pp. 1750-1752.
[n] C.-C. Chang, C. K. Chan, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and S-N. Hsu, “Manufacturing and Welding Process of Straight Section of Aluminum Alloy UHV Chambers for Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD019, pp. 2537-2539.
[n] D. Angal-Kalinin, J. W. McKenzie, B. L. Militsyn, and J. K. Jones, “Optics Design and Layout for the Electron Beam Test Facility at Daresbury Laboratory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP038, pp. 646-648.
[n] A. Luedeke, M. Bieler, J.-F. Lamarre, and M. Pont, “A Common Operation Metrics for Third Generation Light Sources”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 56-58. doi:10.18429/JACoW-IPAC2014-MOOCB02
[n] J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “Design of the Production and Measurement of Ultra-Short Electron Bunches from an S-band RF Photoinjector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD068, pp. 1560-1562.
[n] V. G. Khachatryan and M. Ivanyan, “FEL Performance with Focusing Lattice Magnets Alignment Errors”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC076, pp. 3071-3073.
[n] V. M. Tsakanov et al., “Status of 3 GeV CANDLE Synchrotron Light Facility Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF001, pp. 2254-2256.
[n] F.-Y. Lin, C.-H. Chang, C.-S. Fann, C.-S. Hwang, and C. S. Yang, “Measurement of Injection System of AC Septum Magnets for TPS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD012, pp. 3521-3523.
[n] G. S. Zanyan, V. Sahakyan, A. Sargsyan, and V. M. Tsakanov, “Low Emittance Storage Ring Design for CANDLE project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 188-190. doi:10.18429/JACoW-IPAC2014-MOPRO047
[n] I. Dolenc Kittelmann and B. Cheymol, “Longitudinal Bunch Profile Monitoring at the ESS Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP038, pp. 143-145.
[n] J. Culver, K. Antes, F. R. Huson, A. Larsson, C. R. Meitzler, and L. Xiu, “Progress in H- ion Source Development at TAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2008-2011.
[n] Y. T. Huang, C.-C. Chang, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and H. P. Hsueh, “Design and Manufacture of TPS BPM Diamond-Edge Gasket”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD023, pp. 2549-2551.
[n] Yu. Severgin, W. Belov, A. Makarov, and M. Tarovik, “Slow Extraction of Particles Using a Thin Target for Driving for Resonance”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ14, pp. 3315-3316.
[n] J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1107-1110.
[n] J. Snuverink, W. Herr, C. Jach, J. B. Jeanneret, D. Schulte, and F. Stulle, “Impact of Dynamic Magnetic Fields on the CLIC Main Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE023, pp. 3398-3400.
[n] A. van Steenbergen, “Two-Turn Extraction from an Injector Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 246-255.
[n] Y. C. Yang, C. K. Chan, J.-R. Chen, C. M. Cheng, and G.-Y. Hsiung, “Design of the Water-Cooling System for the Vacuum System of the TPS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD022, pp. 2546-2548.
[n] G. S. Zanyan, B. Grigoryan, K. Manukyan, A. Sargsyan, and V. M. Tsakanov, “Low Emittance Booster Design for CANDLE Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC137, pp. 3209-3211.
[n] M. Ivanyan and A. V. Tsakanian, “Impedances and Wakes in Round Three-layer Ceramic Waveguide”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS046, pp. 703-705.
[n] E. M. Laziev and G. G. Oxuzian, “Radio-Frequency Radiation of High Energy Electrons”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0027, pp. 400-402.
[n] A. V. Tsakanian, G. A. Amatuni, B. Grigoryan, I. N. Margaryan, and V. M. Tsakanov, “Coupler Kick and Cavity Tilt Effects on Emittance Preservation in Linear Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4013-4015. doi:10.18429/JACoW-IPAC2014-THPRI101
[n] V. G. Khachatryan, W. Decking, A. Tarloyan, and V. M. Tsakanov, “Effect of Jitter and Quadrupole Alignment Errors on SASE FEL Performance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC013, pp. 94-96.
[n] M. H. Blewett, “Magnet Design in High- Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 317-327.
[n] J. Marroncle et al., “IFMIF-LIPAc Diagnostics and its Challenges”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper WECC01, pp. 557-565.
[n] A. Flint, E. Echeverria, A. Galdi, N. Gonzalez, J. Maxson, and C. Pennington, “Synthesis of efficient ordered sodium potassium antimonide photocathodes via molecular beam epitaxy”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1450-1453. doi:10.18429/JACoW-IPAC2025-TUPS018
[n] J. T. Seeman, W. Brunk, R. Early, M. Ross, E. Tillmann, and D. Walz, “SLC Energy Spectrum Monitor Using Synchrotron Radiation”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-6, pp. 441-443.
[n] H. P. Hsueh et al., “The Installation of One 14 Meter Cell of TPS Vacuum System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS031, pp. 1599-1601.
[n] T. L. Vardanyan et al., “ALPHA ÔÇô The THz Radiation Source based on AREAL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP083, pp. 561-563.
[n] C. Sun et al., “Compact Beam Delivery Systems for Ion Beam Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS086, pp. 3633-3635.
[n] A. Arnold, A. Hoffmann, M. H. Berndt, and P. Murcek, “Application of the plasma processing technique to the ELBE SRF gun”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP02, unpublished.
[n] Y. Zhao, R. Palmer, R. Fernow, J. Gallardo, and H. Kirk, “A Normal Conducting Accelerator for a Muon Collider Demonstration Machine”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W029, pp. 408-410.
[n] Y. Xie, G. H. Hoffstaetter, and M. Liepe, “Quench and High Field Q-SLOP Studies using a Single Cell Cavity with Artificial Pits”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO071, pp. 2465-2467.
[n] C. Jach and D. Wolff, “Main Injector Power Distribution System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO013, pp. 2679-2681.
[n] J. W. McKenzie, B. L. Militsyn, S. Thorin, and S. Werin, “MAX-IV Linac Injector Simulations including Tolerance and Jitter Analysis”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC131, pp. 3191-3193.
[n] I. Dolenc Kittelmann and T. J. Shea, “Simulations and Detector Technologies for the Beam Loss Monitoring System at the ESS Linac”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 553-558. doi:10.18429/JACoW-HB2016-THAM6Y01
[n] M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 191-193. doi:10.18429/JACoW-MEDSI2016-TUPE14
[n] H.-D. Nuhn, R. Boyce, J. Cerino, and T. Hostetler, “The SSRL Injector Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 973-976.
[n] K. Manukyan, G. A. Amatuni, B. Grigoryan, V. Sahakyan, A. Sargsyan, and G. S. Zanyan, “Beam Diagnostics for AREAL RF Photogun Linac”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB60, pp. 212-214.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2675-2677.
- M. Carl?á, G. Benedetti, T. F. G. G??nzel, U. Iriso, and Z. Mart?¡, “Local Impedance Measurements at ALBA from Turn-by-Turn Acquisition”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 598-601.
- C. S. Yang, C.-H. Chang, Y. L. Chu, T. Y. Chung, C.-S. Hwang, and F.-Y. Lin, “Design and Performance of the TPS DC Septum Magnet”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1301-1303.
- Y.-H. Liu et al., “The HV Withstands Test for In Vacuum Booster Kicker”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA043, pp. 765-767.
- Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz TESLA-type SRF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3594-3596.
- P. Songsiriritthigul et al., “Improvement of BPM System for the Siam Photon Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR053, pp. 903-905.
- F. H. Chao et al., “Room-temperature Burst-mode GHz and THz Pulse-train Photoinjector”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1492-1494.
- T. L. Vardanyan, M. Ivanyan, V. Sahakyan, A. V. Tsakanian, and G. S. Zanyan, “Modal Analysis of Helical Undulator Radiation In Cylindrical Waveguide”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1989-1991.
- G.-Y. Hsiung et al., “Progress of the Construction for the TPS Vacuum System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUODB01, pp. 976-978.
- K. Escherich et al., “Electro Polishing at DESY, A Set Up for Multi-cell Resonator Treatment”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT015, pp. XX-XX.
- M. Pont, “Operation Status of ALBA Synchrotron Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP023, pp. 1659-1661.
- B. Grigoryan et al., “Advanced Research Electron Accelerator Laboratory Based on Photocathode RF Gun”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC031, pp. 1066-1068.
- Y.-H. Liu, J.-C. Chang, C. S. Chen, H. H. Chen, and J.-R. Chen, “Conductive EMI Reduction to Kicker Magnet Power Supply in NSRRC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD059, pp. 3647-3649.
- L. Yu, Y. F. Sui, J. X. Zhao, and D. C. Zhu, “Design and Application of Double-slit Emittance Meter for C-ADS Proton Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 164-166.
- M. Kuriki et al., “High Aspect Ratio Beam Generation with the Phase-space Rotation Technique for Linear Colliders”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 685-687.
- J. W. McKenzie and B. L. Militsyn, “A Velocity Bunching Scheme for Creating Sub-picosecond Electron Bunches from an RF Photocathode Gun”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC132, pp. 3194-3196.
- R. Gobin, O. Delferriere, F. Harrault, B. Pottin, and O. Tuske, “High Intensity Helium Beam at CEA/Saclay”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-20, pp. 115-115.
- A. Salom, J. M. Alvarez, B. Bravo, and F. P?®rez, “HOM Damped Normal Conducting 1.5 GHz Cavity Design Evolution for the 3rd Harmonic System of the ALBA Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2948-2951.
- A. Sargsyan, V. Sahakyan, G. S. Zanyan, and W. Decking, “New BBA Algorithm for Electron Beam Orbit Steering in Linear Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1650-1652.
- J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1243-1246.
- J. Campmany and M. Traveria, “Pulsed Magnets for Injection and Extraction at LSB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP125G, pp. 2491-2493.
- P. J. Tipping, J. W. McKenzie, and B. L. Militsyn, “Simulations of Field Emitted Dark Current Dynamics in DC Photoinjectors”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3971-3974.
- Z. Wang, C. Feng, Q. Gu, Z. T. Zhao, and L. Yu, “Operating Cascaded High-gain Harmonic Generation with Double-pulse Electron Beams”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1661-1664.
- J. C. Jan et al., “Magnetic Field Character of TPS Booster Magnets”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME037, pp. 3594-3596.
- Y. T. Huang et al., “Development of a Feedthrough with Small Reflection for the TPS BPM”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS029, pp. 1593-1595.
- J. A. Clarke et al., “CLARA - A Proposed New FEL Test Facility for the UK”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP066, pp. 1750-1752.
- C.-C. Chang, C. K. Chan, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and S-N. Hsu, “Manufacturing and Welding Process of Straight Section of Aluminum Alloy UHV Chambers for Taiwan Photon Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD019, pp. 2537-2539.
- D. Angal-Kalinin, J. W. McKenzie, B. L. Militsyn, and J. K. Jones, “Optics Design and Layout for the Electron Beam Test Facility at Daresbury Laboratory”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP038, pp. 646-648.
- A. Luedeke, M. Bieler, J.-F. Lamarre, and M. Pont, “A Common Operation Metrics for Third Generation Light Sources”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 56-58.
- J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “Design of the Production and Measurement of Ultra-Short Electron Bunches from an S-band RF Photoinjector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD068, pp. 1560-1562.
- V. G. Khachatryan and M. Ivanyan, “FEL Performance with Focusing Lattice Magnets Alignment Errors”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC076, pp. 3071-3073.
- V. M. Tsakanov et al., “Status of 3 GeV CANDLE Synchrotron Light Facility Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF001, pp. 2254-2256.
- F.-Y. Lin, C.-H. Chang, C.-S. Fann, C.-S. Hwang, and C. S. Yang, “Measurement of Injection System of AC Septum Magnets for TPS Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD012, pp. 3521-3523.
- G. S. Zanyan, V. Sahakyan, A. Sargsyan, and V. M. Tsakanov, “Low Emittance Storage Ring Design for CANDLE project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 188-190.
- I. Dolenc Kittelmann and B. Cheymol, “Longitudinal Bunch Profile Monitoring at the ESS Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP038, pp. 143-145.
- J. Culver, K. Antes, F. R. Huson, A. Larsson, C. R. Meitzler, and L. Xiu, “Progress in H- ion Source Development at TAC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2008-2011.
- Y. T. Huang, C.-C. Chang, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and H. P. Hsueh, “Design and Manufacture of TPS BPM Diamond-Edge Gasket”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD023, pp. 2549-2551.
- Yu. Severgin, W. Belov, A. Makarov, and M. Tarovik, “Slow Extraction of Particles Using a Thin Target for Driving for Resonance”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ14, pp. 3315-3316.
- J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1107-1110.
- J. Snuverink, W. Herr, C. Jach, J. B. Jeanneret, D. Schulte, and F. Stulle, “Impact of Dynamic Magnetic Fields on the CLIC Main Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE023, pp. 3398-3400.
- A. van Steenbergen, “Two-Turn Extraction from an Injector Synchrotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 246-255.
- Y. C. Yang, C. K. Chan, J.-R. Chen, C. M. Cheng, and G.-Y. Hsiung, “Design of the Water-Cooling System for the Vacuum System of the TPS Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD022, pp. 2546-2548.
- G. S. Zanyan, B. Grigoryan, K. Manukyan, A. Sargsyan, and V. M. Tsakanov, “Low Emittance Booster Design for CANDLE Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC137, pp. 3209-3211.
- M. Ivanyan and A. V. Tsakanian, “Impedances and Wakes in Round Three-layer Ceramic Waveguide”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS046, pp. 703-705.
- E. M. Laziev and G. G. Oxuzian, “Radio-Frequency Radiation of High Energy Electrons”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0027, pp. 400-402.
- A. V. Tsakanian, G. A. Amatuni, B. Grigoryan, I. N. Margaryan, and V. M. Tsakanov, “Coupler Kick and Cavity Tilt Effects on Emittance Preservation in Linear Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4013-4015.
- V. G. Khachatryan, W. Decking, A. Tarloyan, and V. M. Tsakanov, “Effect of Jitter and Quadrupole Alignment Errors on SASE FEL Performance”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC013, pp. 94-96.
- M. H. Blewett, “Magnet Design in High- Energy Accelerators”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 317-327.
- J. Marroncle et al., “IFMIF-LIPAc Diagnostics and its Challenges”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper WECC01, pp. 557-565.
- A. Flint, E. Echeverria, A. Galdi, N. Gonzalez, J. Maxson, and C. Pennington, “Synthesis of efficient ordered sodium potassium antimonide photocathodes via molecular beam epitaxy”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS018, pp. 1450-1453.
- J. T. Seeman, W. Brunk, R. Early, M. Ross, E. Tillmann, and D. Walz, “SLC Energy Spectrum Monitor Using Synchrotron Radiation”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-6, pp. 441-443.
- H. P. Hsueh et al., “The Installation of One 14 Meter Cell of TPS Vacuum System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS031, pp. 1599-1601.
- T. L. Vardanyan et al., “ALPHA ÔÇô The THz Radiation Source based on AREAL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP083, pp. 561-563.
- C. Sun et al., “Compact Beam Delivery Systems for Ion Beam Therapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS086, pp. 3633-3635.
- A. Arnold, A. Hoffmann, M. H. Berndt, and P. Murcek, “Application of the plasma processing technique to the ELBE SRF gun”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP02, unpublished.
- Y. Zhao, R. Palmer, R. Fernow, J. Gallardo, and H. Kirk, “A Normal Conducting Accelerator for a Muon Collider Demonstration Machine”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W029, pp. 408-410.
- Y. Xie, G. H. Hoffstaetter, and M. Liepe, “Quench and High Field Q-SLOP Studies using a Single Cell Cavity with Artificial Pits”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO071, pp. 2465-2467.
- C. Jach and D. Wolff, “Main Injector Power Distribution System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO013, pp. 2679-2681.
- J. W. McKenzie, B. L. Militsyn, S. Thorin, and S. Werin, “MAX-IV Linac Injector Simulations including Tolerance and Jitter Analysis”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC131, pp. 3191-3193.
- I. Dolenc Kittelmann and T. J. Shea, “Simulations and Detector Technologies for the Beam Loss Monitoring System at the ESS Linac”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 553-558.
- M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 191-193.
- H.-D. Nuhn, R. Boyce, J. Cerino, and T. Hostetler, “The SSRL Injector Kickers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 973-976.
- K. Manukyan, G. A. Amatuni, B. Grigoryan, V. Sahakyan, A. Sargsyan, and G. S. Zanyan, “Beam Diagnostics for AREAL RF Photogun Linac”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB60, pp. 212-214.
Back to search