JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2675-2677. doi:10.18429/JACoW-IPAC2014-WEPRI078
[n]	M. Carl?á, G. Benedetti, T. F. G. G??nzel, U. Iriso, and Z. Mart?¡, “Local Impedance Measurements at ALBA from Turn-by-Turn Acquisition”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 598-601. doi:10.18429/JACoW-IPAC2016-MOPOR007
[n]	C. S. Yang, C.-H. Chang, Y. L. Chu, T. Y. Chung, C.-S. Hwang, and F.-Y. Lin, “Design and Performance of the TPS DC Septum Magnet”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1301-1303. doi:10.18429/JACoW-IPAC2014-TUPRO108
[n]	Y.-H. Liu et al., “The HV Withstands Test for In Vacuum Booster Kicker”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA043, pp. 765-767. 
[n]	Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz TESLA-type SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3594-3596. doi:10.18429/JACoW-IPAC2015-WEPWI046
[n]	P. Songsiriritthigul et al., “Improvement of BPM System for the Siam Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR053, pp. 903-905. 
[n]	F. H. Chao et al., “Room-temperature Burst-mode GHz and THz Pulse-train Photoinjector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1492-1494. doi:10.18429/JACoW-IPAC2014-TUPME055
[n]	T. L. Vardanyan, M. Ivanyan, V. Sahakyan, A. V. Tsakanian, and G. S. Zanyan, “Modal Analysis of Helical Undulator Radiation In Cylindrical Waveguide”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1989-1991. doi:10.18429/JACoW-IPAC2014-WEPRO022
[n]	G.-Y. Hsiung et al., “Progress of the Construction for the TPS Vacuum System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUODB01, pp. 976-978. 
[n]	K. Escherich et al., “Electro Polishing at DESY, A Set Up for Multi-cell Resonator Treatment”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT015, pp. XX-XX. 
[n]	M. Pont, “Operation Status of ALBA Synchrotron Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP023, pp. 1659-1661. 
[n]	B. Grigoryan et al., “Advanced Research Electron Accelerator Laboratory Based on Photocathode RF Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC031, pp. 1066-1068. 
[n]	Y.-H. Liu, J.-C. Chang, C. S. Chen, H. H. Chen, and J.-R. Chen, “Conductive EMI Reduction to Kicker Magnet Power Supply in NSRRC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD059, pp. 3647-3649. 
[n]	L. Yu, Y. F. Sui, J. X. Zhao, and D. C. Zhu, “Design and Application of Double-slit Emittance Meter for C-ADS Proton Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 164-166. doi:10.18429/JACoW-IPAC2016-MOPMB034
[n]	M. Kuriki et al., “High Aspect Ratio Beam Generation with the Phase-space Rotation Technique for Linear Colliders”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 685-687. doi:10.18429/JACoW-LINAC2018-THPO005
[n]	J. W. McKenzie and B. L. Militsyn, “A Velocity Bunching Scheme for Creating Sub-picosecond Electron Bunches from an RF Photocathode Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC132, pp. 3194-3196. 
[n]	R. Gobin, O. Delferriere, F. Harrault, B. Pottin, and O. Tuske, “High Intensity Helium Beam at CEA/Saclay”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-20, pp. 115-115. 
[n]	A. Salom, J. M. Alvarez, B. Bravo, and F. P?®rez, “HOM Damped Normal Conducting 1.5 GHz Cavity Design Evolution for the 3rd Harmonic System of the ALBA Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2948-2951. doi:10.18429/JACoW-IPAC2019-WEPRB060
[n]	A. Sargsyan, V. Sahakyan, G. S. Zanyan, and W. Decking, “New BBA Algorithm for Electron Beam Orbit Steering in Linear Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1650-1652. doi:10.18429/JACoW-IPAC2014-TUPRI040
[n]	J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1243-1246. 
[n]	J. Campmany and M. Traveria, “Pulsed Magnets for Injection and Extraction at LSB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP125G, pp. 2491-2493. 
[n]	P. J. Tipping, J. W. McKenzie, and B. L. Militsyn, “Simulations of Field Emitted Dark Current Dynamics in DC Photoinjectors”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3971-3974. doi:10.18429/JACoW-IPAC2016-THPOW018
[n]	Z. Wang, C. Feng, Q. Gu, Z. T. Zhao, and L. Yu, “Operating Cascaded High-gain Harmonic Generation with Double-pulse Electron Beams”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1661-1664. doi:10.18429/JACoW-IPAC2015-TUPJE019
[n]	J. C. Jan et al., “Magnetic Field Character of TPS Booster Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME037, pp. 3594-3596. 
[n]	Y. T. Huang et al., “Development of a Feedthrough with Small Reflection for the TPS BPM”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS029, pp. 1593-1595. 
[n]	J. A. Clarke et al., “CLARA - A Proposed New FEL Test Facility for the UK”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP066, pp. 1750-1752. 
[n]	C.-C. Chang, C. K. Chan, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and S-N. Hsu, “Manufacturing and Welding Process of Straight Section of Aluminum Alloy UHV Chambers for Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD019, pp. 2537-2539. 
[n]	D. Angal-Kalinin, J. W. McKenzie, B. L. Militsyn, and J. K. Jones, “Optics Design and Layout for the Electron Beam Test Facility at Daresbury Laboratory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP038, pp. 646-648. 
[n]	A. Luedeke, M. Bieler, J.-F. Lamarre, and M. Pont, “A Common Operation Metrics for Third Generation Light Sources”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 56-58. doi:10.18429/JACoW-IPAC2014-MOOCB02
[n]	J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “Design of the Production and Measurement of Ultra-Short Electron Bunches from an S-band RF Photoinjector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD068, pp. 1560-1562. 
[n]	V. G. Khachatryan and M. Ivanyan, “FEL Performance with Focusing Lattice Magnets Alignment Errors”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC076, pp. 3071-3073. 
[n]	V. M. Tsakanov et al., “Status of 3 GeV CANDLE Synchrotron Light Facility Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF001, pp. 2254-2256. 
[n]	F.-Y. Lin, C.-H. Chang, C.-S. Fann, C.-S. Hwang, and C. S. Yang, “Measurement of Injection System of AC Septum Magnets for TPS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD012, pp. 3521-3523. 
[n]	G. S. Zanyan, V. Sahakyan, A. Sargsyan, and V. M. Tsakanov, “Low Emittance Storage Ring Design for CANDLE project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 188-190. doi:10.18429/JACoW-IPAC2014-MOPRO047
[n]	I. Dolenc Kittelmann and B. Cheymol, “Longitudinal Bunch Profile Monitoring at the ESS Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP038, pp. 143-145. 
[n]	J. Culver, K. Antes, F. R. Huson, A. Larsson, C. R. Meitzler, and L. Xiu, “Progress in H- ion Source Development at TAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2008-2011. 
[n]	Y. T. Huang, C.-C. Chang, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and H. P. Hsueh, “Design and Manufacture of TPS BPM Diamond-Edge Gasket”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD023, pp. 2549-2551. 
[n]	Yu. Severgin, W. Belov, A. Makarov, and M. Tarovik, “Slow Extraction of Particles Using a Thin Target for Driving for Resonance”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ14, pp. 3315-3316. 
[n]	J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1107-1110. 
[n]	J. Snuverink, W. Herr, C. Jach, J. B. Jeanneret, D. Schulte, and F. Stulle, “Impact of Dynamic Magnetic Fields on the CLIC Main Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE023, pp. 3398-3400. 
[n]	A. van Steenbergen, “Two-Turn Extraction from an Injector Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 246-255. 
[n]	Y. C. Yang, C. K. Chan, J.-R. Chen, C. M. Cheng, and G.-Y. Hsiung, “Design of the Water-Cooling System for the Vacuum System of the TPS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD022, pp. 2546-2548. 
[n]	G. S. Zanyan, B. Grigoryan, K. Manukyan, A. Sargsyan, and V. M. Tsakanov, “Low Emittance Booster Design for CANDLE Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC137, pp. 3209-3211. 
[n]	M. Ivanyan and A. V. Tsakanian, “Impedances and Wakes in Round Three-layer Ceramic Waveguide”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS046, pp. 703-705. 
[n]	E. M. Laziev and G. G. Oxuzian, “Radio-Frequency Radiation of High Energy Electrons”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0027, pp. 400-402. 
[n]	A. V. Tsakanian, G. A. Amatuni, B. Grigoryan, I. N. Margaryan, and V. M. Tsakanov, “Coupler Kick and Cavity Tilt Effects on Emittance Preservation in Linear Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4013-4015. doi:10.18429/JACoW-IPAC2014-THPRI101
[n]	V. G. Khachatryan, W. Decking, A. Tarloyan, and V. M. Tsakanov, “Effect of Jitter and Quadrupole Alignment Errors on SASE FEL Performance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC013, pp. 94-96. 
[n]	M. H. Blewett, “Magnet Design in High- Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 317-327. 
[n]	J. Marroncle et al., “IFMIF-LIPAc Diagnostics and its Challenges”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper WECC01, pp. 557-565. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search