Warning
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] F. M. Velotti et al., “Observations of SPS Slow-Extracted Spill Quality Degradation and Possible Improvements”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 761-764. doi:10.18429/JACoW-IPAC2018-TUPAF035
[n] D. C. Larbalestier, “Superconducting Materials for Particle Accelerator Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3299-3304.
[n] Young-hwan Kim, Hyeok-jung Kwon, Yong-hwan Kim, Han-sung Kim, Sang-ho Kim,
Kang-ok Lee, Kie-hyung Chung,
Department of Nuclear Engineering, Seoul National University, Seoul, Korea, “Design of Radially Focused Uniform X-Ray Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP138, pp. 2561-2563.
[n] J. Y. Li, W. Li, G. Liu, W. Xu, and Y. Li, “Reducing HLS-II Emittance by Radiation Damping Partition Factor Exchange”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO063, pp. 2009-2011.
[n] J. H. Wang et al., “Bunch-by-Bunch Online Diagnostics at HLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC138, pp. 3309-3311.
[n] D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1536-1539.
[n] A. Miura, J. Tamura, Y. Liu, and T. Miyao, “Bunch Shape Monitor Development in J-PARC Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 271-273. doi:10.18429/JACoW-IPAC2017-MOPAB068
[n] C. Y. Wu, J. Chen, Y.-S. Cheng, K. T. Hsu, D. Lee, and C. Y. Liao, “Control System of EPU48 in TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3180-3182. doi:10.18429/JACoW-IPAC2014-THPRO123
[n] R. Chehab et al., “Experimental Determination of The Positron Source Emittance for A Crystal Target”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO452, pp. 160-162.
[n] V. Baglin et al., “The Secondary Electron Yield of Technical Materials and its Variaton with Surface Treatments”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF102, pp. 217-221.
[n] K. Mizushima et al., “Beam Spot Measurement using a Phosphor Screen for Carbon-Ion Therapy at NIRS”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB78, pp. 256-258.
[n] Y. Papaphilippou and Ch. Skokos, “Non Linear Dynamics Study of the CLIC Damping Rings Using Sympletic Integrators”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP061, pp. 682-684.
[n] N. Eddy et al., “High Resolution BPM Upgrade for the ATF Damping Ring at KEK”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD11, pp. 59-61.
[n] M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
[n] Y. Alexahin, “Circularly Inclined Solenoid Channel for 6D Ionization Cooling of Muons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU3PBC04, pp. 727-729.
[n] B. Henrist, V. Baglin, G. Bregliozzi, and P. Chiggiato, “The LHC Vacuum Pilot Sectors Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2360-2362. doi:10.18429/JACoW-IPAC2014-WEPME042
[n] L. Ceccone and V. Montabonnet, “Four Quadrant 60 A, 8 V Power Converters for LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP126, pp. 3655-3657.
[n] V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
[n] Y. Sun, “A Compact Ring Design with Tunable Momentum Compaction”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB004, pp. 82-84.
For LaTeX
Use Complete Form
For BibTeX
References
- F. M. Velotti et al., “Observations of SPS Slow-Extracted Spill Quality Degradation and Possible Improvements”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 761-764.
- D. C. Larbalestier, “Superconducting Materials for Particle Accelerator Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3299-3304.
- Young-hwan Kim, Hyeok-jung Kwon, Yong-hwan Kim, Han-sung Kim, Sang-ho Kim,
Kang-ok Lee, Kie-hyung Chung,
Department of Nuclear Engineering, Seoul National University, Seoul, Korea, “Design of Radially Focused Uniform X-Ray Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP138, pp. 2561-2563.
- J. Y. Li, W. Li, G. Liu, W. Xu, and Y. Li, “Reducing HLS-II Emittance by Radiation Damping Partition Factor Exchange”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO063, pp. 2009-2011.
- J. H. Wang et al., “Bunch-by-Bunch Online Diagnostics at HLS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC138, pp. 3309-3311.
- D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1536-1539.
- A. Miura, J. Tamura, Y. Liu, and T. Miyao, “Bunch Shape Monitor Development in J-PARC Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 271-273.
- C. Y. Wu, J. Chen, Y.-S. Cheng, K. T. Hsu, D. Lee, and C. Y. Liao, “Control System of EPU48 in TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3180-3182.
- R. Chehab et al., “Experimental Determination of The Positron Source Emittance for A Crystal Target”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO452, pp. 160-162.
- V. Baglin et al., “The Secondary Electron Yield of Technical Materials and its Variaton with Surface Treatments”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THXF102, pp. 217-221.
- K. Mizushima et al., “Beam Spot Measurement using a Phosphor Screen for Carbon-Ion Therapy at NIRS”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB78, pp. 256-258.
- Y. Papaphilippou and Ch. Skokos, “Non Linear Dynamics Study of the CLIC Damping Rings Using Sympletic Integrators”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP061, pp. 682-684.
- N. Eddy et al., “High Resolution BPM Upgrade for the ATF Damping Ring at KEK”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD11, pp. 59-61.
- M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
- Y. Alexahin, “Circularly Inclined Solenoid Channel for 6D Ionization Cooling of Muons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU3PBC04, pp. 727-729.
- B. Henrist, V. Baglin, G. Bregliozzi, and P. Chiggiato, “The LHC Vacuum Pilot Sectors Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2360-2362.
- L. Ceccone and V. Montabonnet, “Four Quadrant 60 A, 8 V Power Converters for LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP126, pp. 3655-3657.
- V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
- Y. Sun, “A Compact Ring Design with Tunable Momentum Compaction”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOEPPB004, pp. 82-84.
Back to search